> >>Complete HPA pack EU version
Sale! Complete HPA pack EU version - View larger

Complete HPA pack EU version

BA-HPA-EUPACK

New product

In stock

Moyenne des votes pour ce produit
5.0 / 5
Moyenne : 5.0 / 5
Basée sur 3 avis clients.

Configure

Si vous souhaitez enregistrer votre configuration, vous devez d'abord vous connecter.

Connexion

Customize your product

10% discount

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Balystik HPR800C HPA Regulator

    The HPR800C is a very strong regulator, the output pressure can be adjusted instantly up and down using the special square key (delivered). It also have 2 X 1/8 NPT output threads to connect a second line.

    • Entry pressure : 800 - 1500 PSI
    • Output pressure : 40 - 160 PSI
    • Large jauge
    • Aluminium made
    • Easy pressure adjustement
    • Entry thread : ASA
    • Output thread : 1/8 NPT female X 2
    • Comes with an Integrated tournament lock system
    • Weight : 320gr

    Included in the package :

    • HPR800C Regulator
    • Pressure adjustement key
    • Tournament Lock Aluminium cap

    Please note the regulator does not include any male or female connector

    52,43 €
    Balystik HPR800C HPA Regulator

    52,43 €

10% discount

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Balystik HPA braided line complete set EU version black

    The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so you can disconnect your gun and keep your line under pressure, you can also disconnect the line from the regulator and keep the regulator under pressure. the connect / disconnect system is ultra fast, reliable and save air consumption. All is included to connect a regulator with 1/8 NPT female thread to 6mm macroline of HPA systems like Wolverine, Polarstar, Valken HPA gearbox.

    • Line external diameter : 8mm
    • Line length : 1 meter
    • Nylon braided
    • Max input pressure : 180 PSI
    • EU version connectors

    It is strongly advised to use light thread locker on the 1/8 NPT regulator thread instead of PTFE / teflon tape to get a perfect seal.

    29,93 €
    Balystik HPA braided line complete set EU version black

    29,93 €

  • Balystik HPA braided line complete set EU version Dark Earth

    The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so you can disconnect your gun and keep your line under pressure, you can also disconnect the line from the regulator and keep the regulator under pressure. the connect / disconnect system is ultra fast, reliable and save air consumption. All is included to connect a regulator with 1/8 NPT female thread to 6mm macroline of HPA systems like Wolverine, Polarstar, Valken HPA gearbox.

    • Line external diameter : 8mm
    • Line length : 1 meter
    • Nylon braided
    • Max input pressure : 180 PSI
    • EU version connectors

    It is strongly advised to use light thread locker on the 1/8 NPT regulator thread instead of PTFE / teflon tape to get a perfect seal.

    29,93 €
    Balystik HPA braided line complete set EU version Dark Earth

    29,93 €

  • Balystik HPA braided line complete set EU version Red

    The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so you can disconnect your gun and keep your line under pressure, you can also disconnect the line from the regulator and keep the regulator under pressure. the connect / disconnect system is ultra fast, reliable and save air consumption. All is included to connect a regulator with 1/8 NPT female thread to 6mm macroline of HPA systems like Wolverine, Polarstar, Valken HPA gearbox.

    • Line external diameter : 8mm
    • Line length : 1 meter
    • Nylon braided
    • Max input pressure : 180 PSI
    • EU version connectors

    It is strongly advised to use light thread locker on the 1/8 NPT regulator thread instead of PTFE / teflon tape to get a perfect seal.

    29,93 €
    Balystik HPA braided line complete set EU version Red

    29,93 €

  • Balystik HPA braided line complete set EU version Yellow

    The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so you can disconnect your gun and keep your line under pressure, you can also disconnect the line from the regulator and keep the regulator under pressure. the connect / disconnect system is ultra fast, reliable and save air consumption. All is included to connect a regulator with 1/8 NPT female thread to 6mm macroline of HPA systems like Wolverine, Polarstar, Valken HPA gearbox.

    • Line external diameter : 8mm
    • Line length : 1 meter
    • Nylon braided
    • Max input pressure : 180 PSI
    • EU version connectors

    It is strongly advised to use light thread locker on the 1/8 NPT regulator thread instead of PTFE / teflon tape to get a perfect seal.

    29,93 €
    Balystik HPA braided line complete set EU version Yellow

    29,93 €

  • Balystik HPA braided line complete set EU version pink

    The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so you can disconnect your gun and keep your line under pressure, you can also disconnect the line from the regulator and keep the regulator under pressure. the connect / disconnect system is ultra fast, reliable and save air consumption. All is included to connect a regulator with 1/8 NPT female thread to 6mm macroline of HPA systems like Wolverine, Polarstar, Valken HPA gearbox.

    • Line external diameter : 8mm
    • Line length : 1 meter
    • Nylon braided
    • Max input pressure : 180 PSI
    • EU version connectors

    It is strongly advised to use light thread locker on the 1/8 NPT regulator thread instead of PTFE / teflon tape to get a perfect seal.

    29,93 €
    Balystik HPA braided line complete set EU version pink

    29,93 €

  • Balystik HPA braided line complete set EU version lime green

    The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so you can disconnect your gun and keep your line under pressure, you can also disconnect the line from the regulator and keep the regulator under pressure. the connect / disconnect system is ultra fast, reliable and save air consumption. All is included to connect a regulator with 1/8 NPT female thread to 6mm macroline of HPA systems like Wolverine, Polarstar, Valken HPA gearbox.

    • Line external diameter : 8mm
    • Line length : 1 meter
    • Nylon braided
    • Max input pressure : 180 PSI
    • EU version connectors

    It is strongly advised to use light thread locker on the 1/8 NPT regulator thread instead of PTFE / teflon tape to get a perfect seal.

    29,93 €
    Balystik HPA braided line complete set EU version lime green

    29,93 €

  • Balystik HPA braided line complete set EU version Purple

    The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so you can disconnect your gun and keep your line under pressure, you can also disconnect the line from the regulator and keep the regulator under pressure. the connect / disconnect system is ultra fast, reliable and save air consumption. All is included to connect a regulator with 1/8 NPT female thread to 6mm macroline of HPA systems like Wolverine, Polarstar, Valken HPA gearbox.

    • Line external diameter : 8mm
    • Line length : 1 meter
    • Nylon braided
    • Max input pressure : 180 PSI
    • EU version connectors

    It is strongly advised to use light thread locker on the 1/8 NPT regulator thread instead of PTFE / teflon tape to get a perfect seal.

    29,93 €
    Balystik HPA braided line complete set EU version Purple

    29,93 €

  • Balystik HPA braided line complete set EU version deep coffe

    The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so you can disconnect your gun and keep your line under pressure, you can also disconnect the line from the regulator and keep the regulator under pressure. the connect / disconnect system is ultra fast, reliable and save air consumption. All is included to connect a regulator with 1/8 NPT female thread to 6mm macroline of HPA systems like Wolverine, Polarstar, Valken HPA gearbox.

    • Line external diameter : 8mm
    • Line length : 1 meter
    • Nylon braided
    • Max input pressure : 180 PSI
    • EU version connectors

    It is strongly advised to use light thread locker on the 1/8 NPT regulator thread instead of PTFE / teflon tape to get a perfect seal.

    29,93 €
    Balystik HPA braided line complete set EU version deep coffe

    29,93 €

  • Balystik HPA braided line complete set EU version blue

    The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so you can disconnect your gun and keep your line under pressure, you can also disconnect the line from the regulator and keep the regulator under pressure. the connect / disconnect system is ultra fast, reliable and save air consumption. All is included to connect a regulator with 1/8 NPT female thread to 6mm macroline of HPA systems like Wolverine, Polarstar, Valken HPA gearbox.

    • Line external diameter : 8mm
    • Line length : 1 meter
    • Nylon braided
    • Max input pressure : 180 PSI
    • EU version connectors

    It is strongly advised to use light thread locker on the 1/8 NPT regulator thread instead of PTFE / teflon tape to get a perfect seal.

    29,93 €
    Balystik HPA braided line complete set EU version blue

    29,93 €

  • Balystik HPA braided line complete set EU version deep grey

    The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so you can disconnect your gun and keep your line under pressure, you can also disconnect the line from the regulator and keep the regulator under pressure. the connect / disconnect system is ultra fast, reliable and save air consumption. All is included to connect a regulator with 1/8 NPT female thread to 6mm macroline of HPA systems like Wolverine, Polarstar, Valken HPA gearbox.

    • Line external diameter : 8mm
    • Line length : 1 meter
    • Nylon braided
    • Max input pressure : 180 PSI
    • EU version connectors

    It is strongly advised to use light thread locker on the 1/8 NPT regulator thread instead of PTFE / teflon tape to get a perfect seal.

    29,93 €
    Balystik HPA braided line complete set EU version deep grey

    29,93 €

  • Balystik HPA braided line complete set EU version olive

    The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so you can disconnect your gun and keep your line under pressure, you can also disconnect the line from the regulator and keep the regulator under pressure. the connect / disconnect system is ultra fast, reliable and save air consumption. All is included to connect a regulator with 1/8 NPT female thread to 6mm macroline of HPA systems like Wolverine, Polarstar, Valken HPA gearbox.

    • Line external diameter : 8mm
    • Line length : 1 meter
    • Nylon braided
    • Max input pressure : 180 PSI
    • EU version connectors

    It is strongly advised to use light thread locker on the 1/8 NPT regulator thread instead of PTFE / teflon tape to get a perfect seal.

    29,93 €
    Balystik HPA braided line complete set EU version olive

    29,93 €

  • Balystik HPA mini mamba line complete set EU version

    The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so you can disconnect your gun and keep your line under pressure, you can also disconnect the line from the regulator and keep the regulator under pressure. the connect / disconnect system is ultra fast, reliable and save air consumption. All is included to connect a regulator with 1/8 NPT female thread to 6mm macroline of HPA systems like Wolverine, Polarstar, Valken HPA gearbox.

    • Line external diameter : 6mm
    • Line length : 35cm (retracted) 300cm (extended)
    • Max input pressure : 150 PSI
    • EU version connectors

    It is strongly advised to use light thread locker on the 1/8 NPT regulator thread instead of PTFE / teflon tape to get a perfect seal.

    26,17 €
    Balystik HPA mini mamba line complete set EU version

    26,17 €

10% discount

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Balystik 0.2L 3000psi Alu HPA Tank with HP preset

    Balystik strikes again in the HPA universe and present a new range of high pressure cylinders. This tank is made of aluminum with steel base and will provide all the rigor expected of a reliable, efficient and safe product. The volume of this cylinder is 0,2 liters (13 ci) in with a maximum pressure of 3000psi (200 bar).


    Technical details :

    •      Tank and regulator with Pi certification
    •      Operating pressure: 200 BAR / 3000 PSI max
    •      Output pressure: 800 PSI
    •      5000 PSI mini pressure gauge
    •      Filling valve with filter and Protective cap
    •      Protective cap for ASA threaded outlet

    37,42 €
    Balystik 0.2L 3000psi Alu HPA Tank with HP preset

    37,42 €

  • Balystik 0.8L 3000psi Alu HPA Tank with HP preset

    Balystik strikes again in the HPA universe and present a new range of high pressure cylinders. This tank is made of aluminum with steel base and will provide all the rigor expected of a reliable, efficient and safe product. The volume of this cylinder is 0,8 liters (48 ci) in with a maximum pressure of 3000psi (200 bar).

    Technical details :

    •      Tank and regulator with Pi certification
    •      Operating pressure: 200 BAR / 3000 PSI max
    •      Output pressure: 800 PSI
    •      5000 PSI mini pressure gauge
    •      Filling valve with filter and Protective cap
    •      Protective cap for ASA threaded outlet

    41,18 €
    Balystik 0.8L 3000psi Alu HPA Tank with HP preset

    41,18 €

You can ask our workshop to install the regulator side coupler before your pack shipped. We use light thread locker to insure strong seal and prevent any leak.

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 0 quantité(s)

  • Install the regulator side coupler (free)

    Install the regulator side coupler (free)

10% discount

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Balystik braided line for HPA replica - Black EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and an additional finishing touch for your replica, ideal for supplying your replica with air in a high-performance and leak-free way during your airsoft games !

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    12,67 €
    Balystik braided line for HPA replica - Black EU

    12,67 €

  • Balystik braided line for HPA replica - Deep coffee EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    12,67 €
    Balystik braided line for HPA replica - Deep coffee EU

    12,67 €

  • Balystik braided line for HPA replica - Grey EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    12,67 €
    Balystik braided line for HPA replica - Grey EU

    12,67 €

  • Balystik braided line for HPA replica - Tan EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    12,67 €
    Balystik braided line for HPA replica - Tan EU

    12,67 €

  • Balystik braided line for HPA replica - OD EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    12,67 €
    Balystik braided line for HPA replica - OD EU

    12,67 €

  • Balystik braided line for HPA replica - OD US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    12,67 €
    Balystik braided line for HPA replica - OD US

    12,67 €

  • Balystik braided line for HPA replica - Tan US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    12,67 €
    Balystik braided line for HPA replica - Tan US

    12,67 €

  • Balystik braided line for HPA replica - Black US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    12,67 €
    Balystik braided line for HPA replica - Black US

    12,67 €

  • Balystik braided line for HPA replica - Grey US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    12,67 €
    Balystik braided line for HPA replica - Grey US

    12,67 €

  • Balystik braided line for HPA replica - Deep coffee US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    12,67 €
    Balystik braided line for HPA replica - Deep coffee US

    12,67 €

Save 15% on HPA batteries by adding them with your custom replica !

Qiantité totale 0

Vous pouvez ajouter un maximum de 100 quantités

  • ASG 7.4V 250mah 20C lipo battery for HPA

    This LI-PO battery is made for HPA powered Airsoft guns. Designed to be as small and compact as possible. It can easily be built in to pistol grips or stocks, where it powers the HPA FCU. Comes with with a JST Discharge plug. 
    5,60 €
    ASG 7.4V 250mah 20C lipo battery for HPA

    6,58 € 5,60 €

  • TITAN POWER 7.4V 350mah Li-ion Battery

    Under Discharge, Over Charge, and Short Protection
    Titan Power HPA batteries are protected from active-drawing HPA systems such as Polarstar and Wolverine, and will never allow itself to die like lipos, charge too much, or short circuit.

    No Puff
    Titan Power batteries will never puff and become unsafe like lipos will that have been either neglected or simply aged over time.

    No Memory
    Titan Power batteries can be charged from empty or nearly full without damaging the battery. Even if your battery gets low and your device cannot cycle, the battery is still within is safe operating range and can be charged safely back to 100%.

    No Fade / Lasts Forever
    Titan Power batteries can hold a charge for months and still be ready to use on game day. An extreme example is a pack used for testing, charged in 2012, which still holds 88% of its life in 2018. These packs can also be charged over 300 times and still store 80% of its original capacity.

    Warrantied
    Product claims sound too good to be true? Titan Power backs their US Arkansas based products with a 1 year warranty as long as the battery pack has not been modified.

    14,10 €
    TITAN POWER 7.4V 350mah Li-ion Battery

    16,58 € 14,10 €

  • VB Power 7.4v 300mah lipo battery for HPA

    Suitable for Wolverine & Polarstar FCUs

    6,30 €
    VB Power 7.4v 300mah lipo battery for HPA

    7,42 € 6,30 €

Remises par quantités

arrow_drop_downRécapitulatif :

Total :

Partagez votre création avec vos amis.

More info

This pack brings everything you need to power your HPA replica, it includes :

  • HPA regulator
  • HPA line with EU type connectors
  • HPA tank

The pack will make you save 10% on each product unit price

Customization

After saving your customized product, remember to add it to your cart.

loader

* required fields

Balystik

Balystik

Balystik is a French brand specialized in airsoft accessories since 2013. Some products are directly made in France (like DBS inner barrels) or Taiwan & China. They have innovative products for AEG and HPA.

See all products from Balystik

Questions 

Pas de question client pour le moment.

Seuls les utilisateurs enregistrés peuvent poser une question. Login

Avis (2)

Seuls les clients enregistrés peuvent poster un avis. Connectez-vous ou créez un compte .
Tri:
5/5
VAT notification
Hello,As per my last order it took me some time to understand that VAT was added to my order. For example the showed price without log on is lower, after log the VAT for delivery to my country was added automatically, but, I was not received any notification that this price difference is because of the additional VAT. So, a suggestion, please, add such notification, that price is with VAT for the destination...Thank you!
Cet avis a été posté pour Complete HPA pack EU version
Team P6
Hello, thanks a lot for your feed back. When you are not logged in with a delivery adress, the system detect your country with an IP detector, but if you run some kind of VPN thats impossible for the system to display correct price and has ceriantly located you out of European community. We currently work on a better system to prevent this problem. Tanks for your trust anyway. Best regards
5/5
Super
Produits de bonne qualité à un prix très intéressant et livraison rapide.
Cet avis a été posté pour Complete HPA pack EU version
Voir plus d'avis