> >>300 bars electric compressor for HPA tank
300 bars electric compressor for HPA tank - View larger
Previous Next

300 bars electric compressor for HPA tank

A73410

New product

In stock

Moyenne des votes pour ce produit
0 / 5
Moyenne : 0 / 5
Basée sur 0 avis clients.

524,92 € tax excl.

Si vous souhaitez enregistrer votre configuration, vous devez d'abord vous connecter.

Connexion

More info

Be ready to play or shoot by filling your air tanks directly at home. Compact 4500 PSI compressor allow to charge your air bottles for shooting, paintball or airsoft. This mini compressor allows to fill in a few minutes a bottle of air from 0.8 liter to 200 bar (2900 PSI / 200 mPa). The compressor can supply air up to 4500 PSI (310 bar) and has a pressure gauge equipped with a variable adjustment to automatically stop the device when the desired pressure is reached.

  •     Delivered with oil, please have a regular check of levels (oil is 5w40).
  •     Replace the oil plug with the ventilation rod.
  •     Built-in thermometer, let the water pump run for a few minutes after the end of compression to cool the compressor.
  •     Air filter with interchangeable cartridges (8 supplied)
  •     water cooling : Provide a water tank and place the water pump and the return pipe in the tank. (water tank not supplied)
  •     For bottles of 0.2 to 1 liter. Charge 0.5 l at 30 bar in 4.5 min.
  •     Works in 220v, 1.6kW, EU electric plug, 82dB.
  •     Sold without the air tank showed in the picture

* Photo not contractual, the color of the compressor little varied (Red, blue ..)

Accessories

Air Tanks useful tips

Always :

  • Keep the thread and inside of your tank away from oil, dirt or other contaminants.
  • Make sure your tank has not passed the re-test date. Bottles must be inspected and hydrostatically tested as follows: Aluminum tank : every 10 years. Composite tank : every 5 years (composite bottles have a maximum life of 15 years from the first hydrostatic test)
  • Keep the outside of your bottle clean and use only mild or neutral detergent when necessary. Make sure the bottle is completely dry after cleaning.
  • Store in a dry, cool and adequately ventilated place.
  • Have your bottle serviced by a qualified person only.
  • Make sure all accessories in the bottle are serviced, reviewed, inspected and handled in strict accordance with the manufacturer's instructions.
  • Have the cylinder checked or hydrostatically retested if it shows signs of corrosion, holes or dents, if it has been damaged by heat, a fall, or other.
  • Make sure there is no leak before each job. In the event that a leak is detected, the tank must not be refilled under any circumstances.
  • Check that the cylinder to be filled with air has a working pressure (PW) engraved on the crown (for all aluminum bottles) or printed on the label (for all composite bottles) which should not be exceeded by the filling apparatus. Fill compressed air to less than 40 bar (600 psi) per minute at the service pressure (PW) indicated on the cylinder.

Never :

  • Modify or darken the markings on the bottle.
  • Let your bottle roll during your travels.
  • Drop, knock or heat your bottle.
  • Expose your bottle to excessive heat (> 50 ° C).
  • Attempt to change the thread or force a valve inside the bottle.
  • Attempt to remove metal from the bottle by any means, as this will render the cylinder unsuitable for its nominal pressure.
  • Modify your bottle by adding additional openings for gauges or filling tips.
  • Repaint the bottle with paints that require high temperature cooking. Only use air-drying paints. Do not use caustic paint strippers or corrosive cleaners as they will damage the bottle.
  • Use the bottle for something other than its intended use.
  • Request that the bottle be filled beyond its nominal capacity. An overflow is dangerous.
  • Use or have your bottle filled if it leaks or if you suspect it is damaged. In this case, refer the bottle to an authorized specialist for a detailed visual inspection.
  • Fill a bottle that has exceeded its date of inspection and periodic retest.
  • Change your bottle in any way or add unauthorized accessories. Unauthorized modifications are illegal and could make the bottle unsafe.
  • Never fill a bottle of compressed air with Co2, you would put yourself in serious danger.

The bottles we ship are empty, we do not have the right to ship pressurized compressed air containers.

You can find the EU legislation on compressed air containers on the website of the French federation of Paintball.

Questions  (4)

A partir de Ermo | 2022-07-21 10:11:22

Does it fit on US air plugs?

Powair6

Hello, it is universal to all HPA airsoft bottles.
Best regards,

A partir de Wilfried V | 2019-05-25 22:27:26

Bonjour.

Je débute

Esque je peut charger une bouteille de 1.1 L a 4500 PSI ?

Powair6

Oui sans problème

A partir de Wilfried Verstraete | 2019-05-24 22:26:28

Bonjour

Esque je peux remplir une bouteille de 1.1 L avec se groupe ?

Powair6

Bonjour, sans aucun problème Cdt

A partir de Thierry M | 2019-05-01 19:20:33

Y a t'il un mode d'emploi, car si je compte l'acheter prochainement je suis novice dans le monde du HPA. Combien de bar pour une bouteille de 0,20l, 0,40l, 0,80l?

Powair6

Bonjour, un mode d'emploi est livré avec mais cela reste succinct . Vous pouvez ajuster le nombre de bar en fonction du type de bouteille. Si vous n'y connaissez vraiment rien, il est préférable de nous téléphoner avant achat, nous vous expliqueront son fonctionnement. Cdt

Page: 1
Seuls les utilisateurs enregistrés peuvent poser une question. Login

Avis

Seuls les clients enregistrés peuvent poster un avis. Connectez-vous ou créez un compte .
Tri:

Aucun avis pour le moment.