> >>HPA M4 Magazine kit for GLOCK / AAP01 series GBB
HPA M4 Magazine kit for GLOCK / AAP01 series GBB - View larger

HPA M4 Magazine kit for GLOCK / AAP01 series GBB

P6-HPA-M4GLOCK

New product

In stock

Moyenne des votes pour ce produit
5.0 / 5
Moyenne : 5.0 / 5
Basée sur 1 avis clients.

Configure

Si vous souhaitez enregistrer votre configuration, vous devez d'abord vous connecter.

Connexion

Customize your product

Choose your gas magazine, it is very important to choose the same brand AND compatible model as your replica.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • AAC 22rds gas Magazine for AAP-01 Assassin GBB

    Stay fully loaded with these spare magazine for AAP01 Assassin

    AAC 22rds gas Magazine for AAP-01 Assassin GBB

  • TTI 26rds Aluminum Lightweight magazine for G-series / AAP01

    140g only !

    This TTI AIRSOFT magazine is compatible with Tokyo Marui, WE, Glock series GBB airsoft and AAP-01 series. Featuring a capacity of 26 rounds and weighing only 140g, it's a lightweight and efficient option for your airsoft needs.

    TTI 26rds Aluminum Lightweight magazine for G-series / AAP01

  • WE 24 rds gaz Magazine for G17 / G18

    WE 24 rds gaz Magazine for G17 / G18

  • WE 19rds gas Magazine for G19 / G23F

    WE 19rds gas Magazine for G19 / G23F

Be careful to select the same connector version as your own HPA line (US or EU). 60D adapters are not compatible with hi-cap AEG magazine due to the angle, it may disarm the spring easily.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Creeper Concepts HPA M4 mag adapter for Glock / AAP Gen 3 - US

    New generation, Gen 3!

    New generation of the Creeper concepts adapter has arrived!

    This is an adapter printed using Selective Laser Sintering (SLS) technology, which allows you to connect an m4 magazine to your glock pistol or the action army AAP-01

    Regulator and m4 magazine are not included. 

    Some custom points with our latest adapters:

    • Hpa tap is fully tilted
    • Single stack
    • Straight BB channel for better feeding
    • Mechanical BB stop
    • Mag release has been incorporated into the design
    • Use of multiple brands of magazines now possible
    • Lighter product (weighs only 57 grams!)
    • New material for higher durability and impact strength

    We recommend using a 5.1 magazine.

    84460.jpg?time=1663053901393

    Check the connector you are using US or EU, you must be 100% sure before purchasing this item.

    This adapter is designed to operate between 90 and 120 psi. Works primarily with PTS EPM loaders

    Pistol magazine not included, M4 magazine not included.

    80750.jpg?time=1658399571981

    Creeper Concepts HPA M4 mag adapter for Glock / AAP Gen 3 - US

  • Creeper Concepts HPA M4 mag adapter for Glock / AAP Gen 3 - EU

    New generation, Gen 3!

    New generation of the Creeper concepts adapter has arrived ! This is an adapter printed using Selective Laser Sintering (SLS) technology, which allows you to connect an m4 magazine to your glock pistol or the action army AAP-01

    Some custom points with our latest adapters:

    • Hpa tap is fully tilted
    • Single stack
    • Straight BB channel for better feeding
    • Mechanical BB stop
    • Mag release has been incorporated into the design
    • Use of multiple brands of magazines now possible
    • Lighter product (weighs only 57 grams!)
    • New material for higher durability and impact strength

    84460.jpg?time=1663053901393

    Check the connector you are using US or EU, you must be 100% sure before purchasing this item.

    This adapter is designed to operate between 90 and 120 psi. Works primarily with PTS EPM loaders

    Pistol magazine not included, M4 magazine not included.

    80750.jpg?time=1658399571981

    Creeper Concepts HPA M4 mag adapter for Glock / AAP Gen 3 - EU

Choose your M4 magazine. Chosen by our Workshop for reliability, performance and compatibility. Mid-cap magazine or QRS hi-cap magazine available !

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • PTS 150rds Enhanced Polymer Magazine (EPM) for AEG M4 - OD

    Quantity discount available

    The PTS Enhanced Polymer Magazine is their new 150 Round Mid-capacity Polymer Magazine for AEGs. Externally it features a Dupont Polymer shell, with recessed panels for better grip, and unique magazine well guides that reduce snagging. When the magazine is fully loaded, at the base of the see-through bullet window, an orange follower comes into view as well as the fake 556 bullets which only for show. It allows the end user to pick up any EPM magazine and immediately know if the magazine is filled to capacity and ready to go as it also acts a visual indicator for the user to show that it's full. The bottom of the base plate has been designed with an angled surface and a rubber overmold on the lower face. This combination of features allows the end user to rest the gun on any flat shooting platform and have more surface contact with better traction and therefore greater stability.

    It is compatible with Version 2 M4 AEGs such as:

    • Tokyo Marui,
    • KWA,
    • PTS PDR-C,
    • PTS ERGs,
    • PTS Masada,
    • G&P AEGs,
    • VFC 416,
    • And the CA 416.

    Features:

    • 150 Round Capacity
    • Orange Full Indicator
    • Rubber Floorplate
    • Durable DuPont Polymer material



    PTS 150rds Enhanced Polymer Magazine (EPM) for AEG M4 - OD

  • PTS EPM1 Enhanced Polymer Magazine One for AEG - Black

    The PTS® Enhanced Polymer Magazine ONE, or EPM1, is the most advanced and highest capacity spring loaded AEG magazine ever produced. Aptly named the EPM1, the magazine is the FIRST in many ways:

    • The EPM1 is the First collaborative development between PTS and Odin Innovations
    • The EPM1 is the First spring loaded AEG magazine to rival the capacity of a high cap mag with an approximate 250 bb capacity
    • The EPM1 is the First AEG magazine with a “Fuel Gauge” window to indicate full or remaining bb load
    • The EPM1 is the First magazine to reliably achieve both high load capacity and high rate of fire performance

    Externally, the EPM1 has also been updated significantly.  As with the original EPM and all PTS polymer products, the EPM1 shell is made with Dupont Zytel® polymer which makes it extremely durable and strong.  Another carryover feature is the continuous mag well guide to reduce snagging when drawing from or inserting into pouches or the rifle mag well.  Our signature EP texture has been implemented onto the shell to give the magazine a positive texture for better grip and tactile feel.  The texture along the spines have been changed to ridges for even more positive tactility and allows the EPM1 to be compatible with the Magpul Maglink® Coupler. 

    The baseplate of the EPM1 has also been completely redesigned.  The slide-in design makes the baseplate more durable and resistant to damage or popping off if the magazine is dropped.  It is also significantly slimmer than the first generation EPM’s so stacking the magazines in pouches or during storage takes up less space than before.  The basepad’s heel is angled to be able to act as a monopod during supported shooting and, as before, a marking matrix is incorporated into the basepad for magazine identification use.  The ribbed front ledge that provides positive indexing of the magazine when drawing from a pouch or plate carrier is now incorporated into the EPM1’s main body.

    The new enhanced magazine follower is the result of our design collaboration with Deranged Designs. The improved follower keeps the pressure of the spring concentrated in line with the bb stack instead adding sideways pressure to the bb stack and against the walls of the magazine bb channel. This new follower design greatly improves the bb feeding speed and consistency and completely prevents bbs from sliding past the follower and creating a jam.

    The most significant and innovative external feature of the EPM1 is the Fuel Gauge window.  With the new unique orange mag level indicator, you can immediately know if the magazine is filled to capacity, its approximate remaining capacity, or if the magazine is empty. When the magazine is fully loaded, mag level indicator will show at the top of the window. As you fire the bb’s out of the EPM1, the orange indicator will travel down the window until it reaches the bottom of the window at which time the magazine is emptied.

    This high capacity AEG magazine holds 250+ rounds with the same reliability that all PTS magazines have long been famous for. It is compatible with most Airsoft AR-15 M4 AEGs including Tokyo Marui, KWA, G&P, VFC, including the HK416, PTS PDR-C, PTS ERG series, PTS Masada AEG, the AMOEBA AM Variants, and many more.

    59671.jpg?time=1604331489413

    Features :

    • Dupont Zytel® polymer shell
    • 250 BBs capacity
    • Orange mag level indicator
    • High efficiency compression spring
    • Low friction internal shell
    • Unique magazine mag well guide that reduce snagging
    • EP dot pattern texture for better grip
    • New polymer baseplate with angled surface and dot matrix
    • New design follower prevents bbs jam

    Specifications :

    • Color – Black
    • Material – Dupont™ Zytel High Performance Reinforced Polymer
    • Dimension – 180 x 72 x 26mm
    • Weight – 207g approx. empty
    • Capacity – 250+ rounds
    • Compatibility : Tokyo Marui Style AR-15 AEG,G&P AR-15 AEG, PTS ERG AR-15 AEG, PTS Masada AEG, PTS PDR-C AEG, VFC AR-15 & HK416 AEG Airsoft,CA AR-15 & 416 AEG Airsoft,Krytac,AMOEBA AM Variants AEG Airsoft

    Disclaimer: This product is for airsoft, training, and simulation purposes only.  Utilizing Airsoft products improperly, including in real firearm applications, are potentially dangerous and may cause serious injury.  PTS will not accept any responsibility or liability for misuse of this product.

    We draw your attention for some important points before placing your order :

    • Keeping a magazine fully compressed for an extended period of time creates a risk of spring damage. No guarantee will be made for sagging springs.
    • Use a flawless BBS with perfect smoothness. The internal system of the mag  cannot become blocked unless two BBS get stuck each other. In that case no warranty for product manufacturing defect can be claimed.
    • The capacity of 250 Bbs is a manufacturer's announcement, This capacity is difficult to reach because the spring is extremly powerful. Powair6 advises to self limit the quantity to 220 BBs inside the magazine

    PTS EPM1 Enhanced Polymer Magazine One for AEG - Black

  • PTS EPM1 Enhanced Polymer Magazine One for AEG - Dark Earth

    The PTS® Enhanced Polymer Magazine ONE, or EPM1, is the most advanced and highest capacity spring loaded AEG magazine ever produced. Aptly named the EPM1, the magazine is the FIRST in many ways:

    • The EPM1 is the First collaborative development between PTS and Odin Innovations
    • The EPM1 is the First spring loaded AEG magazine to rival the capacity of a high cap mag with an approximate 250 bb capacity
    • The EPM1 is the First AEG magazine with a “Fuel Gauge” window to indicate full or remaining bb load
    • The EPM1 is the First magazine to reliably achieve both high load capacity and high rate of fire performance

    Externally, the EPM1 has also been updated significantly.  As with the original EPM and all PTS polymer products, the EPM1 shell is made with Dupont Zytel® polymer which makes it extremely durable and strong.  Another carryover feature is the continuous mag well guide to reduce snagging when drawing from or inserting into pouches or the rifle mag well.  Our signature EP texture has been implemented onto the shell to give the magazine a positive texture for better grip and tactile feel.  The texture along the spines have been changed to ridges for even more positive tactility and allows the EPM1 to be compatible with the Magpul Maglink® Coupler. 

    The baseplate of the EPM1 has also been completely redesigned.  The slide-in design makes the baseplate more durable and resistant to damage or popping off if the magazine is dropped.  It is also significantly slimmer than the first generation EPM’s so stacking the magazines in pouches or during storage takes up less space than before.  The basepad’s heel is angled to be able to act as a monopod during supported shooting and, as before, a marking matrix is incorporated into the basepad for magazine identification use.  The ribbed front ledge that provides positive indexing of the magazine when drawing from a pouch or plate carrier is now incorporated into the EPM1’s main body.

    The new enhanced magazine follower is the result of our design collaboration with Deranged Designs. The improved follower keeps the pressure of the spring concentrated in line with the bb stack instead adding sideways pressure to the bb stack and against the walls of the magazine bb channel. This new follower design greatly improves the bb feeding speed and consistency and completely prevents bbs from sliding past the follower and creating a jam.

    The most significant and innovative external feature of the EPM1 is the Fuel Gauge window.  With the new unique orange mag level indicator, you can immediately know if the magazine is filled to capacity, its approximate remaining capacity, or if the magazine is empty. When the magazine is fully loaded, mag level indicator will show at the top of the window. As you fire the bb’s out of the EPM1, the orange indicator will travel down the window until it reaches the bottom of the window at which time the magazine is emptied.

    This high capacity AEG magazine holds 250+ rounds with the same reliability that all PTS magazines have long been famous for. It is compatible with most Airsoft AR-15 M4 AEGs including Tokyo Marui, KWA, G&P, VFC, including the HK416, PTS PDR-C, PTS ERG series, PTS Masada AEG, the AMOEBA AM Variants, and many more.

    59671.jpg?time=1604331489413

    Features :

    • Dupont Zytel® polymer shell
    • 250 BBs capacity
    • Orange mag level indicator
    • High efficiency compression spring
    • Low friction internal shell
    • Unique magazine mag well guide that reduce snagging
    • EP dot pattern texture for better grip
    • New polymer baseplate with angled surface and dot matrix
    • New design follower prevents bbs jam

    Specifications :

    • Color – Black
    • Material – Dupont™ Zytel High Performance Reinforced Polymer
    • Dimension – 180 x 72 x 26mm
    • Weight – 207g approx. empty
    • Capacity – 250+ rounds
    • Compatibility : Tokyo Marui Style AR-15 AEG,G&P AR-15 AEG, PTS ERG AR-15 AEG, PTS Masada AEG, PTS PDR-C AEG, VFC AR-15 & HK416 AEG Airsoft,CA AR-15 & 416 AEG Airsoft,M4 Krytac, AMOEBA AM Variants AEG Airsoft

    Disclaimer: This product is for airsoft, training, and simulation purposes only.  Utilizing Airsoft products improperly, including in real firearm applications, are potentially dangerous and may cause serious injury.  PTS will not accept any responsibility or liability for misuse of this product.

    We draw your attention for some important points before placing your order :

    • Keeping a magazine fully compressed for an extended period of time creates a risk of spring damage. No guarantee will be made for sagging springs.
    • Use a flawless BBS with perfect smoothness. The internal system of the mag  cannot become blocked unless two BBS get stuck each other. In that case no warranty for product manufacturing defect can be claimed.
    • The capacity of 250 Bbs is a manufacturer's announcement, This capacity is difficult to reach because the spring is extremly powerful. Powair6 advises to self limit the quantity to 220 BBs inside the magazine
    PTS EPM1 Enhanced Polymer Magazine One for AEG - Dark Earth

  • PTS EPM1-S Enhanced Polymer Magazine One for AEG - Black

    The PTS EPM1-S AEG magazine, made with the same technology as our EPM1, is a 20R length short M4 magazine that holds an incredible 170 round bb capacity and offers the same reliability that all PTS magazines have long been famous for. It is compatible with most Airsoft AR-15 M4 AEGs including Tokyo Marui, KWA, G&P, VFC, including the HK416, PTS PDR-C, PTS ERG series, PTS Masada AEG, the AMOEBA AM Variants, and many more. The magazine is available in Black and Dark Earth.

    About the EPM1

    The PTS® Enhanced Polymer Magazine ONE, or EPM1, is the most advanced and highest capacity spring loaded AEG magazine ever produced. Aptly named the EPM1, the magazine is the FIRST in many ways:

    • The EPM1 is the First collaborative development between PTS and Odin Innovations
    • The EPM1 is the First spring loaded AEG magazine to rival the capacity of a high cap mag with an approximate 170 bb capacity
    • The EPM1 is the First AEG magazine with a “Fuel Gauge” window to indicate full or remaining bb load
    • The EPM1 is the First magazine to reliably achieve both high load capacity and high rate of fire performance

    Features :

    • Dupont Zytel® polymer shell
    • Orange mag level indicator
    • High efficiency compression spring
    • Low friction internal shell
    • Unique magazine mag well guide that reduce snagging
    • EP dot pattern texture for better grip
    • New polymer baseplate with angled surface and dot matrix
    • New design follower prevents bbs jam

    Specifications :

    • Material – Dupont™ Zytel High Performance Reinforced Polymer
    • Compatibility : Tokyo Marui Style AR-15 AEG,G&P AR-15 AEG, PTS ERG AR-15 AEG, PTS Masada AEG, PTS PDR-C AEG, VFC AR-15 & HK416 AEG Airsoft,CA AR-15 & 416 AEG Airsoft,Krytac,AMOEBA AM Variants AEG Airsoft

    Disclaimer: This product is for airsoft, training, and simulation purposes only.  Utilizing Airsoft products improperly, including in real firearm applications, are potentially dangerous and may cause serious injury.  PTS will not accept any responsibility or liability for misuse of this product.

    We draw your attention for some important points before placing your order :

    • Keeping a magazine fully compressed for an extended period of time creates a risk of spring damage. No guarantee will be made for sagging springs.
    • Use a flawless BBS with perfect smoothness. The internal system of the mag  cannot become blocked unless two BBS get stuck each other. In that case no warranty for product manufacturing defect can be claimed.
    • The capacity is a manufacturer's announcement, This capacity is difficult to reach because the spring is extremly powerful. Powair6 advises to self limit the quantity to 220 BBs for EPM1 and 150 BBs for EPM1-S
    PTS EPM1-S Enhanced Polymer Magazine One for AEG - Black

  • PTS EPM1-S Enhanced Polymer Magazine One for AEG - Dark Earth

    The PTS EPM1-S AEG magazine, made with the same technology as our EPM1, is a 20R length short M4 magazine that holds an incredible 170 round bb capacity and offers the same reliability that all PTS magazines have long been famous for. It is compatible with most Airsoft AR-15 M4 AEGs including Tokyo Marui, KWA, G&P, VFC, including the HK416, PTS PDR-C, PTS ERG series, PTS Masada AEG, the AMOEBA AM Variants, and many more. The magazine is available in Black and Dark Earth.

    About the EPM1

    The PTS® Enhanced Polymer Magazine ONE, or EPM1, is the most advanced and highest capacity spring loaded AEG magazine ever produced. Aptly named the EPM1, the magazine is the FIRST in many ways:

    • The EPM1 is the First collaborative development between PTS and Odin Innovations
    • The EPM1 is the First spring loaded AEG magazine to rival the capacity of a high cap mag with an approximate 170 bb capacity
    • The EPM1 is the First AEG magazine with a “Fuel Gauge” window to indicate full or remaining bb load
    • The EPM1 is the First magazine to reliably achieve both high load capacity and high rate of fire performance

    Features :

    • Dupont Zytel® polymer shell
    • Orange mag level indicator
    • High efficiency compression spring
    • Low friction internal shell
    • Unique magazine mag well guide that reduce snagging
    • EP dot pattern texture for better grip
    • New polymer baseplate with angled surface and dot matrix
    • New design follower prevents bbs jam

    Specifications :

    • Material – Dupont™ Zytel High Performance Reinforced Polymer
    • Compatibility : Tokyo Marui Style AR-15 AEG,G&P AR-15 AEG, PTS ERG AR-15 AEG, PTS Masada AEG, PTS PDR-C AEG, VFC AR-15 & HK416 AEG Airsoft,CA AR-15 & 416 AEG Airsoft,Krytac,AMOEBA AM Variants AEG Airsoft

    Disclaimer: This product is for airsoft, training, and simulation purposes only.  Utilizing Airsoft products improperly, including in real firearm applications, are potentially dangerous and may cause serious injury.  PTS will not accept any responsibility or liability for misuse of this product.

    We draw your attention for some important points before placing your order :

    • Keeping a magazine fully compressed for an extended period of time creates a risk of spring damage. No guarantee will be made for sagging springs.
    • Use a flawless BBS with perfect smoothness. The internal system of the mag  cannot become blocked unless two BBS get stuck each other. In that case no warranty for product manufacturing defect can be claimed.
    • The capacity is a manufacturer's announcement, This capacity is difficult to reach because the spring is extremly powerful. Powair6 advises to self limit the quantity to 220 BBs for EPM1 and 150 BBs for EPM1-S
    PTS EPM1-S Enhanced Polymer Magazine One for AEG - Dark Earth

  • LONEX 200 rounds mid cap magazine for M4 AEG - Black

    Bo manufacture / Lonex 200 rounds mid cap polymer magazine for M4 AEG

    - Spring operated

    - 200 rounds capacity !

    LONEX 200 rounds mid cap magazine for M4 AEG - Black

  • LONEX 200 rounds mid cap magazine for M4 AEG - tan

    Bo manufacture / Lonex 200 rounds mid cap polymer magazine for M4 AEG

    - Spring operated

    - 200 rounds capacity !

    LONEX 200 rounds mid cap magazine for M4 AEG - tan

  • LONEX 200 rounds mid cap magazine for M4 AEG - RED

    Bo manufacture / Lonex 200 rounds mid cap polymer magazine for M4 AEG

    - Spring operated

    - 200 rounds capacity !

    LONEX 200 rounds mid cap magazine for M4 AEG - RED

  • VFC QRS 120rds Magazine for M4 AEG Series - Black

    The QMAG from VFC is a new magazine line by VFC that is entirely differnt to what they had before. The QMAG is a polymer magazine that fits all Umarex VFC M4 AEG series and 416 AEG series magwell. It has diamond hexagonal shape composite reinforced ribs and anti-skid textured surface to ensure the magazine has enough grip on it in every condition. The floor plate is also designed to be reinforced in structure for higher durability and shaped to be easier to be pulled out from your magazine pouches. The mid-cap version holds 120 rounds.

    VFC QRS 120rds Magazine for M4 AEG Series - Black

  • VFC QRS 120rds Magazine for M4 AEG Series - DE

    The QMAG from VFC is a new magazine line by VFC that is entirely differnt to what they had before. The QMAG is a polymer magazine that fits all Umarex VFC M4 AEG series and 416 AEG series magwell. It has diamond hexagonal shape composite reinforced ribs and anti-skid textured surface to ensure the magazine has enough grip on it in every condition. The floor plate is also designed to be reinforced in structure for higher durability and shaped to be easier to be pulled out from your magazine pouches. The mid-cap version holds 120 rounds.

    VFC QRS 120rds Magazine for M4 AEG Series - DE

  • VFC QRS 300rds Hi-Cap Magazine for M4 AEG Series - DE

    The QMAG from VFC is a new magazine line by VFC that is entirely differnt to what they had before. The QMAG is a polymer magazine that fits all Umarex VFC M4 AEG series and 416 AEG series magwell. It has diamond hexagonal shape composite reinforced ribs and anti-skid textured surface to ensure the magazine has enough grip on it in every condition. The floor plate is also designed to be reinforced in structure for higher durability and shaped to be easier to be pulled out from your magazine pouches. The Hi-cap version holds 300 rounds.

    VFC QRS 300rds Hi-Cap Magazine for M4 AEG Series - DE

  • VFC QRS 300rds Hi-Cap Magazine for M4 AEG Series - Black

    The QMAG from VFC is a new magazine line by VFC that is entirely differnt to what they had before. The QMAG is a polymer magazine that fits all Umarex VFC M4 AEG series and 416 AEG series magwell. It has diamond hexagonal shape composite reinforced ribs and anti-skid textured surface to ensure the magazine has enough grip on it in every condition. The floor plate is also designed to be reinforced in structure for higher durability and shaped to be easier to be pulled out from your magazine pouches. The Hi-cap version holds 300 rounds.

    VFC QRS 300rds Hi-Cap Magazine for M4 AEG Series - Black

arrow_drop_downRécapitulatif :

Total :

Partagez votre création avec vos amis.

More info

M4 HPA magazine kit assembled by our workshop. the kit consists of 3 parts:

  • A gas magazine suitable for your GLOCK or AAP01 replica (choose from the drop down menu). It must be of the same brand and model as your replica. If you have any doubts about which version to choose, please contact us first.
  • An HPA adapter which makes the link between the M4 AEG magazine and the gas magazine (choose from the drop down menu). They are all compatible but be careful to select the same connector version as your own HPA line (US or EU). If you have any doubts about which version to choose, please contact us first.
  • An M4 AEG magazine chosen for its quality and compatibility (choose from the drop down menu)

The kit is delivered complete and assembled according to the options chosen, it will be tested in waterproofing as well as on our shooting range with a GBB replica to ensure about the good working before shipment. Remaining parts of the GBB magazine that are not used of course comes with your package.

Please note that some internal modifications can be carried out on the various parts in order to obtain optimal working. To avoid compatibility problems, please do not choose a gas magazine that does not correspond exactly to the same brand and model as your own replica, for any questions related to your model, do not hesitate to contact us by e-mail or telephone.

  •     MAX allowable pressure: 110 PSI

Data sheet

TypePistolet
Caliber6mm Airsoft
MaterialPolymer / Metal
Power sourceHPA

Customization

After saving your customized product, remember to add it to your cart.

loader

* required fields

Magazine advice

Despite everything you can read on the internet and on on the manufacturer's manual, we recommend that you never introduce silicone or grease into airsoft magazines. Greasing has a devastating effect on a replica since it will directly grease the hop-up rubber and inner barrel, resulting in a loss of precision and even more accentuated dust fixing. Never introduce chemical products such as grease, silicone spray or any other kind into the magazine, the hop-up unit, the BBs, the internal parts of the AEGs. The silicone is only used on pneumatic parts such as a gearbox cylinder or a moving O-ring. Special recommandation regarding Mid-cap Magazine :

  • Limit the number of bbs by 70-80% of the mid-cap capacity, never force the introduction of the BBs with a BB loader.
  • Too many BBs can slow down the operation of the nozzle and that can have repercussions on the trajectory of the bbs and the feed.
  • If you want to keep your magazine for many years, it is also imperative for not working the spring to the maximum of its capabilities.
  • Never store your magazine filled for a long period of use, the spring loaded for a long time may be irreparably damaged with a settling effect.
  • Use BBs with irreproachable sphericity

P6 Workshop

P6 Workshop

Our own Airsoft Workshop Brand based in Pechbonnieu France

See all products from P6 Workshop

Questions  (3)

A partir de sacha | 2023-08-10 20:41:31

Bonjour je possede se model je voudrais le passer en hi-capa est-ce que la modification est possible ?

Powair6

bonjour, non sa ne serra pas compatible hi-capa .
Cordialement

A partir de Gianni | 2023-05-16 17:58:44

Bonjour est t'il compatible avec le we galaxy
Merci

Powair6

Bonjour , non il ne sera pas compatible .
Cordialement,

A partir de Sacha | 2023-01-16 10:37:16

version compatible pour glock 17 gen5 cybergun

Powair6

Bonjour;
le plus simple serait de monter le kit directement sur le chargeur d'origine.
Cordialement.

Page: 1
Seuls les utilisateurs enregistrés peuvent poser une question. Login

Avis (1)

Seuls les clients enregistrés peuvent poster un avis. Connectez-vous ou créez un compte .
Tri:
5/5
recu tres bien emballer et zero fuite
Cet avis a été posté pour HPA M4 Magazine kit for GLOCK / AAP01 series GBB
Voir plus d'avis