P6 FORTIS upper receiver assembly for M4 AEG

Designed to achieve ultimate consistency, the Friction Pro hop-up bucking focuses on creating a perfectly centered axis of spin in every shot. While based on a rather traditional single-point design, the unique contour of the contact patch generates enough friction to even lift heavy BBs up to 0.48 grams, while minimizing contact surface to ensure there’s no room for error. Resulting in a flat, consistent, and accurate trajectory! 

Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

• For AEG airsoft barrel
• Larger & wider contact patch for better hop effect with heavy BB's
• The design in the shape like a "shield" ensures better support of the hop up with the support levers
• The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 50 Degree (green)

Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

• For AEG airsoft barrel
• Larger & wider contact patch for better hop effect with heavy BB's
• The design in the shape like a "shield" ensures better support of the hop up with the support levers
• The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 60 Degree (yellow)

Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

• For AEG airsoft barrel
• Larger & wider contact patch for better hop effect with heavy BB's
• The design in the shape like a "shield" ensures better support of the hop up with the support levers
• The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 70 Degree (blue)

Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

• For AEG airsoft barrel
• Larger & wider contact patch for better hop effect with heavy BB's
• The design in the shape like a "shield" ensures better support of the hop up with the support levers
• The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 75 Degree (pink)

If your hop-up adjustment is not having a big effect on the hop-up of your BBs, then it probably means that your hop-up packing is worn down and is not gripping the BB properly before it is fired out. A new hop-up packing will allow more accurate hop-up adjustments. Tested and approved by RedWolf. Best used on guns that shoot below 400fps.

The Modify BATON RYUSOKU Flat Hop Up Bucking is designed for stabilizing the hop when using 0.25 BBs or more

• Friendly use
• Efficiently improves the accuracy.
• Stabilize and extend the trajectory

The Modify BATON RYUSOKU Flat Hop Up Bucking is designed for stabilizing the hop when using 0.2 BBs

• Friendly use
• Efficiently improves the accuracy.
• Stabilize and extend the trajectory

Maple Leaf Super Macaron is aspecial developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!

This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

• Optimal inner and outer Sealing
• Accuracy and Range Improvement
• Easy to install
• Fits AEG Bridged Barrels
• Fits GBB / VSR Unbridged Barrel

Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

The degrees of the buckings

The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

The compatibility of the bucking

The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!

This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

• Optimal inner and outer Sealing
• Accuracy and Range Improvement
• Easy to install
• Fits AEG Bridged Barrels
• Fits GBB / VSR Unbridged Barrel

Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

The degrees of the buckings

The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!

This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

• Optimal inner and outer Sealing
• Accuracy and Range Improvement
• Easy to install
• Fits AEG Bridged Barrels
• Fits GBB / VSR Unbridged Barrel

Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

The degrees of the buckings

The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!

This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

• Optimal inner and outer Sealing
• Accuracy and Range Improvement
• Easy to install
• Fits AEG Bridged Barrels
• Fits GBB / VSR Unbridged Barrel

Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

The degrees of the buckings

The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.