> >>Wolverine MTW Inferno Billet series workshop custom
Wolverine MTW Inferno Billet series workshop custom - View larger
Previous Next

Wolverine MTW Inferno Billet series workshop custom

P6-HPA-MTW-BILLET

New product

In stock

Moyenne des votes pour ce produit
5.0 / 5
Moyenne : 5.0 / 5
Basée sur 1 avis clients.

Configure

Si vous souhaitez enregistrer votre configuration, vous devez d'abord vous connecter.

Connexion

Customize your product

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Wolverine MTW Inferno Billet Series 10 inch

    The MTW platform is designed to be more than just a new product, it’s designed to be a whole ecosystem in which the customer can exist and can use all of the products which we’ve developed over the past few years in seamless harmony. No more modifications, no more alignment issues, no more low quality AEG bodies. This platform truly takes pneumatic systems for airsoft to the next level as it unshackles them from the restrictions of being an aftermarket modification and instead designs the platform around all the incredible potential our HPA technology has to offer.

    Technical Highlights :
    • True tool-less disassembly exactly like standard AR-15 platform
    • Empty mag detection and functional bolt catch when used with Wolverine Airsoft Magazines
    • Intrinsically aligned
    • Compatible with any standard AEG magazine
    • Custom designed rotary hop for ease of service and adjustment and optimal shooting performance
    • Compatible with many aftermarket AEG hop ups
    • Compatible with standard AEG hand guard, hop rubber and barrel
    • Bolt on compatibility with Wraith CO2 stock, Wraith AERO (tank) stock, and QUAKE recoil stock
    • Include Inferno GEN2 HPA engine
    • Compatible with real steal AR grips, stocks, takedown pins, trigger guard, buffer tubes, and more
    • Forged Lower Receiver new design
    • Extruded Slick Side Upper receiver
    • Invictus M-Lok rail with proprietary mounting system
    • CNC Aluminum Barrel
    • US connector
    • Each system assembled and installed by a certified Wolverine Airsoft tech
    • Each gun is thoroughly tested, shot, and checked by Wolverine Airsoft tech before shipped

    Comes without tank, battery, regulator

    The power of the replica depends on the operating pressure that you set on the regulator, it is appropriate for each player to have a speed control system in order to verify that the energy developed by the replica does not exceed the legal limits of your country.

    819,90 €
    Wolverine MTW Inferno Billet Series 10 inch

    819,90 €

  • Wolverine MTW Inferno Billet Series Tactical Gen3 -10 inch

    The Wolverine MTW Billet Gen 3 Tactical is a sleek-looking and durable HPA airsoft replica that offers excellent performances thanks to the high-quality internals and exterior.

    The exterior of the replica is made of high-quality aluminium, which is finished with a black mil-spec coating. The Invictus MK-1 handguard features a Weaver/Picatinny mounting rail across the top and it contains multiple M-LOK slots all around. These M-LOK slots can be used for mounting a variety of accessories and also ensure that the total weight of the handguard is significantly lower than a handguard fully equipped with Weaver/Picatinny rails. To complement the look of the replica, a steel flash hider is included. This flash hider is finished with a black oxide coating, which adds corrosion resistance and minimizes light reflection.

    Internally, this replica features the Inferno Gen 2 HPA engine, this HPA engine works through a hybrid open bolt system, creating a pause in firing. This pause ensures that the stability of the BB increases and is fired more accurately. This hybrid system also retains the advantages of an open bolt system and adds, among other things, easy adjustment of the hop-up. The hop-up can be adjusted by means of a polymer wheel that can be reached from the outside of the replica.

    The pressure of the Wolverine Billet Gen 3 Tactical can be set between 80 and 140 PSI (5.5 to 9.6 bar), with which the muzzle energy can be set between 0.8 and 2 Joule. Using the Spartan Electronics, the rate of fire can be set from 15 to 35 BB's per second. The 120 rounds mid-cap magazine contains a special follower that enters the system after the last BB and causes the replica to stop firing, so you know immediately when to reload. The selector has, in addition to the safety, two positions that can be programmed in four variations using the Spartan Electronics:

    • • Semi - Semi
    • • Semi - 3 Round Burst
    • • Semi - Auto
    • • 3 Round Burst – Auto

    To provide a good grip for the shooter, this HPA airsoft replica includes a textured DLG Tactical polymer pistol grip. A separate bottom plate is included to partially seal the underside of the pistol grip, to prevent dirt from entering the system. In addition, this Wolverine MTW Billet Gen 3 Tactical 14” includes an adjustable 6-position polymer stock with a comfortable rubber shoulder pad and two QD sling mount attachments.

    Standard Features :

    • Gen 3 Billet Receiver Set
    • INFERNO Gen 2
    • Spartan Electronics MTW Control Board
    • Invictus MK-1 Rail
    • Empty Mag Detection
    • CNC Feed Tube
    • MTW Magazine
    • Op. Pressure Range: 80-140psi

    Tactical Version Additional Features :

    • 1045 Steel Flash Hider with a Black Oxide Finish
    • Premium Real Steel Grip
    • Heavy-duty Milspec Stock
    • PTS EPM-MTW magazine with empty mag detection

    84461.jpg?time=1663061643521

    The power of the replica depends on the operating pressure that you set on the regulator, it is appropriate for each player to have a speed control system in order to verify that the energy developed by the replica does not exceed the legal limits of your country.

    953,15 €
    Wolverine MTW Inferno Billet Series Tactical Gen3 -10 inch

    953,15 €

  • Wolverine MTW Inferno Billet Gen3 Series -10 inch

    The MTW platform is designed tobe more than just a new product, it’s designed to be a whole ecosystem in which the customer can exist and can use all of the products which we’ve developed over the past few years in seamless harmony. No more modifications, no more alignment issues, no more low quality AEG bodies. This platform truly takes pneumatic systems for airsoft to the next level as it unshackles them from the restrictions of being an aftermarket modification and instead designs the platform around all the incredible potential our HPA technology has to offer.

    Technical Highlights
    • True tool-less disassembly exactly like standard AR-15 platform
    • Empty mag detection and functional bolt catch when used with Wolverine Airsoft Magazines
    • Intrinsically aligned
    • Compatible with any standard AEG magazine
    • Custom designed rotary hop for ease of service and adjustment and optimal shooting performance
    • Compatible with many aftermarket AEG hop ups
    • Compatible with standard AEG hand guard, hop rubber and barrel
    • Bolt on compatibility with Wraith CO2 stock, Wraith AERO (tank) stock, and QUAKE recoil stock
    • Include Inferno GEN2 HPA engine
    • Compatible with real steal AR grips, stocks, takedown pins, trigger guard, buffer tubes, and more
    • Forged Lower Receiver new design
    • Extruded Slick Side Upper receiver
    • CNC Aluminum Barrel
    • Each system assembled and installed by a certified Wolverine Airsoft tech
    • Each gun is thoroughly tested, shot, and checked by Wolverine Airsoft tech before shipped

    Standard Features

    • Gen 3 Billet Receiver Set
    • INFERNO Gen 2
    • Spartan Electronics MTW Control Board
    • Invictus MK-1 Rail
    • Empty Mag Detection
    • CNC Feed Tube
    • MTW Magazine
    • Op. Pressure Range: 80-140psi
    New Features in the GEN3 MTW Billet
    • Changed the markings: now the bigger Wolverine Airsoft logo is on the left side and all text is on the right side of the lower receiver
    • There is now a dust-cover on the hop-up window, and a brass deflector beside it
    • There is a retainer screw on the upper rail to fix the charging handle
    • The feed tube is now CNC machined (for compatibility with existing pieces: this feed tube only fits inside the GEN3 uppers, and the GEN3 upper receiver only fits this new feed tube)

    Comes without tank, battery, regulator

    The power of the replica depends on the operating pressure that you set on the regulator, it is appropriate for each player to have a speed control system in order to verify that the energy developed by the replica does not exceed the legal limits of your country.

    850,65 €
    Wolverine MTW Inferno Billet Gen3 Series -10 inch

    850,65 €

  • Wolverine MTW Inferno Billet Series Tactical Gen3 - 14.5 inch

    The Wolverine MTW Billet Gen 3 Tactical is a sleek-looking and durable HPA airsoft replica that offers excellent performances thanks to the high-quality internals and exterior.

    The exterior of the replica is made of high-quality aluminium, which is finished with a black mil-spec coating. The Invictus MK-1 handguard features a Weaver/Picatinny mounting rail across the top and it contains multiple M-LOK slots all around. These M-LOK slots can be used for mounting a variety of accessories and also ensure that the total weight of the handguard is significantly lower than a handguard fully equipped with Weaver/Picatinny rails. To complement the look of the replica, a steel flash hider is included. This flash hider is finished with a black oxide coating, which adds corrosion resistance and minimizes light reflection.

    Internally, this replica features the Inferno Gen 2 HPA engine, this HPA engine works through a hybrid open bolt system, creating a pause in firing. This pause ensures that the stability of the BB increases and is fired more accurately. This hybrid system also retains the advantages of an open bolt system and adds, among other things, easy adjustment of the hop-up. The hop-up can be adjusted by means of a polymer wheel that can be reached from the outside of the replica.

    The pressure of the Wolverine Billet Gen 3 Tactical can be set between 80 and 140 PSI (5.5 to 9.6 bar), with which the muzzle energy can be set between 0.8 and 2 Joule. Using the Spartan Electronics, the rate of fire can be set from 15 to 35 BB's per second. The 120 rounds mid-cap magazine contains a special follower that enters the system after the last BB and causes the replica to stop firing, so you know immediately when to reload. The selector has, in addition to the safety, two positions that can be programmed in four variations using the Spartan Electronics:

    • • Semi - Semi
    • • Semi - 3 Round Burst
    • • Semi - Auto
    • • 3 Round Burst – Auto

    To provide a good grip for the shooter, this HPA airsoft replica includes a textured DLG Tactical polymer pistol grip. A separate bottom plate is included to partially seal the underside of the pistol grip, to prevent dirt from entering the system. In addition, this Wolverine MTW Billet Gen 3 Tactical 14” includes an adjustable 6-position polymer stock with a comfortable rubber shoulder pad and two QD sling mount attachments.

    Standard Features :

    • Gen 3 Billet Receiver Set
    • INFERNO Gen 2
    • Spartan Electronics MTW Control Board
    • Invictus MK-1 Rail
    • Empty Mag Detection
    • CNC Feed Tube
    • MTW Magazine
    • Op. Pressure Range: 80-140psi

    Tactical Version Additional Features :

    • 1045 Steel Flash Hider with a Black Oxide Finish
    • Premium Real Steel Grip
    • Heavy-duty Milspec Stock
    • PTS EPM-MTW magazine with empty mag detection

    84461.jpg?time=1663061643521

    The power of the replica depends on the operating pressure that you set on the regulator, it is appropriate for each player to have a speed control system in order to verify that the energy developed by the replica does not exceed the legal limits of your country.

    963,40 €
    Wolverine MTW Inferno Billet Series Tactical Gen3 - 14.5 inch

    963,40 €

  • Wolverine MTW Inferno Billet Series 7 inch

    The MTW platform is designed to be more than just a new product, it’s designed to be a whole ecosystem in which the customer can exist and can use all of the products which we’ve developed over the past few years in seamless harmony. No more modifications, no more alignment issues, no more low quality AEG bodies. This platform truly takes pneumatic systems for airsoft to the next level as it unshackles them from the restrictions of being an aftermarket modification and instead designs the platform around all the incredible potential our HPA technology has to offer.

    Technical Highlights :
    • True tool-less disassembly exactly like standard AR-15 platform
    • Empty mag detection and functional bolt catch when used with Wolverine Airsoft Magazines
    • Intrinsically aligned
    • Compatible with any standard AEG magazine
    • Custom designed rotary hop for ease of service and adjustment and optimal shooting performance
    • Compatible with many aftermarket AEG hop ups
    • Compatible with standard AEG hand guard, hop rubber and barrel
    • Bolt on compatibility with Wraith CO2 stock, Wraith AERO (tank) stock, and QUAKE recoil stock
    • Include Inferno GEN2 HPA engine
    • Compatible with real steal AR grips, stocks, takedown pins, trigger guard, buffer tubes, and more
    • Forged Lower Receiver new design
    • Extruded Slick Side Upper receiver
    • Invictus M-Lok rail with proprietary mounting system
    • CNC Aluminum Barrel
    • US connector
    • Each system assembled and installed by a certified Wolverine Airsoft tech
    • Each gun is thoroughly tested, shot, and checked by Wolverine Airsoft tech before shipped

    Comes without tank, battery, regulator

    The power of the replica depends on the operating pressure that you set on the regulator, it is appropriate for each player to have a speed control system in order to verify that the energy developed by the replica does not exceed the legal limits of your country.

    901,90 €
    Wolverine MTW Inferno Billet Series 7 inch

    901,90 €

  • Wolverine MTW Inferno Billet Series Tactical Gen3 - 7 inch

    The Wolverine MTW Billet Gen 3 Tactical is a sleek-looking and durable HPA airsoft replica that offers excellent performances thanks to the high-quality internals and exterior.

    The exterior of the replica is made of high-quality aluminium, which is finished with a black mil-spec coating. The Invictus MK-1 handguard features a Weaver/Picatinny mounting rail across the top and it contains multiple M-LOK slots all around. These M-LOK slots can be used for mounting a variety of accessories and also ensure that the total weight of the handguard is significantly lower than a handguard fully equipped with Weaver/Picatinny rails. To complement the look of the replica, a steel flash hider is included. This flash hider is finished with a black oxide coating, which adds corrosion resistance and minimizes light reflection.

    Internally, this replica features the Inferno Gen 2 HPA engine, this HPA engine works through a hybrid open bolt system, creating a pause in firing. This pause ensures that the stability of the BB increases and is fired more accurately. This hybrid system also retains the advantages of an open bolt system and adds, among other things, easy adjustment of the hop-up. The hop-up can be adjusted by means of a polymer wheel that can be reached from the outside of the replica.

    The pressure of the Wolverine Billet Gen 3 Tactical can be set between 80 and 140 PSI (5.5 to 9.6 bar), with which the muzzle energy can be set between 0.8 and 2 Joule. Using the Spartan Electronics, the rate of fire can be set from 15 to 35 BB's per second. The 120 rounds mid-cap magazine contains a special follower that enters the system after the last BB and causes the replica to stop firing, so you know immediately when to reload. The selector has, in addition to the safety, two positions that can be programmed in four variations using the Spartan Electronics:

    • • Semi - Semi
    • • Semi - 3 Round Burst
    • • Semi - Auto
    • • 3 Round Burst – Auto

    To provide a good grip for the shooter, this HPA airsoft replica includes a textured DLG Tactical polymer pistol grip. A separate bottom plate is included to partially seal the underside of the pistol grip, to prevent dirt from entering the system. In addition, this Wolverine MTW Billet Gen 3 Tactical 14” includes an adjustable 6-position polymer stock with a comfortable rubber shoulder pad and two QD sling mount attachments.

    Standard Features :

    • Gen 3 Billet Receiver Set
    • INFERNO Gen 2
    • Spartan Electronics MTW Control Board
    • Invictus MK-1 Rail
    • Empty Mag Detection
    • CNC Feed Tube
    • MTW Magazine
    • Op. Pressure Range: 80-140psi

    Tactical Version Additional Features :

    • 1045 Steel Flash Hider with a Black Oxide Finish
    • Premium Real Steel Grip
    • Heavy-duty Milspec Stock
    • PTS EPM-MTW magazine with empty mag detection

    84461.jpg?time=1663061643521

    The power of the replica depends on the operating pressure that you set on the regulator, it is appropriate for each player to have a speed control system in order to verify that the energy developed by the replica does not exceed the legal limits of your country.

    901,90 €
    Wolverine MTW Inferno Billet Series Tactical Gen3 - 7 inch

    901,90 €

Wolverine MTW come with US connector version on a line through the grip, you still have some possibilities to change with the following options :

  • -> EU connector version : Workshop will replace Wolverine US line connector by EU connector if you already have EU line, it will be very usefull :)
  • -> CO2 with Wraith X CO2 : For those who want to play with CO2 sparklet only, No more line, no need to carry a tank on a bag, regulator already included
  • -> HPA direct with Wraith X HPA :Play with a 13CI HPA tank as a stock. No more line, no need to carry a tank on a bag, regulator already included
  • -> HPA direct with Heretic Grip : HPA tank at the bottom of the grip like paintball guns. No more line, no need to carry a tank on a bag, regulator already included

Workshop package :

  • -> Wraith X HPA or CO2 require significant amount of time for preparation, installation and testing, 50€ (exclude VAT) Workshop installation fees will be added with
  • -> Heretic Grip require significant amount of time for preparation, installation and testing, 20€ (exclude VAT) Workshop installation fees will be added with
Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • BalystiK nipple with 6mm macroline (EU version)

    - 2 in 1 connector including a male nipple and a quickconnect for 6mm nylon hose.

    - Ideal for connecting the output of your HPA Wolverine or Polarstar.

    - EU version

    EU & US are different shape connectors and not compatible each other, please check here what is US & EU connectors :

    Compatible "EU" connectors :

    - All Balystik connectors "EU" with silver plated color are compatible

    - Balystik High flow lines "EU"with silver plated connector are compatible

    Compatible "US" connectors :

    - Redline, Valken, Wolverine and Ninja lines and other brand from USA.

    - Balystik High flow lines "US" with gold color connector are compatible

    - Balystik "US" connector with Gold color

    Check the Datasheet above to confirm the compatibility of the connector.

    7,07 €
    BalystiK nipple with 6mm macroline (EU version)

    7,07 €

  • Wolverine heretic labs tank grip for MTW / article I

    Take the weight off your shoulders with the Heretic Labs Tank Grip. Attach an HPA tank directly into your Heretic or MTW-Spec HPA replica and you’re ready to go. Powered by the lightning-fast Wolverine Airsoft Storm Category 5 Regulator, this grip is the ultimate upgrade to dominate the speedsoft arena.

     

    Features

    • Built-in STORM Category 5 Regulator with forward-facing gauge (60-180 PSI Range)
    • Storage space for battery and airline.
    • Convenient toolless battery access.
    • Rugged design with quality molded glass-filled nylon.
    • Accepts standard HPA tanks
    • Fits MTW-Spec HPA replicas
    • Integrated tournament lock
    • Spartan Electronics recommended
    • Weight: 0,87lbs (395 gr.)
    280,75 €
    Wolverine heretic labs tank grip for MTW / article I

    280,75 €

  • Wolverine WRAITH X CO2 Stock for MTW

    WRAITH X from Wolverine Airsoft is the new and improved version of the Wraith line-up ! No Line, No Compromise ! Untether the performance of your MTW without compromise with the WRAITH X. Everything is included in the box to run your choice of 12g CO2 or 33g CO2 inside the milspec buffer tube or a standard HPA tank. WRAITH X includes all the advantages of the STORM Category 5 regulator which provides faster and more consistent pressure even in the most demanding of applications, from high refresh rate and low pressure SMGs all the way to high pressure precision required for advanced snipers. Want HPA performance without a line but not sure which air source to choose? Don’t choose…get it all with the WRAITH X.


     

    Features :

    • Includes everything required to use 12g, 33g CO2 cartridges or standard HPA tanks.
    • Rapidly change 12g CO2 cartridges with 2-start  threaded cap featuring magnetic cartridge extractor.
    • Maximize your CO2 consistency with 2X larger expansion chamber.
    • Built-in STORM Category 5 regulator for uncompromised performance.

    Specs :

    • Pressure range: 60-180 psi
    • Milspec buffer tube
    • Output energy: 1.0 – 2.5J adjustable (build dependent)
    • Approx. 200 shots per 12g cartridge
    • Approx. 500 shots per 33g cartridge
    • Approx. 1,000 shots per 13/3000 cu HPA tank
    • Only compatible for MTW for this version

    Includes :

    • WRAITH STORM Cat 5 Regulator
    • Milspec Buffer Tube
    • CO2 Expansion Chamber
    • 12g cartridge holder and cap
    • Hardpoint Adapter
    • Mini Airline
    • Pistol Grip Base Plate
    • Allen Wrenches
    • O-Ring Kit
    • WRAITH X Patch
    399,65 €
    Wolverine WRAITH X CO2 Stock for MTW

    399,65 €

  • Wolverine Airsoft WRAITH X for MTW with Tank Stock

    No Line, No Compromise! The Wolverine Airsoft WRAITH X HPA Kit is the solution for competitive airsoft players looking for an efficient setup that enables HPA performance without a line. This kit includes everything you need to run a 13/3000 or other 2″ diameter HPA tank in your stock. It includes both the WRAITH X STORM Category 5 Regulator and WRAITH X Tank Stock. Note: Does not include parts required for CO2 use.

     Features

    • Built-in STORM Category 5 regulator for uncompromised performance.
    • Wraith X HPA Tank Stock
      • Fits standard 13/3000 CU HPA tank
      • Tank Rubber-lined clamp to tightly grip bottle
      • Injection molded plastic
      • Weighs just 6.15oz (174 grams)

     Specs

    • Pressure range: 60-180 psi
    • Output energy: 1.0 – 2.5J adjustable (build dependent)
    • Approx. 1,000 shots per 13/3000 cu HPA tank

     Includes

    • WRAITH STORM Cat 5 Regulator
    • WRAITH X HPA Tank Stock
    • Hardpoint Adapter and Mini Airline for MTW or airline with threaded connector for AEG
    • Pistol Grip Base Plate
    • Allen Wrenches
    • O-Ring Kit
    • 2″x 3″ WRAITH X Patch
    • HPA tank not included
    338,15 €
    Wolverine Airsoft WRAITH X for MTW with Tank Stock

    338,15 €

  • Balystik braided line for HPA replica - Black EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and an additional finishing touch for your replica, ideal for supplying your replica with air in a high-performance and leak-free way during your airsoft games !

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    17,32 €
    Balystik braided line for HPA replica - Black EU

    17,32 €

  • Balystik braided line for HPA replica - Deep coffee EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    17,32 €
    Balystik braided line for HPA replica - Deep coffee EU

    17,32 €

  • Balystik braided line for HPA replica - Grey EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    17,32 €
    Balystik braided line for HPA replica - Grey EU

    17,32 €

  • Balystik braided line for HPA replica - Tan EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    17,32 €
    Balystik braided line for HPA replica - Tan EU

    17,32 €

  • Balystik braided line for HPA replica - OD EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    17,32 €
    Balystik braided line for HPA replica - OD EU

    17,32 €

  • Balystik braided line for HPA replica - OD US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    17,32 €
    Balystik braided line for HPA replica - OD US

    17,32 €

  • Balystik braided line for HPA replica - Tan US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    17,32 €
    Balystik braided line for HPA replica - Tan US

    17,32 €

  • Balystik braided line for HPA replica - Black US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    17,32 €
    Balystik braided line for HPA replica - Black US

    17,32 €

  • Balystik braided line for HPA replica - Grey US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    17,32 €
    Balystik braided line for HPA replica - Grey US

    17,32 €

  • Balystik braided line for HPA replica - Deep coffee US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    17,32 €
    Balystik braided line for HPA replica - Deep coffee US

    17,32 €

This product will be installed on your MTW before shipping,12€ (exclude VAT) Workshop installation fees will be added with , all unmounted original parts are always supplied in the box with the replica.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Wolverine / Heretic Labs Dropstock for MTW / AEG M4

    The Heretic Labs Drop Stock Adapter is CNC aluminum constructed with an anodized finish that is lightweight, durable, and beautiful. An innovative swappable buffer tube base allows it to be used with either a traditional AEG body or any MTW spec platform including the Heretic Labs articles series and any Forged, billet, or 9mm MTW.

    114,08 €
    Wolverine / Heretic Labs Dropstock for MTW / AEG M4

    114,08 €

The MTWs are compatible with numerous accessories with RS dimensions, which notably allows the integration of high quality grips such as those from the Magpul brand. However, those GBBR / RS grips require internal modifications to be compatible, so their prices are increased by €14 excluding tax which corresponds to the workshop package for the modification and installation on the replica. This product will be installed on your MTW before shipping, all unmounted original parts are always supplied in the box with the replica.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • HERA ARMS brown leather grip handle H15GL for AR15 / M4 GBBR

    Made of fiber glass reinforced polymer to improve impact resistance and strength. The H15GL pistol grip provides an internal storage place, e.g. to store batteries and other equipment and a leather rope application for increased grip. In relation to the weight, it is one of the most stable pistol grips on the market. HERA HFGL Pistolgrip in our established H15G Design. To increase grip we added leather applications to the surface. As a natural material leather is breathable, delivers a soft touch surface and provides excellent wear resistance. Our H15GL comes with a pre-installed 3mm leather cord that can be, according to your needs, changed at any time versus a standard 3mm cord. To change the cord you can simply disengage a internal lock screw and replace the cord.

    49,92 €
    HERA ARMS brown leather grip handle H15GL for AR15 / M4 GBBR

    49,92 €

  • HERA ARMS Black leather grip handle H15GL for AR15 / M4 GBBR

    Made of fiber glass reinforced polymer to improve impact resistance and strength. The H15GL pistol grip provides an internal storage place, e.g. to store batteries and other equipment and a leather rope application for increased grip. In relation to the weight, it is one of the most stable pistol grips on the market. HERA HFGL Pistolgrip in our established H15G Design. To increase grip we added leather applications to the surface. As a natural material leather is breathable, delivers a soft touch surface and provides excellent wear resistance. Our H15GL comes with a pre-installed 3mm leather cord that can be, according to your needs, changed at any time versus a standard 3mm cord. To change the cord you can simply disengage a internal lock screw and replace the cord.

    49,92 €
    HERA ARMS Black leather grip handle H15GL for AR15 / M4 GBBR

    49,92 €

  • HOGUE Grip and Mil-Spec Collapsible Buttstock for AR15 / M4 GBBR - Slate Grey

    • Beavertail Finger Groove Grip made of Black OverMolded Rubber
    • Mil-Spec Collapsible Buttstock
    131,92 €
    HOGUE Grip and Mil-Spec Collapsible Buttstock for AR15 / M4 GBBR - Slate Grey

    131,92 €

  • HOGUE Grip and Mil-Spec Collapsible Buttstock for AR15 / M4 GBBR - Purple

    • Beavertail Finger Groove Grip made of Black OverMolded Rubber
    • Mil-Spec Collapsible Buttstock
    131,92 €
    HOGUE Grip and Mil-Spec Collapsible Buttstock for AR15 / M4 GBBR - Purple

    131,92 €

  • HOGUE Grip and Mil-Spec Collapsible Buttstock for AR15 / M4 GBBR - Dark Earth

    • Beavertail Finger Groove Grip made of Black OverMolded Rubber
    • Mil-Spec Collapsible Buttstock
    131,92 €
    HOGUE Grip and Mil-Spec Collapsible Buttstock for AR15 / M4 GBBR - Dark Earth

    131,92 €

  • HOGUE Grip and Mil-Spec Collapsible Buttstock for AR15 / M4 GBBR - OD

    • Beavertail Finger Groove Grip made of Black OverMolded Rubber
    • Mil-Spec Collapsible Buttstock
    131,92 €
    HOGUE Grip and Mil-Spec Collapsible Buttstock for AR15 / M4 GBBR - OD

    131,92 €

  • HOGUE Grip and Mil-Spec Collapsible Buttstock for AR15 / M4 GBBR - black

    • Beavertail Finger Groove Grip made of Black OverMolded Rubber
    • Mil-Spec Collapsible Buttstock
    117,57 €
    HOGUE Grip and Mil-Spec Collapsible Buttstock for AR15 / M4 GBBR - black

    117,57 €

  • HOGUE Grip and Mil-Spec Collapsible Buttstock for AR15 / M4 GBBR - Ghillie Green

    • Beavertail Finger Groove Grip made of Black OverMolded Rubber
    • Mil-Spec Collapsible Buttstock
    131,92 €
    HOGUE Grip and Mil-Spec Collapsible Buttstock for AR15 / M4 GBBR - Ghillie Green

    131,92 €

  • HOGUE Grip and Mil-Spec Collapsible Buttstock for AR15 / M4 GBBR - Red Lava

    • Beavertail Finger Groove Grip made of Black OverMolded Rubber
    • Mil-Spec Collapsible Buttstock
    131,92 €
    HOGUE Grip and Mil-Spec Collapsible Buttstock for AR15 / M4 GBBR - Red Lava

    131,92 €

  • Hogue AR-15/M-16 Rubber Grip with Finger Grooves - Black

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 Rubber Grip with Finger Grooves - Black

    61,19 €

  • Hogue AR-15/M-16 Rubber Grip with Finger Grooves - OD

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 Rubber Grip with Finger Grooves - OD

    61,19 €

  • Hogue AR-15/M-16 Rubber Grip with Finger Grooves - Grey

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 Rubber Grip with Finger Grooves - Grey

    61,19 €

  • Hogue AR-15/M-16 Rubber Grip with Finger Grooves - FDE

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 Rubber Grip with Finger Grooves - FDE

    61,19 €

  • Hogue AR-15/M-16 Rubber Grip with Finger Grooves - Purple

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 Rubber Grip with Finger Grooves - Purple

    61,19 €

  • Hogue AR-15/M-16 Rubber Grip with Finger Grooves - Aqua

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 Rubber Grip with Finger Grooves - Aqua

    61,19 €

  • Hogue AR-15/M-16 Rubber Grip with Finger Grooves - Red lava

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 Rubber Grip with Finger Grooves - Red lava

    61,19 €

  • Hogue AR-15/M-16 Rubber Grip with Finger Grooves - Ghillie Green

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 Rubber Grip with Finger Grooves - Ghillie Green

    61,19 €

  • Hogue AR-15/M-16 cargo Rubber Grip with Finger Grooves - Black

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Storage compartement (batteries not included)
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Beavertail™ cushions the hand on recoil and offers increased hand comfort higher on the frame
    •  Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    •  Virtually impervious to all oils and solvents associated with firearms
    68,37 €
    Hogue AR-15/M-16 cargo Rubber Grip with Finger Grooves - Black

    68,37 €

  • Hogue AR-15/M-16 cargo Rubber Grip with Finger Grooves - OD

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Storage compartement (batteries not included)
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Beavertail™ cushions the hand on recoil and offers increased hand comfort higher on the frame
    •  Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    •  Virtually impervious to all oils and solvents associated with firearms
    68,37 €
    Hogue AR-15/M-16 cargo Rubber Grip with Finger Grooves - OD

    68,37 €

  • Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - Black

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Beavertail™ cushions the hand on recoil and offers increased hand comfort higher on the frame
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - Black

    61,19 €

  • Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - Grey

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Beavertail™ cushions the hand on recoil and offers increased hand comfort higher on the frame
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - Grey

    61,19 €

  • Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - OD

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Beavertail™ cushions the hand on recoil and offers increased hand comfort higher on the frame
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - OD

    61,19 €

  • Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - FDE

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Beavertail™ cushions the hand on recoil and offers increased hand comfort higher on the frame
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - FDE

    61,19 €

  • Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - Purple

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Beavertail™ cushions the hand on recoil and offers increased hand comfort higher on the frame
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - Purple

    61,19 €

  • Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - Aqua

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Beavertail™ cushions the hand on recoil and offers increased hand comfort higher on the frame
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - Aqua

    61,19 €

  • Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - GHILIE GREEN

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Beavertail™ cushions the hand on recoil and offers increased hand comfort higher on the frame
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - GHILIE GREEN

    61,19 €

  • Hogue AR-15/M-16 OverMolded Rubber Beavertail Grip - Red Lava

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber without finger grooves
    • Texture: Cobblestone™
    • Weight: 2.6 oz
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Beavertail™ cushions the hand on recoil and offers increased hand comfort higher on the frame
    •  Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    •  Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 OverMolded Rubber Beavertail Grip - Red Lava

    61,19 €

  • Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - Red Lava

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber with finger grooves
    • Texture: Cobblestone™
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Beavertail™ cushions the hand on recoil and offers increased hand comfort higher on the frame
    • Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    • Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 beavertail Rubber Grip with Finger Grooves - Red Lava

    61,19 €

  • Hogue AR-15/M-16 OverMolded Rubber Beavertail Grip - FDE

    • Precision fit for AR-15 / M16 rifles
    • Material: OverMolded® rubber without finger grooves
    • Texture: Cobblestone™
    • Weight: 2.6 oz
    • Gentle palm swells fit comfortably in hand
    • Textured with Hogue's famous Cobblestone pattern for an efficient non-slip, non-irritating stippled grip
    • Beavertail™ cushions the hand on recoil and offers increased hand comfort higher on the frame
    •  Made from long-lasting, durable, thermoplastic elastomer that ages gracefully for years of service
    •  Virtually impervious to all oils and solvents associated with firearms
    61,19 €
    Hogue AR-15/M-16 OverMolded Rubber Beavertail Grip - FDE

    61,19 €

  • Hogue 15 Degree Vertical grip for AR15 - Black

    • Precision fit for AR-15 / M16 rifles
    • Material: Polymer
    • 15° angle provides positioned grip advantage in close quarters
    • Thumb dish enables smooth transition towards trigger
    • Textured with Hogue's famous Cobblestone pattern for increased comfort and grip
    46,84 €
    Hogue 15 Degree Vertical grip for AR15 - Black

    46,84 €

  • Hogue 15 Degree Vertical grip for AR15 - OD

    • Precision fit for AR-15 / M16 rifles
    • Material: Polymer
    • 15° angle provides positioned grip advantage in close quarters
    • Thumb dish enables smooth transition towards trigger
    • Textured with Hogue's famous Cobblestone pattern for increased comfort and grip
    46,84 €
    Hogue 15 Degree Vertical grip for AR15 - OD

    46,84 €

  • Hogue 15 Degree Vertical grip for AR15 - FDE

    • Precision fit for AR-15 / M16 rifles
    • Material: Polymer
    • 15° angle provides positioned grip advantage in close quarters
    • Thumb dish enables smooth transition towards trigger
    • Textured with Hogue's famous Cobblestone pattern for increased comfort and grip
    46,84 €
    Hogue 15 Degree Vertical grip for AR15 - FDE

    46,84 €

  • M4 GBB pistol grip BCMGUNFIGHTER ™ - Black

    The VFC BCM GUNFIGHTER grip for M4 GBBRS is a high-quality grip designed to improve grip angle and overall shooting. The texturing of the grip is aggressive and allows for a better hold without the use of gloves.

    46,84 €
    M4 GBB pistol grip BCMGUNFIGHTER ™ - Black

    46,84 €

  • Magpul MOE® Grip – AR15/M4 for GBBR- Grey

    The MOE Grip (Magpul Original Equipment) is ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. 

    • Replacement for AR15/M4 pistol-grip*
    • One-piece reinforced polymer construction
    • Beavertail backstrap for enhanced ergonomics
    • Positive anti-slip texture
    • Includes a basic grip cap, but accepts optional Storage Cores for customized gear storage
    • Made in U.S.A.
    • All mounting hardware included.

    Weight, w/hardware: 2.8 oz.
    Height, receiver to bottom: 4.0 in.
    Thickness, max: 1.2 in.
    25 Degree Grip Angle

    42,74 €
    Magpul MOE® Grip – AR15/M4 for GBBR- Grey

    42,74 €

  • Magpul MOE® Grip – AR15/M4 for GBBR- DE

    The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip. The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.

    • Replacement for AR15/M4 pistol-grip*
    • One-piece reinforced polymer construction
    • Beavertail backstrap for enhanced ergonomics
    • Positive anti-slip texture
    • Includes a basic grip cap, but accepts optional Storage Cores for customized gear storage

    Specs
    Specifications

    • Weight, w/hardware: 2.8 oz.
    • Height, receiver to bottom: 4.0 in.
    • Thickness, max: 1.2 in.
    • 25 Degree Grip Angle

    Made in U.S.A.

    42,74 €
    Magpul MOE® Grip – AR15/M4 for GBBR- DE

    42,74 €

  • Magpul MOE® Grip – AR15/M4 for GBBR- BK

    The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip. The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.

    • Replacement for AR15/M4 pistol-grip*
    • One-piece reinforced polymer construction
    • Beavertail backstrap for enhanced ergonomics
    • Positive anti-slip texture
    • Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

    Specs
    Specifications

    • Weight, w/hardware: 2.8 oz.
    • Height, receiver to bottom: 4.0 in.
    • Thickness, max: 1.2 in.
    • 25 Degree Grip Angle

    Made in U.S.A.

    42,74 €
    Magpul MOE® Grip – AR15/M4 for GBBR- BK

    42,74 €

  • Magpul MOE+® Grip – AR15/M4 for GBBR- Grey

    The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.
    With a similar shape to a 'medium' sized MIAD, this AR15/M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.

    • Replacement for AR15/M4 pistol-grip*
    • One-piece reinforced polymer construction with wrap-around rubber overmolding
    • Beavertail backstrap for enhanced ergonomics
    • Hard-polymer bottom edge to reduce equipment snags or grip damage
    • Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

    • Weight, w/hardware: 3.4 oz.
    • Height, receiver to bottom: 4.0 in.
    • Thickness, max: 1.2 in.
    • 25 Degree Grip Angle


    Made in U.S.A.

    47,87 €
    Magpul MOE+® Grip – AR15/M4 for GBBR- Grey

    47,87 €

  • Magpul MOE+® Grip – AR15/M4 for GBBR- DE

    The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.

    With a similar shape to a 'medium' sized MIAD, this AR15/M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.

    • Replacement for AR15/M4 pistol-grip*
    • One-piece reinforced polymer construction with wrap-around rubber overmolding
    • Beavertail backstrap for enhanced ergonomics
    • Hard-polymer bottom edge to reduce equipment snags or grip damage
    • Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

    Specs
    SPECIFICATIONS

    • MOE+ Grip
    • Weight, w/hardware: 3.4 oz.
    • Height, receiver to bottom: 4.0 in.
    • Thickness, max: 1.2 in.
    • 25 Degree Grip Angle


    Made in U.S.A.

    47,87 €
    Magpul MOE+® Grip – AR15/M4 for GBBR- DE

    47,87 €

  • Magpul MOE+® Grip – AR15/M4 for GBBR- Black

    The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.

    With a similar shape to a 'medium' sized MIAD, this AR15/M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.

    • Replacement for AR15/M4 pistol-grip*
    • One-piece reinforced polymer construction with wrap-around rubber overmolding
    • Beavertail backstrap for enhanced ergonomics
    • Hard-polymer bottom edge to reduce equipment snags or grip damage
    • Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

    Specs
    SPECIFICATIONS

    • Weight, w/hardware: 3.4 oz.
    • Height, receiver to bottom: 4.0 in.
    • Thickness, max: 1.2 in.
    • 25 Degree Grip Angle

    Made in U.S.A.

    47,87 €
    Magpul MOE+® Grip – AR15/M4 for GBBR- Black

    47,87 €

  • Magpul MOE-K2® Grip – AR15/M4 for GBBR- ODG

    Product Details

    Similar in concept to the MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4's that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2 brings modern styling and ergonomics to the AR platform. All mounting hardware and a basic grip cap included.

    Features

    • Replacement for AR15/M4 pistol-grip*
    • One-piece reinforced polymer construction
    • More vertical grip angle than standard A2 grips
    • Unique backstrap design for proper trigger finger placement
    • Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
    • Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

    Made in U.S.A.

    • MOE-K2® Grip – AR15/M4
    • MOE-K2® Grip – AR15/M4
    • MOE-K2® Grip – AR15/M4
    • MOE-K2® Grip – AR15/M4
    42,74 €
    Magpul MOE-K2® Grip – AR15/M4 for GBBR- ODG

    42,74 €

  • Magpul MOE-K2® Grip – AR15/M4 for GBBR- Black

    Similar in concept to the MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4's that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2 brings modern styling and ergonomics to the AR platform. All mounting hardware and a basic grip cap included.

    • Replacement for AR15/M4 pistol-grip*
    • One-piece reinforced polymer construction
    • More vertical grip angle than standard A2 grips
    • Unique backstrap design for proper trigger finger placement
    • Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
    • Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

    Made in U.S.A.

    42,74 €
    Magpul MOE-K2® Grip – AR15/M4 for GBBR- Black

    42,74 €

  • Magpul MOE-K® Grip – AR15/M4 for GBBR- ODG

    Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The thin profile and lack of backstrap 'beavertail' also makes it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included.
    Replacement for AR15/M4 pistol-grip*
    One-piece reinforced polymer construction

    • More vertical grip angle than standard A2 grips
    • Minimalist design provides for a compact and thin profile
    • Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
    • Weight, w/hardware: 2.4 oz.
    • Height, receiver to bottom: 3.8 in.
    • Thickness, max: 1.0 in.
    • 20 Degree Grip Angle


    Made in U.S.A.

    *NOTE: Will also fit most 7.62 NATO AR10/SR25 style of rifles.

    WARNING: Observe safe firearm handling practices at all times. Failure to do so may result in serious bodily injury or death. Magpul Industries shall not be responsible for injury, death, or property damage resulting from faulty installation, misuse, illegal use, or modification of this product.

    MAG438_Hero.jpg

    42,74 €
    Magpul MOE-K® Grip – AR15/M4 for GBBR- ODG

    42,74 €

  • Magpul MOE-K® Grip – AR15/M4 for GBBR- DE

    Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The thin profile and lack of backstrap 'beavertail' also makes it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included.

    • Replacement for AR15/M4 pistol-grip*
    • One-piece reinforced polymer construction
    • More vertical grip angle than standard A2 grips
    • Minimalist design provides for a compact and thin profile

    Specs
    Specifications

    • Weight, w/hardware: 2.4 oz.
    • Height, receiver to bottom: 3.8 in.
    • Thickness, max: 1.0 in.
    • 20 Degree Grip Angle

    *NOTE: Will also fit most 7.62 NATO AR10/SR25 style of rifles.

    WARNING: Observe safe firearm handling practices at all times. Failure to do so may result in serious bodily injury or death. Magpul Industries shall not be responsible for injury, death, or property damage resulting from faulty installation, misuse, illegal use, or modification of this product.

    Made in U.S.A.

    42,74 €
    Magpul MOE-K® Grip – AR15/M4 for GBBR- DE

    42,74 €

  • Magpul MOE-K® Grip – AR15/M4 for GBBR - Black

    Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The thin profile and lack of backstrap 'beavertail' also makes it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included.

    • Replacement for AR15/M4 pistol-grip*
    • One-piece reinforced polymer construction
    • More vertical grip angle than standard A2 grips
    • Minimalist design provides for a compact and thin profile
    • Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments

    Specs
    Specifications

    • MOE-K Grip
    • Weight, w/hardware: 2.4 oz.
    • Height, receiver to bottom: 3.8 in.
    • Thickness, max: 1.0 in.
    • 20 Degree Grip Angle


    *NOTE: Will also fit most 7.62 NATO AR10/SR25 style of rifles.

    Related Info
    WARNING: Observe safe firearm handling practices at all times. Failure to do so may result in serious bodily injury or death. Magpul Industries shall not be responsible for injury, death, or property damage resulting from faulty installation, misuse, illegal use, or modification of this product.

    Made in U.S.A.

    41,72 €
    Magpul MOE-K® Grip – AR15/M4 for GBBR - Black

    41,72 €

This product will be installed on your MTW before shipping, all unmounted original parts are always supplied in the box with the replica.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Maxx Model CNC Aluminum Enhanced Bolt Catch for MTW - Style B, Black

    17,32 €
    Maxx Model CNC Aluminum Enhanced Bolt Catch for MTW - Style B, Black

    17,32 €

  • Maxx Model CNC Aluminum Enhanced Bolt Catch for MTW - Style A, Black

    17,32 €
    Maxx Model CNC Aluminum Enhanced Bolt Catch for MTW - Style A, Black

    17,32 €

This product will be installed on your MTW before shipping. MTW trigger unit require time for installation, testing and adjustements. 12€ (exclude VAT) Workshop installation fees will be added with. All unmounted original parts are always supplied in the box with the replica.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Wolverine Heretic Labs Speed Trigger - black

    The Heretic labs speed trigger offers next lel feel and adjustability for any MTW-Spec platform. The innovative design includes full CNC aluminum construction on the trigger, with an integrated Delrin solid bearing design paired with a 50% lighter spring resulting in incredibly smooth action. In addition, the novel integral retaining clip allows easier installation while dramatically reducing friction. The result is a short, smooth pull with a crisp tactile fee. For advanced users we have included support for optional 3-way travel adjustment to allow tuning to true hair trigger travel.

    Features

    • Full CNC construction
    • Delrin solid bearing for smooth action
    • Three optional adjustment screws for pre-travel, post-travel and actuation
    • Compatible with the MTW-Spec platform

    120435.jpg?time=1712046314932

    54,63 €
    Wolverine Heretic Labs Speed Trigger - black

    54,63 €

  • Wolverine Heretic Labs Speed Trigger - Red

    The Heretic labs speed trigger offers next lel feel and adjustability for any MTW-Spec platform. The innovative design includes full CNC aluminum construction on the trigger, with an integrated Delrin solid bearing design paired with a 50% lighter spring resulting in incredibly smooth action. In addition, the novel integral retaining clip allows easier installation while dramatically reducing friction. The result is a short, smooth pull with a crisp tactile fee. For advanced users we have included support for optional 3-way travel adjustment to allow tuning to true hair trigger travel.

    Features

    • Full CNC construction
    • Delrin solid bearing for smooth action
    • Three optional adjustment screws for pre-travel, post-travel and actuation
    • Compatible with the MTW-Spec platform

    120435.jpg?time=1712046314932

    54,63 €
    Wolverine Heretic Labs Speed Trigger - Red

    54,63 €

  • Wolverine Heretic Labs Speed Trigger - Orange

    The Heretic labs speed trigger offers next lel feel and adjustability for any MTW-Spec platform. The innovative design includes full CNC aluminum construction on the trigger, with an integrated Delrin solid bearing design paired with a 50% lighter spring resulting in incredibly smooth action. In addition, the novel integral retaining clip allows easier installation while dramatically reducing friction. The result is a short, smooth pull with a crisp tactile fee. For advanced users we have included support for optional 3-way travel adjustment to allow tuning to true hair trigger travel.

    Features

    • Full CNC construction
    • Delrin solid bearing for smooth action
    • Three optional adjustment screws for pre-travel, post-travel and actuation
    • Compatible with the MTW-Spec platform

    120435.jpg?time=1712046314932

    54,63 €
    Wolverine Heretic Labs Speed Trigger - Orange

    54,63 €

  • Maxx Model CNC Advanced Speed Trigger Style B Black for MTW

    • Allow fine tuning of the trigger with the adjustable screws included
    • Fit Most HPA MTW Forged, Billet and MTW-9 series
    • Not compatible with Reaper Mechanical system
    • Use proper tools for disassembly and reassembly the trigger with great care due to spring tension
    • Bearing lubricant oil/grease is recommended for smooth operation
    50,53 €
    Maxx Model CNC Advanced Speed Trigger Style B Black for MTW

    50,53 €

  • Maxx Model CNC Advanced Speed Trigger Style B red for MTW

    • Allow fine tuning of the trigger with the adjustable screws included
    • Fit Most HPA MTW Forged, Billet and MTW-9 series
    • Not compatible with Reaper Mechanical system
    • Use proper tools for disassembly and reassembly the trigger with great care due to spring tension
    • Bearing lubricant oil/grease is recommended for smooth operation
    50,53 €
    Maxx Model CNC Advanced Speed Trigger Style B red for MTW

    50,53 €

  • Maxx Model CNC Advanced Speed Trigger Style B Gold for MTW

    • Allow fine tuning of the trigger with the adjustable screws included
    • Fit Most HPA MTW Forged, Billet and MTW-9 series
    • Not compatible with Reaper Mechanical system
    • Use proper tools for disassembly and reassembly the trigger with great care due to spring tension
    • Bearing lubricant oil/grease is recommended for smooth operation
    43,38 €

    Remises par quantités

    QuantityPrixÉconomie
    1 34,70 € au moins 8,68 €
    Maxx Model CNC Advanced Speed Trigger Style B Gold for MTW

    43,38 €

  • Maxx Model CNC Advanced Speed Trigger Style C Black for MTW

    • Allow fine tuning of the trigger with the adjustable screws included
    • Fit Most HPA MTW Forged, Billet and MTW-9 series
    • Not compatible with Reaper Mechanical system
    • Use proper tools for disassembly and reassembly the trigger with great care due to spring tension
    • Bearing lubricant oil/grease is recommended for smooth operation
    50,53 €
    Maxx Model CNC Advanced Speed Trigger Style C Black for MTW

    50,53 €

  • Maxx Model CNC Advanced Speed Trigger Style C red for MTW

    • Allow fine tuning of the trigger with the adjustable screws included
    • Fit Most HPA MTW Forged, Billet and MTW-9 series
    • Not compatible with Reaper Mechanical system
    • Use proper tools for disassembly and reassembly the trigger with great care due to spring tension
    • Bearing lubricant oil/grease is recommended for smooth operation
    50,53 €
    Maxx Model CNC Advanced Speed Trigger Style C red for MTW

    50,53 €

  • Maxx Model CNC Advanced Speed Trigger Style C Gold for MTW

    • Allow fine tuning of the trigger with the adjustable screws included
    • Fit Most HPA MTW Forged, Billet and MTW-9 series
    • Not compatible with Reaper Mechanical system
    • Use proper tools for disassembly and reassembly the trigger with great care due to spring tension
    • Bearing lubricant oil/grease is recommended for smooth operation
    50,53 €
    Maxx Model CNC Advanced Speed Trigger Style C Gold for MTW

    50,53 €

  • Maxx Model CNC Advanced Speed Trigger Style D Black for MTW

    • Allow fine tuning of the trigger with the adjustable screws included
    • Fit Most HPA MTW Forged, Billet and MTW-9 series
    • Not compatible with Reaper Mechanical system
    • Use proper tools for disassembly and reassembly the trigger with great care due to spring tension
    • Bearing lubricant oil/grease is recommended for smooth operation
    50,53 €
    Maxx Model CNC Advanced Speed Trigger Style D Black for MTW

    50,53 €

  • Maxx Model CNC Advanced Speed Trigger Style D red for MTW

    • Allow fine tuning of the trigger with the adjustable screws included
    • Fit Most HPA MTW Forged, Billet and MTW-9 series
    • Not compatible with Reaper Mechanical system
    • Use proper tools for disassembly and reassembly the trigger with great care due to spring tension
    • Bearing lubricant oil/grease is recommended for smooth operation
    50,53 €
    Maxx Model CNC Advanced Speed Trigger Style D red for MTW

    50,53 €

  • Maxx Model CNC Advanced Speed Trigger Style D Gold for MTW

    • Allow fine tuning of the trigger with the adjustable screws included
    • Fit Most HPA MTW Forged, Billet and MTW-9 series
    • Not compatible with Reaper Mechanical system
    • Use proper tools for disassembly and reassembly the trigger with great care due to spring tension
    • Bearing lubricant oil/grease is recommended for smooth operation
    50,53 €
    Maxx Model CNC Advanced Speed Trigger Style D Gold for MTW

    50,53 €

  • Maxx Model CNC Advanced Speed Trigger Style E Black for MTW

    • Allow fine tuning of the trigger with the adjustable screws included
    • Fit Most HPA MTW Forged, Billet and MTW-9 series
    • Not compatible with Reaper Mechanical system
    • Use proper tools for disassembly and reassembly the trigger with great care due to spring tension
    • Bearing lubricant oil/grease is recommended for smooth operation
    50,53 €
    Maxx Model CNC Advanced Speed Trigger Style E Black for MTW

    50,53 €

  • Maxx Model CNC Advanced Speed Trigger Style E red for MTW

    • Allow fine tuning of the trigger with the adjustable screws included
    • Fit Most HPA MTW Forged, Billet and MTW-9 series
    • Not compatible with Reaper Mechanical system
    • Use proper tools for disassembly and reassembly the trigger with great care due to spring tension
    • Bearing lubricant oil/grease is recommended for smooth operation
    50,53 €
    Maxx Model CNC Advanced Speed Trigger Style E red for MTW

    50,53 €

  • Maxx Model CNC Advanced Speed Trigger Style E Gold for MTW

    • Allow fine tuning of the trigger with the adjustable screws included
    • Fit Most HPA MTW Forged, Billet and MTW-9 series
    • Not compatible with Reaper Mechanical system
    • Use proper tools for disassembly and reassembly the trigger with great care due to spring tension
    • Bearing lubricant oil/grease is recommended for smooth operation
    43,38 €

    Remises par quantités

    QuantityPrixÉconomie
    1 34,70 € au moins 8,68 €
    Maxx Model CNC Advanced Speed Trigger Style E Gold for MTW

    43,38 €

MTW CNC hop-up unit require time for installation, testing and adjustements. 8€ (exclude VAT) Workshop installation fees will be added with. All unmounted original parts are always supplied in the box with the replica.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Maxx Model CNC hop up Chamber M4W for Wolverine MTW

    CNC Aluminum Hopup Chamber M4W unit is precisely machined to perform accurately and consistently on HPA MTW Milspec, Forged, Billet and MTW-9 series. The Hopup Chamber M4W unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot.

    The Hopup Chamber M4W unit is designed to accept the HPA MTW Engine M4 nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use. The Hopup Chamber M4W unit is wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are optional)

    Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.

     

     Specification
    product_right_arrow.pngOverall Length: 51.15mm
    product_right_arrow.pngOverall Height: 22mm
    product_right_arrow.pngInlet Adaptor Outer Diameter (to fit into HPA Nozzle Outlet): 11mm
    product_right_arrow.pngHub Outer Diameter (to fit into Outer Barrel): 12mm
    product_right_arrow.pngHub Inner Diameter (to fit Nozzle): 8mm
    product_right_arrow.pngMaterial: Aluminum 6061
     Features
    product_right_arrow.pngMachined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability
    product_right_arrow.pngPerformed accurately and consistently on HPA MTW Milspec, Forged, Billet and MTW-9 series
    product_right_arrow.pngPrecision Rotary Dial Knob for fine hopup adjustments
    product_right_arrow.pngRe-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot
    product_right_arrow.pngRemovable Steel Pivot Pin for ease of setup and maintenance
    product_right_arrow.pngAccepted the HPA MTW Engine M4 nozzle length
    product_right_arrow.pngFully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use
    product_right_arrow.pngWisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are sold separately)
    product_right_arrow.pngMounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots
    product_right_arrow.pngIncluded an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting
    product_right_arrow.pngEquipped with 2 compression springs on top and center to ensure the hopup unit is seated straight and air tight during use
    product_right_arrow.pngCompatible with any 11mm inner bore HPA Engine nozzle outlets
    product_right_arrow.pngThe Dual UV LED Tracer Module to glow BB in the dark ready!
     Usage
    product_right_arrow.pngCompatible with most HPA MTW Milspec, Forged, Billet and MTW-9 series
     Requires
    product_right_arrow.pngWearing eye protection is recommended
    product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
    product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation
     Instruction
    product_right_arrow.png
     Includes
    product_right_arrow.png1 x CNC Aluminum Hopup Chamber M4W unit
    product_right_arrow.png2 x CNC Acrylic Side Cover
    product_right_arrow.png2 x CNC Brass 2.6mm Side Wing
    product_right_arrow.png1 x CNC Steel Pivot Pin
    product_right_arrow.png1 x CNC Aluminum Hopup Lever
    product_right_arrow.png1 x CNC Aluminum Soft Round Nub
    product_right_arrow.png1 x CNC Aluminum Soft Flat Nub (4mm)
    product_right_arrow.png1 x CNC Aluminum Hard Concave Nub (4mm)
    product_right_arrow.png3 x Steel Nub Spring
    product_right_arrow.png1 x CNC Steel Spring Guide
    product_right_arrow.png1 x Steel Upper Compression Spring
    product_right_arrow.png1 x Steel Center Compression Spring
    product_right_arrow.png1 x CNC Delrin Locking C-Clip
    product_right_arrow.png1 x CNC Brass Barrel Spacer
    product_right_arrow.png1 x Brass Barrel Spacer Holder Oring
    product_right_arrow.png1 x CNC Aluminum Rotary Dial Knob
    product_right_arrow.png1 x CNC Aluminum Inlet Adaptor (OD11mm)

     Instruction Manuals are included

    90,71 €
    Maxx Model CNC hop up Chamber M4W for Wolverine MTW

    90,71 €

  • Maxx Model CNC hop up Chamber M4W for MTW (new version)

    CNC Aluminum Hop-up Chamber M4W unit is precisely machined to perform accurately and consistently on HPA MTW Milspec, Forged, Billet and MTW-9 series. The Hopup Chamber M4W unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and Bucking Nubs perform with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot. The Hop-up Chamber M4W unit is designed to accept the HPA MTW Engine M4 nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use. The Hop-up Chamber M4W unit is wisely equipped with an interchangeable Inlet Adaptor to ensure the hop-up unit is inserted exactly in the center of the inner bore HPA Engine nozzle outlet without wobbling. Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.

    Include :

    • 1 x CNC Aluminum Hop-up Chamber M4W (new version)
    • 2 x CNC Acrylic Side Cover
    • 2 x CNC Brass 2.6mm Side Wing
    • 1 x CNC Steel Pivot Pin
    • 1 x CNC Aluminum Hopup Lever
    • 1 x CNC Aluminum Soft Round Nub
    • 1 x CNC Aluminum Soft Flat Nub
    • 1 x CNC Aluminum Hard Concave Nub
    • 3 x Steel Nub Spring
    • 1 x CNC Steel Spring Guide
    • 1 x Steel Upper Compression Spring
    • 1 x Steel Center Compression Spring
    • 1 x CNC Delrin Locking C-Clip
    • 1 x CNC Brass Barrel Spacer
    • 1 x Brass Barrel Spacer Holder Oring
    • 1 x CNC Aluminum Rotary Dial Knob
    • 1 x CNC Aluminum Inlet Adaptor
    • 1 x Shim set
    • 1 x Oring set
    90,71 €
    Maxx Model CNC hop up Chamber M4W for MTW (new version)

    90,71 €

  • Maxx Model CNC hop up Chamber MXW for Wolverine MTW

    CNC Aluminum Hopup Chamber MXW unit is precisely machined to perform accurately and consistently on HPA MTW Milspec, Forged, Billet and MTW-9 series. The Hopup Chamber MXW unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot. The Hopup Chamber MXW unit is designed to accept the HPA MTW Engine M4 nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use. The Hopup Chamber MXW unit is wisely equipped with a self-centering inlet O-ring to ensure the hopup unit is inserted exactly in the center of the 11mm to 11.5mm inner bore HPA Engine nozzle outlet without wobbling. Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.

    ***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS!

     Includes
    product_right_arrow.png1 x CNC Aluminum Hopup Chamber MXW unit
    product_right_arrow.png2 x CNC Brass 2.6mm Side Wing
    product_right_arrow.png1 x CNC Steel Pivot Pin
    product_right_arrow.png1 x CNC Aluminum Hopup Lever
    product_right_arrow.png1 x CNC Aluminum Soft Flat Nub (4mm)
    product_right_arrow.png1 x Steel Nub Spring
    product_right_arrow.png1 x CNC Delrin Locking C-Clip
    product_right_arrow.png1 x CNC Brass Barrel Spacer
    product_right_arrow.png1 x Brass Barrel Spacer Holder Oring
    product_right_arrow.png1 x CNC Aluminum Rotary Dial Knob

     

     Specification
    product_right_arrow.pngOverall Length: 51.15mm
    product_right_arrow.pngOverall Height: 22mm
    product_right_arrow.pngInlet Diameter (to fit into HPA Nozzle Outlet): 11mm to 11.5mm
    product_right_arrow.pngHub Outer Diameter (to fit into Outer Barrel): 12mm
    product_right_arrow.pngHub Inner Diameter (to fit Nozzle): 7mm
    product_right_arrow.pngMaterial: Aluminum 6061

     

     Features
    product_right_arrow.pngMachined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability
    product_right_arrow.pngPerformed accurately and consistently on HPA MTW Milspec, Forged, Billet and MTW-9 series
    product_right_arrow.pngPrecision Rotary Dial Knob for fine hopup adjustments
    product_right_arrow.pngRe-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot
    product_right_arrow.pngRemovable Steel Pivot Pin for ease of setup and maintenance
    product_right_arrow.pngAccepted the HPA MTW Engine M4 nozzle length
    product_right_arrow.pngFully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use
    product_right_arrow.pngWisely equipped with a self-centering inlet O-ring to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore HPA Engine nozzle outlet without wobbling
    product_right_arrow.pngMounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots
    product_right_arrow.pngIncluded an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting
    product_right_arrow.pngCompatible with any 11mm to 11.5mm inner bore HPA Engine nozzle outlets

     Usage
    product_right_arrow.pngCompatible with most HPA MTW Milspec, Forged, Billet and MTW-9 series

     

     Requires
    product_right_arrow.pngWearing eye protection is recommended
    product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
    product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

     

     Instruction
    product_right_arrow.pngInstruction Manuals are included

    50,74 €
    Maxx Model CNC hop up Chamber MXW for Wolverine MTW

    50,74 €

  • Wolverine INVICTUS Phoenix Hop for MTW

    Wolverine Airsoft MTW Phoenix Hop - by Invictus

    The Phoenix Hop by our sister company, Invictus Manufacturing is our new CNC hop up for the MTW. Some features include:

    • Improved Feeding
    • Increased Durability and Wear
    • Superior Air Seal
    • Improved Groupings for a Variety of Setups
    • Superior Full Auto Performance

    Watch the videos below to learn more:

    90,71 €
    Wolverine INVICTUS Phoenix Hop for MTW

    90,71 €

Hop up Rubber require time for installation, testing and adjustements. 8€ (exclude VAT) Workshop installation fees will be added with. All unmounted original parts are always supplied in the box with the replica.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Maple Leaf Macaron Hop Up Rubber 50 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    18,96 €
    Maple Leaf Macaron Hop Up Rubber 50 Degree for AEG

    18,96 €

  • Maple Leaf Macaron Hop Up Rubber 60 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    18,96 €
    Maple Leaf Macaron Hop Up Rubber 60 Degree for AEG

    18,96 €

  • Maple Leaf MR Hop Up Rubber for AEG - 50 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 50 Degree (green)

    19,99 €
    Maple Leaf MR Hop Up Rubber for AEG - 50 Degree

    19,99 €

  • Maple Leaf MR Hop Up Rubber for AEG - 60 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 60 Degree (yellow)

    19,99 €
    Maple Leaf MR Hop Up Rubber for AEG - 60 Degree

    19,99 €

  • Maple Leaf MR Hop Up Rubber for AEG - 70 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 70 Degree (blue)

    19,99 €
    Maple Leaf MR Hop Up Rubber for AEG - 70 Degree

    19,99 €

  • Prometheus Air Seal Chamber Hop-Up Packing (Soft Type)

    If your hop-up adjustment is not having a big effect on the hop-up of your BBs, then it probably means that your hop-up packing is worn down and is not gripping the BB properly before it is fired out. A new hop-up packing will allow more accurate hop-up adjustments. Tested and approved by RedWolf. Best used on guns that shoot below 400fps.

    23,06 €
    Prometheus Air Seal Chamber Hop-Up Packing (Soft Type)

    23,06 €

  • 4UANTUM Rubber AEG hop-up Friction Pro-High Performance

    Designed to achieve ultimate consistency, the Friction Pro hop-up bucking focuses on creating a perfectly centered axis of spin in every shot. While based on a rather traditional single-point design, the unique contour of the contact patch generates enough friction to even lift heavy BBs up to 0.48 grams, while minimizing contact surface to ensure there’s no room for error. Resulting in a flat, consistent, and accurate trajectory! 

    23,06 €
    4UANTUM Rubber AEG hop-up Friction Pro-High Performance

    23,06 €

  • Modify Flat Hop Up Bucking baton RYUSOKU - Hard Type

    The Modify BATON RYUSOKU Flat Hop Up Bucking is designed for stabilizing the hop when using 0.25 BBs or more

    • Friendly use
    • Efficiently improves the accuracy.
    • Stabilize and extend the trajectory
    25,11 €
    Modify Flat Hop Up Bucking baton RYUSOKU - Hard Type

    25,11 €

  • Modify Flat Hop Up Bucking baton RYUSOKU - Soft Type

    The Modify BATON RYUSOKU Flat Hop Up Bucking is designed for stabilizing the hop when using 0.2 BBs

    • Friendly use
    • Efficiently improves the accuracy.
    • Stabilize and extend the trajectory
    24,09 €
    Modify Flat Hop Up Bucking baton RYUSOKU - Soft Type

    24,09 €

  • Maple Leaf Super Macaron Hop Up Rubber 50 Degree for AEG

    Maple Leaf Super Macaron is aspecial developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)

    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    19,99 €
    Maple Leaf Super Macaron Hop Up Rubber 50 Degree for AEG

    19,99 €

  • Maple Leaf Super Macaron Hop Up Rubber 60 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    19,99 €
    Maple Leaf Super Macaron Hop Up Rubber 60 Degree for AEG

    19,99 €

  • Maple Leaf Super Macaron Hop Up Rubber 70 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    19,99 €
    Maple Leaf Super Macaron Hop Up Rubber 70 Degree for AEG

    19,99 €

Precision Barrel require time for installation, testing and adjustements. 8€ (exclude VAT) Workshop installation fees will be added with. All unmounted original parts are always supplied in the box with the replica.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • PDI 6.01 Precision Inner Barrel for AEG 275mm

    Airsoft may be just a game, but the engineers and machinists at PDI definitely don't play around. These barrels are cold-hammer forged, which is the same process that real firearm barrels undergo. This process creates a very consistent bore that gives the barrel a tolerance of +0.002mm. This tolerance is currently the highest quality in the entire Airsoft industry for accessible stainless steel barrels. Custom made or lapped stainless barrels can surpass the inner surface of PDI, but those barrels are extremely expensive and are generally not accessible to most consumers. The material is SUS304 Stainless Steel. This Steel is harder to cut than most barrels and has superior corrosion resistance. Additionally, PDI barrels are very well known for their straightness and quality control. This barrel is 6.01mm best suited for high FPS.

    • Material: Cold Hammer Forged SUS304 Stainless Steel
    • 6.01mm (+0.002mm tolerance)
    • Made in Japan

    83,54 €
    PDI 6.01 Precision Inner Barrel for AEG 275mm

    83,54 €

  • PDI 6.08 Precision Inner Barrel for AEG 270mm

    Airsoft may be just a game, but the engineers and machinists at PDI definitely don't play around. These barrels are cold-hammer forged, which is the same process that real firearm barrels undergo. This process creates a very consistent bore that gives the barrel a tolerance of +0.002mm. This tolerance is currently the highest quality in the entire Airsoft industry for accessible stainless steel barrels. Custom made or lapped stainless barrels can surpass the inner surface of PDI, but those barrels are extremely expensive and are generally not accessible to most consumers. The material is SUS304 Stainless Steel. This Steel is harder to cut than most barrels and has superior corrosion resistance. Additionally, PDI barrels are very well known for their straightness and quality control. This barrel is 6.08, which is the same diameter as standard AEG barrels. The 6.08 bore is best suited for long range engagements. Through their own research and testing, PDI has found that wider bores give better accuracy over longer distances than tighter bores.

    - Material: Cold Hammer Forged SUS304 Stainless Steel
    - 6.08mm (+0.002mm tolerance)
    - Made in Japan

    68,16 €
    PDI 6.08 Precision Inner Barrel for AEG 270mm

    68,16 €

  • PDI 6.10 Wide Bore Inner Barrel for AEG 275mm

    PDI 6.10mm High Precision Wide Bore Inner Barrel for AEG with a margin of 0.007mm per barrel. Wide bore barrels are known for pushing distance rather than power. Perfect for reaching targets without worrying about them reaching you. Material : carbon steel STKM-12C-EC

    45,61 €
    PDI 6.10 Wide Bore Inner Barrel for AEG 275mm

    45,61 €

  • Poseidon 6.05 precision barrel Air Cushion Electroless Gen2 x 275mm

    Poseidon precision barrels are made of brass with hard electrolytic nickel surface coating. They feature the Air Cushion system technology with two notches on both sides of the barrel allowing the BBs to be guided without friction for a more efficient trajectory.

    • 1 x 6.05mm precision barrel
    • 1 x rubber
    • 1 x poseidon patch
    60,99 €
    Poseidon 6.05 precision barrel Air Cushion Electroless Gen2 x 275mm

    60,99 €

  • PDI 6.08 Precision Inner Barrel for AEG 275mm

    Airsoft may be just a game, but the engineers and machinists at PDI definitely don't play around. These barrels are cold-hammer forged, which is the same process that real firearm barrels undergo. This process creates a very consistent bore that gives the barrel a tolerance of +0.002mm. This tolerance is currently the highest quality in the entire Airsoft industry for accessible stainless steel barrels. Custom made or lapped stainless barrels can surpass the inner surface of PDI, but those barrels are extremely expensive and are generally not accessible to most consumers. The material is SUS304 Stainless Steel. This Steel is harder to cut than most barrels and has superior corrosion resistance. Additionally, PDI barrels are very well known for their straightness and quality control. This barrel is 6.08, which is the same diameter as standard AEG barrels. The 6.08 bore is best suited for long range engagements. Through their own research and testing, PDI has found that wider bores give better accuracy over longer distances than tighter bores.

    - Material: Cold Hammer Forged SUS304 Stainless Steel
    - 6.08mm (+0.002mm tolerance)
    - Made in Japan

    71,24 €
    PDI 6.08 Precision Inner Barrel for AEG 275mm

    71,24 €

  • PDI 6.05 Precision Inner Barrel for AEG 275mm

    Airsoft may be just a game, but the engineers and machinists at PDI definitely don't play around.

    These barrels are cold-hammer forged, which is the same process that real firearm barrels undergo. This process creates a very consistent bore that gives the barrel a tolerance of +0.002mm. This tolerance is currently the highest quality in the entire Airsoft industry for accessible stainless steel barrels. Custom made or lapped stainless barrels can surpass the inner surface of PDI, but those barrels are extremely expensive and are generally not accessible to most consumers.

    The material is SUS304 Stainless Steel. This Steel is harder to cut than most barrels and has superior corrosion resistance. Additionally, PDI barrels are very well known for their straightness and quality control.

    This barrel is 6.05, which is the same diameter as standard AEG barrels. The 6.05 bore is best suited for long range engagements. Through their own research and testing, PDI has found that wider bores give better accuracy over longer distances than tighter bores.

    - Material: Cold Hammer Forged SUS304 Stainless Steel
    - 6.05mm (+0.002mm tolerance)
    - Made in Japan

    71,24 €
    PDI 6.05 Precision Inner Barrel for AEG 275mm

    71,24 €

  • ORGA LEX05 BARREL for AEG (275mm)

    Extreme precision Inner Diameter 6.05mm (±‐0) LEX inner Barrel for AEG

    if use this barrel case you can get more BB power and flat setting on your Hop System. Mostly used for upgrading AEG’s, longer range and better precision result.

    If you use "Flat HOP SYSTEM" we recommend NAMAZU HOP (Firefly) or DIMENSION (ORGA).

    65,09 €
    ORGA LEX05 BARREL for AEG (275mm)

    65,09 €

  • Prometheus EG 6.03mm precision Barrel 280mm ( New gen)

    High grade precision barrel from Prometheus at 6.03mm diameter for extra power and precision shooting.

    With a precision barrel, you can opt for higher grade precision BB's for greater accuracy.

    Special lenght 280mm is ideal for KRYTAC CRB & LMG AEG

    76,36 €
    Prometheus EG 6.03mm precision Barrel 280mm ( New gen)

    76,36 €

Precision Barrel require time for installation, testing and adjustements. 8€ (exclude VAT) Workshop installation fees will be added with. All unmounted original parts are always supplied in the box with the replica.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • PDI 6.01 Precision Inner Barrel for AEG 390mm

    Airsoft may be just a game, but the engineers and machinists at PDI definitely don't play around. These barrels are cold-hammer forged, which is the same process that real firearm barrels undergo. This process creates a very consistent bore that gives the barrel a tolerance of +0.002mm. This tolerance is currently the highest quality in the entire Airsoft industry for accessible stainless steel barrels. Custom made or lapped stainless barrels can surpass the inner surface of PDI, but those barrels are extremely expensive and are generally not accessible to most consumers. The material is SUS304 Stainless Steel. This Steel is harder to cut than most barrels and has superior corrosion resistance. Additionally, PDI barrels are very well known for their straightness and quality control. This barrel is 6.01mm best suited for high FPS.

    • Material: Cold Hammer Forged SUS304 Stainless Steel
    • 6.01mm (+0.002mm tolerance)
    • Made in Japan

    112,24 €
    PDI 6.01 Precision Inner Barrel for AEG 390mm

    112,24 €

  • PDI 6.05 Precision Inner Barrel for AEG 390mm

    Airsoft may be just a game, but the engineers and machinists at PDI definitely don't play around.

    These barrels are cold-hammer forged, which is the same process that real firearm barrels undergo. This process creates a very consistent bore that gives the barrel a tolerance of +0.002mm. This tolerance is currently the highest quality in the entire Airsoft industry for accessible stainless steel barrels. Custom made or lapped stainless barrels can surpass the inner surface of PDI, but those barrels are extremely expensive and are generally not accessible to most consumers.

    The material is SUS304 Stainless Steel. This Steel is harder to cut than most barrels and has superior corrosion resistance. Additionally, PDI barrels are very well known for their straightness and quality control.

    This barrel is 6.05, which is the same diameter as standard AEG barrels. The 6.05 bore is best suited for long range engagements. Through their own research and testing, PDI has found that wider bores give better accuracy over longer distances than tighter bores.

    - Material: Cold Hammer Forged SUS304 Stainless Steel
    - 6.05mm (+0.002mm tolerance)
    - Made in Japan

    91,74 €
    PDI 6.05 Precision Inner Barrel for AEG 390mm

    91,74 €

  • Prometheus EG 6.03mm precision Barrel 387.5mm ( New gen)

    High grade precision barrel from Prometheus at 6.03mm diameter for extra power and precision shooting.

    With a precision barrel, you can opt for higher grade precision BB's for greater accuracy.

    91,74 €
    Prometheus EG 6.03mm precision Barrel 387.5mm ( New gen)

    91,74 €

Precision Barrel require time for installation, testing and adjustements. 8€ (exclude VAT) Workshop installation fees will be added with. All unmounted original parts are always supplied in the box with the replica.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • PDI 6.01 Precision Inner Barrel for AEG 215mm

    Airsoft may be just a game, but the engineers and machinists at PDI definitely don't play around. These barrels are cold-hammer forged, which is the same process that real firearm barrels undergo. This process creates a very consistent bore that gives the barrel a tolerance of +0.002mm. This tolerance is currently the highest quality in the entire Airsoft industry for accessible stainless steel barrels. Custom made or lapped stainless barrels can surpass the inner surface of PDI, but those barrels are extremely expensive and are generally not accessible to most consumers. The material is SUS304 Stainless Steel. This Steel is harder to cut than most barrels and has superior corrosion resistance. Additionally, PDI barrels are very well known for their straightness and quality control. This barrel is 6.01mm best suited for high FPS.

    • Material: Cold Hammer Forged SUS304 Stainless Steel
    • 6.01mm (+0.002mm tolerance)
    • Made in Japan

    64,06 €
    PDI 6.01 Precision Inner Barrel for AEG 215mm

    64,06 €

  • PDI 6.05 Precision Inner Barrel for AEG 215mm

    Airsoft may be just a game, but the engineers and machinists at PDI definitely don't play around. These barrels are cold-hammer forged, which is the same process that real firearm barrels undergo. This process creates a very consistent bore that gives the barrel a tolerance of +0.002mm. This tolerance is currently the highest quality in the entire Airsoft industry for accessible stainless steel barrels. Custom made or lapped stainless barrels can surpass the inner surface of PDI, but those barrels are extremely expensive and are generally not accessible to most consumers. The material is SUS304 Stainless Steel. This Steel is harder to cut than most barrels and has superior corrosion resistance. Additionally, PDI barrels are very well known for their straightness and quality control.

    This barrel is 6.05, which is the same diameter as standard AEG barrels. The 6.05 bore is best suited for long range engagements. Through their own research and testing, PDI has found that wider bores give better accuracy over longer distances than tighter bores.

    • Material: Cold Hammer Forged SUS304 Stainless Steel
    • 6.05mm (+0.002mm tolerance)
    • Made in Japan

    64,06 €
    PDI 6.05 Precision Inner Barrel for AEG 215mm

    64,06 €

  • Prometheus EG 6.03mm precision Barrel 205mm ( old gen)

    High grade precision barrel from Prometheus at 6.03mm diameter for extra power and precision shooting.

    With a precision barrel, you can opt for higher grade precision BB's for greater accuracy.

    71,24 €
    Prometheus EG 6.03mm precision Barrel 205mm ( old gen)

    71,24 €

  • PDI 6.03 Precision Inner Barrel for AEG 208mm

    The 03 barrel has a tight inner diameter and is a model that emphasizes on FPS. It is a precision stainless steel barrel made by cold forging. Since the inner diameter is slightly wider than the 01 barrel, it is less likely to get jammed with sand, dust and wax compared to 01, and it requires less maintenance. However, do be sure to perform regular maintenance just in case.

    • Outer Diameter：8.55mm
    • Inner Diameter：6.03mm
    • Tolerance：±0.002mm
    • Material：SUS304

    60,99 €
    PDI 6.03 Precision Inner Barrel for AEG 208mm

    60,99 €

  • Lambda 01 precision Barrel 6.01 for AEG 208mm

    Precision barrel in SUS304 stainless steel compatible with AEG and M14 replicas. These guns are directly manufactured in the Osaka factory in Japan and are of very high quality. All LAMBDA guns are designed on CNC machines.

    • The FIVE and ONE from Lambda is the most precise range in terms of finish with its 1 micron tolerance.
    • The FIVE and ONE from Lambda is similar to the high-end PDI INOX
    • The internal diameter is 6.01mm
    • The external diameter is 8.55mm

    canon-de-precision-lambda-five-pour-aeg-

    56,89 €
    Lambda 01 precision Barrel 6.01 for AEG 208mm

    56,89 €

  • PDI 6.08 Precision Inner Barrel for AEG 208mm

    Airsoft may be just a game, but the engineers and machinists at PDI definitely don't play around. These barrels are cold-hammer forged, which is the same process that real firearm barrels undergo. This process creates a very consistent bore that gives the barrel a tolerance of +0.002mm. This tolerance is currently the highest quality in the entire Airsoft industry for accessible stainless steel barrels. Custom made or lapped stainless barrels can surpass the inner surface of PDI, but those barrels are extremely expensive and are generally not accessible to most consumers. The material is SUS304 Stainless Steel. This Steel is harder to cut than most barrels and has superior corrosion resistance. Additionally, PDI barrels are very well known for their straightness and quality control. This barrel is 6.08, which is the same diameter as standard AEG barrels. The 6.08 bore is best suited for long range engagements. Through their own research and testing, PDI has found that wider bores give better accuracy over longer distances than tighter bores.

    - Material: Cold Hammer Forged SUS304 Stainless Steel
    - 6.08mm (+0.002mm tolerance)
    - Made in Japan

    60,99 €
    PDI 6.08 Precision Inner Barrel for AEG 208mm

    60,99 €

Save 15% on HPA batteries by adding them with your custom replica !

Qiantité totale 0

Vous pouvez ajouter un maximum de 100 quantités

  • ASG 7.4V 250mah 20C lipo battery for HPA

    This LI-PO battery is made for HPA powered Airsoft guns. Designed to be as small and compact as possible. It can easily be built in to pistol grips or stocks, where it powers the HPA FCU. Comes with with a JST Discharge plug. 
    6,88 €
    ASG 7.4V 250mah 20C lipo battery for HPA

    8,10 € 6,88 €

  • TITAN POWER 7.4V 350mah Li-ion Battery

    Under Discharge, Over Charge, and Short Protection
    Titan Power HPA batteries are protected from active-drawing HPA systems such as Polarstar and Wolverine, and will never allow itself to die like lipos, charge too much, or short circuit.

    No Puff
    Titan Power batteries will never puff and become unsafe like lipos will that have been either neglected or simply aged over time.

    No Memory
    Titan Power batteries can be charged from empty or nearly full without damaging the battery. Even if your battery gets low and your device cannot cycle, the battery is still within is safe operating range and can be charged safely back to 100%.

    No Fade / Lasts Forever
    Titan Power batteries can hold a charge for months and still be ready to use on game day. An extreme example is a pack used for testing, charged in 2012, which still holds 88% of its life in 2018. These packs can also be charged over 300 times and still store 80% of its original capacity.

    Warrantied
    Product claims sound too good to be true? Titan Power backs their US Arkansas based products with a 1 year warranty as long as the battery pack has not been modified.

    17,34 €
    TITAN POWER 7.4V 350mah Li-ion Battery

    20,40 € 17,34 €

  • VB Power 7.4v 300mah lipo battery for HPA

    Suitable for Wolverine & Polarstar FCUs

    7,75 €
    VB Power 7.4v 300mah lipo battery for HPA

    9,12 € 7,75 €

Remises par quantités

Save 15% on HPA tank !

Qiantité totale 0

Vous pouvez ajouter un maximum de 20 quantités

  • Balystik 0.2L 3000psi Alu HPA Tank with HP preset

    Balystik strikes again in the HPA universe and present a new range of high pressure cylinders. This tank is made of aluminum with steel base and will provide all the rigor expected of a reliable, efficient and safe product. The volume of this cylinder is 0,2 liters (13 ci) in with a maximum pressure of 3000psi (200 bar).


    Technical details :

    •      Tank and regulator with Pi certification
    •      Operating pressure: 200 BAR / 3000 PSI max
    •      Output pressure: 800 PSI
    •      5000 PSI mini pressure gauge
    •      Filling valve with filter and Protective cap
    •      Protective cap for ASA threaded outlet

    43,48 €
    Balystik 0.2L 3000psi Alu HPA Tank with HP preset

    51,15 € 43,48 €

  • Balystik 0.8L 3000psi Alu HPA Tank with HP preset

    Balystik strikes again in the HPA universe and present a new range of high pressure cylinders. This tank is made of aluminum with steel base and will provide all the rigor expected of a reliable, efficient and safe product. The volume of this cylinder is 0,8 liters (48 ci) in with a maximum pressure of 3000psi (200 bar).

    Technical details :

    •      Tank and regulator with Pi certification
    •      Operating pressure: 200 BAR / 3000 PSI max
    •      Output pressure: 800 PSI
    •      5000 PSI mini pressure gauge
    •      Filling valve with filter and Protective cap
    •      Protective cap for ASA threaded outlet

    47,83 €
    Balystik 0.8L 3000psi Alu HPA Tank with HP preset

    56,27 € 47,83 €

Remises par quantités

arrow_drop_downRécapitulatif :

Total :

Partagez votre création avec vos amis.

More info

* * * * * *

Our Workshop offer a wide range of modifications and extra parts on your Wolverine MTW Billet series before shipping : trigger, air entry, hop-up, etc ....

  • All selected parts will be mounted and tested before shipping
  • All replaced original parts will be added in the package
  • Workshop handling fees package are added on some parts following the time to mount & tests (detailled in each options)
  • If you don't select any options the MTW will be shipped without any modifications

Any questions or suggestions, don't hesitate to contact us before ordering!

* * * * * *

The MTW platform is designed to be more than just a new product, it’s designed to be a whole ecosystem in which the customer can exist and can use all of the products which we’ve developed over the past few years in seamless harmony. No more modifications, no more alignment issues, no more low quality AEG bodies. This platform truly takes pneumatic systems for airsoft to the next level as it unshackles them from the restrictions of being an aftermarket modification and instead designs the platform around all the incredible potential our HPA technology has to offer.

Technical Highlights :

  • True tool-less disassembly exactly like standard AR-15 platform
  • Empty mag detection and functional bolt catch when used with Wolverine Airsoft Magazines
  • Intrinsically aligned
  • Compatible with any standard AEG magazine
  • Custom designed rotary hop for ease of service and adjustment and optimal shooting performance
  • Compatible with many aftermarket AEG hop ups
  • Compatible with standard AEG hand guard, hop rubber and barrel
  • Bolt on compatibility with Wraith CO2 stock, Wraith AERO (tank) stock, and QUAKE recoil stock
  • Include Inferno GEN2 HPA engine
  • Compatible with real steal AR grips, stocks, takedown pins, trigger guard, buffer tubes, and more
  • Forged Lower Receiver new design
  • Extruded Slick Side Upper receiver
  • Invictus M-Lok rail with proprietary mounting system
  • CNC Aluminum Barrel
  • US connector
  • Each system assembled and installed by a certified Wolverine Airsoft tech
  • Each gun is thoroughly tested, shot, and checked by Wolverine Airsoft tech before shipped


Comes without tank, battery, regulator. The power of the replica depends on the operating pressure that you set on the regulator, it is appropriate for each player to have a speed control system in order to verify that the energy developed by the replica does not exceed the legal limits of your country.

Data sheet

TypeM4
Caliber6mm Airsoft
HPA SystemWolverine Inferno
Lenght (mm)660mm
Weight2400gr
MaterialMetal
Main colorBlack
Thread type14mm CCW
Hop-upAdjustable
Firing modeSemi + Full automatic
Attachment SystemM-LOK
Power sourceHPA
Magazine VersionMid-cap Spring operated
Magazine capacity120
Battery ConnectorJST
Power (FPS @ 0.20gr)Selectable
HPA Fitting typeUS

Customization

After saving your customized product, remember to add it to your cart.

loader

* required fields

Accessories

Airsoft gun Law

This airsoft replica is subject to the french Decree No. 99-240 of March 24, 1999, which regulates the law of replica firearms developing an output energy from the muzzle greater than 0.08 joule and equal to or less than 2 joules. This product is intended for recreational use only. By adding this product to your cart, you acknowledge:

  • Being older than 18
  • Master the basic safety rules concerning the use of this type of replica (wearing protective glasses, playing in a suitable and private place, etc.).
  • Never expose the replica in a public place because it can be mistaken for a real weapon with all the disastrous consequences that this implies
  • Being in full knowledge of the airsoft laws in your local country and buying knowingly, Powair6 cannot be responsible in the case of illegal importation.
  • Never point or shoot at a person, animal or any other object representing any danger.
  • Do not aim with your replica until you are ready to shoot at the target you have selected.
  • Do not shoot on a hard surface, risk of the ball bouncing, or in water, which could cause dangerous ricochets.
  • Do not aim the shot at the eyes or ears.
  • Do not use airsoft without wearing goggles or a protective mask.
  • Do not attempt to modify or disassemble the product in order to increase its firing power. It can be dangerous and will void the warranty.
  • Always be sure to keep the safety “ON” when you are no longer using the product.
  • Never look into the barrel, a BB may be hurt your eyes.

P6 Customs

P6 Customs

See all products from P6 Customs

Questions 

Pas de question client pour le moment.

Seuls les utilisateurs enregistrés peuvent poser une question. Login

Avis (1)

Seuls les clients enregistrés peuvent poster un avis. Connectez-vous ou créez un compte .
Tri:
5/5
Perfect. Fast shiping
Cet avis a été posté pour Wolverine MTW Inferno Billet series workshop custom
Voir plus d'avis