> >>P6 CM041 MP5 series custom HPA
P6 CM041 MP5 series custom HPA - View larger

P6 CM041 MP5 series custom HPA

P6-HPA-CM041

New product

Preparation time : 2-5 days

Moyenne des votes pour ce produit
0 / 5
Moyenne : 0 / 5
Basée sur 0 avis clients.

Configure

Si vous souhaitez enregistrer votre configuration, vous devez d'abord vous connecter.

Connexion

Customize your product

Choose your replica version. P6 Workshop Team will prepare, customize, adjust and test your custom replica before shipping, a 140€ fees is asked for this service and added to the replica base price.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • CYMA CM041J MP5 A3

    CM041J MP5 A3 is manufactured by CYMA. It is the next quantum leap in the production of replicas by Chinese manufacturers.

    NOTICE! Replica have a unique serial number!

    It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper, outer barrel, sights, suppressor, stock - ZnAl). the stock foot and the lower receiver are very precisely made, the material from which they are made is nylon (the same material as used for the production of parts in real weapons).

    Feature :

    • Reinforced ver.2 gearbox
    • Steel gears
    • 7mm bushings
    • The spring guide is reinforced (metal) together with the bearing (note: guides v.3 are used)
    • Polymer piston has metal teeth
    • Cylinder - type "1" - was covered with black nickel "SMOKED" on the copper substrate
    • Silent piston and cylinder head set made of aluminum and covered with a blue anode
    • CNC aluminum cylinder head

    The way how gearbox is functioning will surprise a user. It is also worth adding that the model is fully compatible with parts and accessories of other manufacturers, which is important for all types of modifications. The replica has a powerful engine with increased torque equipped with neodymium magnets.

    Set include :

    • replica CM041J MP5 A3
    • magazine Hi cap 200 rd
    298,25 €
    CYMA CM041J MP5 A3

    298,25 €

  • CYMA CM041B MP5 A4

    CM041B MP5 A4 is manufactured by CYMA. It is the next quantum leap in the production of replicas by Chinese manufacturers.

    NOTICE! Replica have a unique serial number!

    It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper, outer barrel, sights, suppressor, stock - ZnAl). the stock foot and the lower receiver are very precisely made, the material from which they are made is nylon (the same material as used for the production of parts in real weapons).

    Feature :

    • Reinforced ver.2 gearbox
    • Steel gears
    • 7mm bushings
    • The spring guide is reinforced (metal) together with the bearing (note: guides v.3 are used)
    • Polymer piston has metal teeth
    • Cylinder - type "1" - was covered with black nickel "SMOKED" on the copper substrate
    • Silent piston and cylinder head set made of aluminum and covered with a blue anode
    • CNC aluminum cylinder head

    The way how gearbox is functioning will surprise a user. It is also worth adding that the model is fully compatible with parts and accessories of other manufacturers, which is important for all types of modifications. The replica has a powerful engine with increased torque equipped with neodymium magnets.

    Set include :

    • Replica CM041B MP5 A4
    • magazine Hi cap 200 rd
    • Front grip
    298,25 €
    CYMA CM041B MP5 A4

    298,25 €

  • CYMA CM041 MP5 A4 folding stock

    CM041 MP5 A4 folding stock is manufactured by CYMA. It is the next quantum leap in the production of replicas by Chinese manufacturers.

    NOTICE! Replica have a unique serial number!

    It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper, outer barrel, sights, suppressor, stock - ZnAl). the stock foot and the lower receiver are very precisely made, the material from which they are made is nylon (the same material as used for the production of parts in real weapons).

    Feature :

    • Reinforced ver.2 gearbox
    • Steel gears
    • 7mm bushings
    • The spring guide is reinforced (metal) together with the bearing (note: guides v.3 are used)
    • Polymer piston has metal teeth
    • Cylinder - type "1" - was covered with black nickel "SMOKED" on the copper substrate
    • Silent piston and cylinder head set made of aluminum and covered with a blue anode
    • CNC aluminum cylinder head

    The way how gearbox is functioning will surprise a user. It is also worth adding that the model is fully compatible with parts and accessories of other manufacturers, which is important for all types of modifications. The replica has a powerful engine with increased torque equipped with neodymium magnets.

    Set include :

    • replica CM041 MP5 A4 folding stock
    • magazine Hi cap 200 rd
    • front grip
    298,25 €
    CYMA CM041 MP5 A4 folding stock

    298,25 €

  • CYMA CM041 MP5 SD6

    CM.041 SD6 is manufactured by CYMA. It is the next quantum leap in the production of replicas by Chinese manufacturers.

    NOTICE! Replica have a unique serial number!

    It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper, outer barrel, sights, suppressor, stock - ZnAl). the stock foot and the lower receiver are very precisely made, the material from which they are made is nylon (the same material as used for the production of parts in real weapons).

    Feature :

    • Reinforced ver.2 gearbox
    • Steel gears
    • 7mm bushings
    • The spring guide is reinforced (metal) together with the bearing (note: guides v.3 are used)
    • Polymer piston has metal teeth
    • Cylinder - type "1" - was covered with black nickel "SMOKED" on the copper substrate
    • Silent piston and cylinder head set made of aluminum and covered with a blue anode
    • CNC aluminum cylinder head

    The way how gearbox is functioning will surprise a user. It is also worth adding that the model is fully compatible with parts and accessories of other manufacturers, which is important for all types of modifications. The replica has a powerful engine with increased torque equipped with neodymium magnets.

    Set includes:

    • replica CM.041 SD6
    • magazine Hi cap 200 rd
    294,08 €
    CYMA CM041 MP5 SD6

    294,08 €

  • CYMA CM041G

    CM.041G

    Specification :

    · 9" external barrel, with a 14mm thread CCW
    · 6.3" aluminum MLOCK handguard
    · aluminium 6-position PDW stock with battery compartment
    · extended top mount rail for the red dot sight and accessories
    · polymer magazine with dummy ammo
    · ambi magazine release
    · flat trigger
    · front and rear sling attachments

    The pistol in the new E-EDITION & HIGH-SPEED configuration has a velocity of around 350-360 fps and, in combination with a LiPo battery, a ROF around 25rps and a faster trigger response. This was achieved due to the new gearbox parts with increased durability, such as:

    · reinforced V2 gearbox frame
    · processor unit with built-in MOSFET system
    · full steel teeth polycarbonate piston
    · CNC machined steel gear set (ratio: 13:1)
    · CNC machined aluminum silent cylinder and piston head set (ball bearing piston head, double o-ring cylinder head)
    · ball bearing spring guide
    · high-speed motor

    Set included :

    · SMG replica
    · 130rd Mid-Cap magazine

    364,92 €
    CYMA CM041G

    364,92 €

  • CYMA CM041 MP5 SD6 High Speed

    CM.041 SD6 is manufactured by CYMA. It is the next quantum leap in the production of replicas by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper, outer barrel, sights, suppressor, stock - ZnAl). the stock foot and the lower receiver are very precisely made, the material from which they are made is nylon (the same material as used for the production of parts in real weapons).

    Feature :

    • Reinforced ver.2 gearbox with QD spring change
    • Steel gears 13:1 high speed ratio
    • 7mm bushings
    • High speed motor
    • Polymer piston has metal teeth
    • stainless steel Cylinder
    • Silent piston and cylinder head set made of aluminum
    • CNC aluminum cylinder head
    • Unique serial number

    The way how gearbox is functioning will surprise a user. It is also worth adding that the model is fully compatible with parts and accessories of other manufacturers, which is important for all types of modifications. The replica has a powerful engine with increased torque equipped with neodymium magnets.

    Set include :

    • replica CM.041 SD6
    • magazine mid cap 130rds
    364,92 €
    CYMA CM041 MP5 SD6 High Speed

    364,92 €

Choose your HPA System. Our base price already include Inferno Spartan. By adding the price difference you can replace by another HPA engine.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Wolverine Inferno GEN2 Spartan M4

    The GEN 2 Inferno is the culmination of a great deal of work to take the next step forward in the development of HPA technology. Over the past couple years since we launched the SMP, multiple other companies saw the value of this type of technology and have attempted to replicate its performance. The Gen2 once again leaves everyone far behind.

    The GEN 2 Inferno features a revolutionary single solenoid, independent poppet and nozzle design that sets a new standard for a drop in kit. Particularly, it is designed to solve the "open bolt problem". It is a hybrid design which keeps the advantages of an open bolt system: easy tuning, no first round dry fire, efficiency, and adds the simplicity of easier hop up tuning that closed bolt systems have traditionally offered. In addition, it further improves the efficiency over our previous systems by an estimated 10-15%. Here are a few highlights!
    Features:

    • Patent Pending independent poppet and nozzle design
    • Spartan`s Edition integrate FCU onto the trigger board
    • Hybrid design allows pause between bb loading and bb firing
    • Improves hop up performance with a wide range of stock and aftermarket options
    • Still uses Wolverine Airsoft`s Patent Pending Imbalanced Poppet
    • Backwards compatible with all Wolverine Airsoft electronics.
    • Still uses bullet proof direct solenoid fired design
    • NO ADDITIONAL CRITICAL ORINGS--> No negative impact on reliability!
    • Estimated 10-15% efficiency improvement

      For details about installation, please visit https://wolverineairsoft.com/installationtips/.

    Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.

    316,58 €
    Wolverine Inferno GEN2 Spartan M4

    316,58 €

  • Wolverine Inferno GEN2 Premium M4

    The GEN 2 Inferno is the culmination of a great deal of work to take the next step forward in the development of HPA technology. Over the past couple years since we launched the SMP, multiple other companies saw the value of this type of technology and have attempted to replicate its performance. The Gen2 once again leaves everyone far behind.

    The GEN 2 Inferno features a revolutionary single solenoid, independent poppet and nozzle design that sets a new standard for a drop in kit. Particularly, it is designed to solve the "open bolt problem". It is a hybrid design which keeps the advantages of an open bolt system: easy tuning, no first round dry fire, efficiency, and adds the simplicity of easier hop up tuning that closed bolt systems have traditionally offered. In addition, it further improves the efficiency over our previous systems by an estimated 10-15%. Here are a few highlights!

    Features:

    • Patent Pending independent poppet and nozzle design
    • Hybrid design allows pause between bb loading and bb firing
    • Improves hop up performance with a wide range of stock and aftermarket options
    • Still uses Wolverine Airsoft`s Patent Pending Imbalanced Poppet
    • Backwards compatible with all Wolverine Airsoft electronics.
    • Still uses bullet proof direct solenoid fired design
    • NO ADDITIONAL CRITICAL ORINGS--> No negative impact on reliability!
    • Estimated 10-15% efficiency improvement

    This model is only suitable for M4 AEG

    Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.

    374,92 €
    Wolverine Inferno GEN2 Premium M4

    374,92 €

  • Wolverine Inferno GEN2 Premium M4 Heretic Edition AEG

    Behold the Wolverine Airsoft INFERNO Gen 2 Heretic Edition – the ultimate upgrade kit engineered for speedsoft enthusiasts! This kit optimizes the award-winning INFERNO Gen 2 hybrid technology with a new Blackleaf Airsoft speed trigger board and updated electronics to give you unrivaled speed, responsiveness, precision, and binary options. Transform your standard V2 AEG into a Heretical masterpiece of HPA performance and dominate the field with blazing-fast trigger responses and unbeatable consistency. Accelerate your gameplay to the next level with the INFERNO Gen 2 Heretic Edition and experience unparalleled control over your airsoft gun.

    INFERNO Gen 2

    •  Independent poppet and nozzle design allows pause between BB loading and BB firing for accurate, consistent velocity
    •  Outstanding hop-up performance with a wide range of stock and aftermarket options
    •  Industry-leading air efficiency
    •  Bullet-proof direct-solenoid-fired design
    •  Full CNC construction
    •  Integrated Filtered Line keeps dust and debris out of engine

    Gen 2 Premium FCU

    •  Intuitive LED menu with tool-less button style programming
    •  High speed trigger algorithm for up to 30 RPS on semi auto
    •  7 customizable fire states including new binary fire mode
    •  Precise adjustment of dwell, rate of fire and burst mode
    •  Short-detection, anti-stiction algorithm, and more

    Speed Trigger Board by Blackleaf Airsoft

    •  Tactile trigger switch for better trigger response
    •  Electronic safety switch (Allows safety function with ultra-short trigger pull)
    •  Durable reinforced trigger switch

    Specifications

    •  Input pressure: 60-140 PSI (Use with STORM Category 5 Regulator for best performance!)
    •  Output energy 0.5-3J adjustable (build dependent)
    •  ROF: 5-35 RPS full-auto, up to 30 RPS Semi
    •  Battery Input: JST 6-8V

    Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.

    374,92 €
    Wolverine Inferno GEN2 Premium M4 Heretic Edition AEG

    374,92 €

  • PolarStar F2 M4

    Product content :

    - Polarstar F2 V2 M4
    - FCU wire harness    
    - FCU REV3    
    - V2 Trigger board    
    - English Manual

    What is F2?

    F2 is essentially a Mini Fusion Engine. It offers the same adjustability and performance as the Fusion Engine in a cylinder sized package.

    Patented Dual Solenoid Design

    The dual solenoid design of the F2™ provides the same functionality as the legendary Fusion Engine™ but in a more compact, efficient and flexible design. Dual solenoids allow for the nozzle and the poppet valve to be adjusted independently of each other for unparalleled control over both the loading time and air volume used. Additionally, this makes it possible to change the firing sequence giving it the ability to operate in both true closed bolt as well as "AEG" mode.

    Increased Efficiency

    The F2™ incorporates a new one-piece, lightweight poppet valve design yet still operates on the same principle as the Fusion Engine™ poppet. This valve is able to operate at lower pressures and uses less air volume to function which optimizes air efficiency. The standard F2 poppet is equivilent to the Red Low-Flow poppet of the Fusion Engine.

    Spring Loaded Nozzle

    The F2™ nozzle is spring biased forward which provides a consistent loading force regardless of operating pressure. It shares the same spring as the Fusion Engine™ with both light and heavy spring options available to adjust the loading force. The robust design of the F2™ allows for an operating pressure range of 45psi to 145psi which enables it to achieve velocities from CQB to DMR while employing only one nozzle for the entire velocity adjustment range.

    What is the difference between F2, F1 and JACK ?

    Both F1 and JACK are "open bolt" systems, meaning the nozzle is in the rearward position when the system is idle and the round is fired during the forward movement of the nozzle. F2 is a dual-solenoid system which allows for complete control over the shot cycle

    Nozzles :

    Over 20 standard F2 nozzles are available for installation into a wide range of replicas. These are numbered, rather than named, since a single nozzle is often compatible with multiple replicas. The "Original Model" listed in the table is the replica from which the nozzle measurements were taken and is for reference. If your gun is not listed in our Compatiblity Database a recommended nozzle length may calculated by measuring your original gearbox and applying the following formula: TIP = F + B - (A/2) - .057. A more precise measurement (which accounts for the hopup and bucking in use) may be obtained by installing a nozzle into the system which is slightly too long for the replica and measuring the nozzle setback when placed into the hopup.

    Options available in the future :

        Offset and Centerline cylinders and nozzles.
        Wire harnesses are available in 7.5", 13" and 18" standard lengths
        Interchangable Bushing Inserts which prevent any movement of F2 within the gearbox.
        Custom nozzle lengths available.
        Low velocity poppets (< 1J) available.
        Light and Heavy nozzle springs available.

    Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.

    416,58 €
    PolarStar F2 M4

    416,58 €

  • Polarstar Fusion Engine v2 M4

    Have you ever dreamed of Polarizing your MP5, G3 or SCAR? With the introduction of the GEN3, now you can! At first glance the GEN3 FE looks very much like the GEN2 and, for the most part, the two are quite similar. However, unlike its predecessor, the FE GEN3 is no longer just for the M4/M16 series rifle. We applied the same concept used with our Version 3 Fusion Engine™ so that it is now able to interface with the selector plate and related components of your existing AEG’s gearbox.

    The FE GEN3 will come complete with a trigger and steel selector plate so that it can be installed into any airsoft gun which is Tokyo Marui compatible. However, by installing a different nozzle or rifle specific conversion kit, you will be able to expand the number of rifles it will be compatible with. In most cases all you’ll need to do is change out the trigger and selector components with ones from your AEG, install a different Fusion Engine™ nozzle, and the engine is ready to use in a completely different model of rifle.

    The internal operation of the Fusion Engine cylinder assembly are exactly the same and share many of the same parts, so it offers the same stellar downrange performance and rock solid reliability as its predecessor. This GEN3 does however feature a new side plate design to accommodate the AEG selector plate and is equipped with a new electronic switchboard. One advantage to this new design is that the switchboard offers a wider contact point with the selector plate to allow for varying tolerances in the rifles selector assembly making for improved out-of-the-box compatibility with an increased number of rifle brands.

    As requested by many of our fans, the FE GEN3 will come standard with our newly redesigned “Milsim Manifold”. This feature enables the user to install an optional 90 degree fitting inside of their engine allowing the air line to be routed to the rear of the engine and exit through the buffer tube sling plate on an M4 series rifle.

    As with all of our engine models, you can quickly change and adjust key functions of the engine via the on-board FCU (Fire Control Unit) which is no bigger than an AEG`s MOSFET and can easily fit inside of a rifles battery compartment along with a small Li-po battery. Using the FCU`s five position joystick and LCD display you will be able to easily adjust such functions as the systems cyclic rate, fire modes and nozzle timing on the fly.

    With the Fusion Engine™ in your rifle you will also be able to adjust its muzzle velocity via the remote air rig (sold separately). Adjusting the PSI output on your air rig will allow you to fine tune your rifles muzzle velocity so you will always be able to get it exactly where you want it. And then for larger velocity changes we offer a series of air nozzles with varying bore sizes to shift the velocity adjustment range up or down to best meet your requirements.

    The best part is that our system is extremely user friendly. Even if you have only the basic understanding of an airsoft rifle, you will find that operating and manipulating this system is very simple and does not require a degree in airsoft engineering to figure out.

     Specifications :
    Fire mode/s : Full Auto, Semi Auto, Variable Burst
    FE Profile: M4
    Included Selector Plate: M4/M16 Series
    Cyclic Rate: 500 RPM to 1,800 RPM
    Fire Modes: Semi / 2 to 9 Shot Burst, Semi / Full Auto, Semi Only
    Power Source: HPA (High Pressure Air via remote air rig)
    FCU Battery: 7.4v Lipo w/ JST Connector
    FCU Voltage Input Range: 6.8v to 12v
    Electronics: REV2
    PSI Operating Range: 80 psi. to 120 psi.
    Build Material: Aluminum

    Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.

    516,58 €
    Polarstar Fusion Engine v2 M4

    516,58 €

  • Polarstar Fusion Engine M4 Red Nozzle & Poppet

    Have you ever dreamed of Polarizing your MP5, G3 or SCAR? With the introduction of the GEN3, now you can! At first glance the GEN3 FE looks very much like the GEN2 and, for the most part, the two are quite similar. However, unlike its predecessor, the FE GEN3 is no longer just for the M4/M16 series rifle. We applied the same concept used with our Version 3 Fusion Engine™ so that it is now able to interface with the selector plate and related components of your existing AEG’s gearbox.

    The FE GEN3 will come complete with a trigger and steel selector plate so that it can be installed into any airsoft gun which is Tokyo Marui compatible. However, by installing a different nozzle or rifle specific conversion kit, you will be able to expand the number of rifles it will be compatible with. In most cases all you’ll need to do is change out the trigger and selector components with ones from your AEG, install a different Fusion Engine™ nozzle, and the engine is ready to use in a completely different model of rifle.

    The internal operation of the Fusion Engine cylinder assembly are exactly the same and share many of the same parts, so it offers the same stellar downrange performance and rock solid reliability as its predecessor. This GEN3 does however feature a new side plate design to accommodate the AEG selector plate and is equipped with a new electronic switchboard. One advantage to this new design is that the switchboard offers a wider contact point with the selector plate to allow for varying tolerances in the rifles selector assembly making for improved out-of-the-box compatibility with an increased number of rifle brands.

    As requested by many of our fans, the FE GEN3 will come standard with our newly redesigned “Milsim Manifold”. This feature enables the user to install an optional 90 degree fitting inside of their engine allowing the air line to be routed to the rear of the engine and exit through the buffer tube sling plate on an M4 series rifle.

    As with all of our engine models, you can quickly change and adjust key functions of the engine via the on-board FCU (Fire Control Unit) which is no bigger than an AEG`s MOSFET and can easily fit inside of a rifles battery compartment along with a small Li-po battery. Using the FCU`s five position joystick and LCD display you will be able to easily adjust such functions as the systems cyclic rate, fire modes and nozzle timing on the fly.

    With the Fusion Engine™ in your rifle you will also be able to adjust its muzzle velocity via the remote air rig (sold separately). Adjusting the PSI output on your air rig will allow you to fine tune your rifles muzzle velocity so you will always be able to get it exactly where you want it. And then for larger velocity changes we offer a series of air nozzles with varying bore sizes to shift the velocity adjustment range up or down to best meet your requirements.

    The best part is that our system is extremely user friendly. Even if you have only the basic understanding of an airsoft rifle, you will find that operating and manipulating this system is very simple and does not require a degree in airsoft engineering to figure out.

    Specifications :

    Comes with Polarstar Red nozzle and Red Poppet

    Fire mode/s : Full Auto, Semi Auto, Variable Burst
    FE Profile: M4
    Included Selector Plate: M4/M16 Series
    Cyclic Rate: 500 RPM to 1,800 RPM
    Fire Modes: Semi / 2 to 9 Shot Burst, Semi / Full Auto, Semi Only
    Power Source: HPA (High Pressure Air via remote air rig)
    FCU Battery: 7.4v Lipo w/ JST Connector
    FCU Voltage Input Range: 6.8v to 12v
    Electronics: REV2
    PSI Operating Range: 80 psi. to 120 psi.
    Build Material: Aluminum

    Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.

    541,58 €
    Polarstar Fusion Engine M4 Red Nozzle & Poppet

    541,58 €

  • P6 Fusion Engine V2 M4 Poppet mod

    Polarstar Fusion Engine modified by P6 Workshop poppet mod wich reduce power and optimize air consumption.

    The Polarstar Fusion Engine poppet is designed to work with all the powers offered by the wide range of nozzles, the original air flow is therefore very high and not optimized for low powers (large air release on poppet side and tiny nozzle diameter). Our preparation carried out in the workshop aims to modify the poppet by reducing the air flow released instantly by the valve and by enlarging the internal diameter of the original nozzle.The poppet air flow modification have only one single hole (unlike the red and yellow Polarstar sprinkler type poppets) and it is identical to the inner diameter of the modified nozzle, which optimizes air flow and air consumption for the requested power. Maximum power at 120 PSI is around 430FPS. FPS results may vary depending on the length and diameter of the barrel.

    P6 poppet & nozzle mod include :

    • Modified Polarstar fusion engine by P6 Workshop
    • Original Poppet lowered air flow by 75%
    • Original Nozzle milled with large aperture with our turning lathe
    • 120 PSI is around 430FPS MAX
    • Comes with REV3 FCU

    FPS may change with inner barrel lenght and inner diameter

    Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.

    554,08 €
    P6 Fusion Engine V2 M4 Poppet mod

    554,08 €

The replica comes with the original macroline out of the motor grip, you can choose US or EU version. You have also the possibility to select our Easyconnect system, in this case a male connector will be fitted directly onto the motor grip, wich mean no more visible macroline hose, it will be much more easier to connect & deconnect your replica with just one hand, and the look is better ! You can also choose US or EU connector following the air system version you have.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Line out of the grip - EU

    0,00 €
    Line out of the grip - EU

    0,00 €

  • Line out of the grip - US

    0,00 €
    Line out of the grip - US

    0,00 €

  • BalystiK EasyConnect fitting EU

    • This pneumatic fitting feature a EU male nipple with 1/8 NPT male thread with self sealing oring inside.
    • Fit all AEG motor grips with 1/8 npt female thread.
    • Only compatible with Balystik EU remotes lines
    • Self sealing oring is only compatible with 6mm hpa hoses such as Polarstar F2, Fusion Engine, Wolverine Inferno, Gate pulsar ....
    • Package include easyconnect pneumatic fitting (grip not included)

    Important note : the thread of 1/8 grips need to be reworked with 1/8 NPT tap to screw the easyconnect completly, if you are not equiped with such tap it is better to get directly a HPA grip already build in our worshop.

    16,58 €
    BalystiK EasyConnect fitting EU

    16,58 €

  • BalystiK EasyConnect fitting US

    • This pneumatic fitting feature a US male nipple with 1/8 NPT male thread with self sealing oring inside.
    • Fit all AEG motor grips with 1/8 npt female thread.
    • Only compatible with US remotes lines such as Balystik and Redline, ninja ... (not compatible with Balystik EU connectors)
    • Self sealing oring is only compatible with 6mm hpa hoses such as Polarstar F2, Fusion Engine, Wolverine Inferno, Gate pulsar ....
    • Package include easyconnect pneumatic fitting (grip not included)

    Important note : the thread of 1/8 grips need to be reworked with 1/8 NPT tap to screw the easyconnect completly, if you are not equiped with such tap it is better to get directly a HPA grip already build in our worshop.

    16,58 €
    BalystiK EasyConnect fitting US

    16,58 €

  • Balystik braided line for HPA replica - Black EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and an additional finishing touch for your replica, ideal for supplying your replica with air in a high-performance and leak-free way during your airsoft games !

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Black EU

    14,08 €

  • Balystik braided line for HPA replica - Black US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Black US

    14,08 €

  • Balystik braided line for HPA replica - Tan EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Tan EU

    14,08 €

  • Balystik braided line for HPA replica - Tan US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Tan US

    14,08 €

  • Balystik braided line for HPA replica - Grey EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Grey EU

    14,08 €

  • Balystik braided line for HPA replica - Grey US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Grey US

    14,08 €

  • Balystik braided line for HPA replica - OD EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - OD EU

    14,08 €

  • Balystik braided line for HPA replica - OD US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - OD US

    14,08 €

  • Balystik braided line for HPA replica - Deep coffee EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Deep coffee EU

    14,08 €

  • Balystik braided line for HPA replica - Deep coffee US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Deep coffee US

    14,08 €

  • Balystik braided line for HPA replica - Red EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Red EU

    14,08 €

  • Balystik braided line for HPA replica - Red US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Red US

    14,08 €

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • SAFE - SEMI - AUTO

    SAFE - SEMI - AUTO

  • SAFE - SEMI - BURST3

    SAFE - SEMI - BURST3

  • SAFE - SEMI ONLY

    SAFE - SEMI ONLY

Thanks to this Bluetooth FCU you can manage settings directly with your ANDROID smartphone. Please note this option is a direct replacement of the standard FCU. You will receive the HPA system with Blutooth FCU and the original FCU won't be delievered. Price include a discount for this standard exchange

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • T238 Bluetooth FCU for Polarstar HPA Engine

    • Bluetooth FCU for HPA engine
    • Compatibility : Polarstar F2, JACK, F1, Fusion engine
    • Auto-load function for gel ball blaster magazines
    • Android APP
    • Support 5~12.6V input voltage

    Functions:

    • Engine Type: This value is very important as it tells the control unit how many solenoids are used in the HPA system
    • CB Mode: Allows you to select the firing sequence with double solenoid setup : Open Bolt or closed Bolt
    • RAMP Mode : RAMP feature comes from paintball and let you to fire slow on SEMI mode. When firing speed increase and reach a preset threshold, the rifle will start firing on FULL AUTO mode while cadence remain the same: if it decrease, rifle will return on SEMI mode. (When enable RAMPMode, full-auto switch will be disabled)
    • Sniper Delay: When enable Sniper Delay, full-auto switch will be disabled, and the engine will only work in semi-auto mode, after each shot, the FCU will let you wait a period of time, and the length is determined by the set value
    • Magazine capacity limit: This function, if enabled, will cause the control unit to stop working once it reaches the set number of strokes and to resume, wait 2 seconds. This allows you to simulate mid / low cap magazines even if magazines with higher capacities are mounted underneath, moreover if set the real capacity of the assembled magazines you will avoid shooting empty.
    • Auto-load: When detect a connection of a gel ball magazine, the FCU will power the magazine for a period of time, and the length is determined by the set value
    • Friction Timer and Friction Value: Although often unnecessary with a well set replica, it may sometimes be necessary to set a higher poppet dwell value to overcome static friction. Static friction is a physical phenomenon that causes the first bullet to be fired after a period of inactivity and comes out with lower powers. If you notice that after a few minutes of inactivity the first bullet finds it difficult to be fired, or comes out weaker, it could be the fault of the static friction. Chose after how much seconds from last shoot (Friction Timer) your Friction Value will be summed to your Poppet Dwell (just the first shot). Put both these value to 0 to deactivate this function.
    • SEMI and AUTO: On some parameters you can read the words SEMI or AUTO before, this has be done to have different parameters value depending on your Fire Selector Position. When your gun is on Semi, FCU will use the Semi parameters otherwise, if in Auto position, will use the other.
    • Poppet Dwell: These are among the most important, and indicates how many tenths of a millisecond the solenoid will remain activated. We suggest to never set a value less than 30 to avoid missed shots or other problems.
    • Nozzle Dwell: Another fundamental value is Nozzle Dwell. Expressed in milliseconds, it indicates the time required to load the bullet into thehop-up chamber. It is used only on 2-solenoid systems. Its value depends very much on the BB Magazines used. We suggest never to go below 8 to avoid the risk of jamming or other BB loading problems.
    • Poppet Delay: It is a wait value expressed in milliseconds, a low value is useful for having higher ROF or reactivity, but often at the expense of precision. It should never be set to 0 nor too low. If the replica fails,increase this value. We suggest to never set a value less than 4.
    • Nozzle Delay: It is a wait value expressed in milliseconds, a low value is useful for having higher ROF or reactivity, but often at the expense of precision. It should never be set to 0 nor too low. If the replica fails, increase this value. It is advisable not to drop below 4

    Connection details :

    • 1 = Common positive +5V
    • 2 = Trigger switch: closing this contact to +5v positive will fire the BB
    • 3 = Full Auto Switch: closing this contact to +5v positive will activate the Auto Mode
    • 4 = Poppet Power Supply: this contact and +5V common positive will power on the Poppet Solenoid
    • 5 = Nozzle Power Supply: this contact and +5V common positive will power on the Nozzle Solenoid
    • 6 = It's a trigger driven negative Voltage
    • 7 = It's a direct battery positive Voltage
    • 8 = It's a trigger driven negative Voltage with auto-load function for gel ball blaster magazine
    • Connector allowed are JST ZH 5Pin and JST ZH 3Pin.

    *** Attention ***

    The extra cables provided are not necessary for the operation of a Polarstar system. You just have to plug in your Polarstar wire to make it work. Any extra wiring modification giving polarity inversions that will permanently damage the FCU will not be covered under warranty.

    58,28 €
    T238 Bluetooth FCU for Polarstar HPA Engine

    58,28 €

This part will be assembled and tested

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • 4UANTUM Rubber AEG hop-up Friction Pro-High Performance

    Designed to achieve ultimate consistency, the Friction Pro hop-up bucking focuses on creating a perfectly centered axis of spin in every shot. While based on a rather traditional single-point design, the unique contour of the contact patch generates enough friction to even lift heavy BBs up to 0.48 grams, while minimizing contact surface to ensure there’s no room for error. Resulting in a flat, consistent, and accurate trajectory! 

    10,75 €
    4UANTUM Rubber AEG hop-up Friction Pro-High Performance

    10,75 €

  • Maple Leaf Macaron Hop Up Rubber 50 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 50 Degree for AEG

    7,42 €

  • Maple Leaf Macaron Hop Up Rubber 60 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 60 Degree for AEG

    7,42 €

  • Maple Leaf Macaron Hop Up Rubber 70 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 70 Degree for AEG

    7,42 €

  • Maple Leaf Macaron Hop Up Rubber 75 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 75 Degree for AEG

    7,42 €

  • Maple Leaf MR Hop Up Rubber for AEG - 50 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 50 Degree (green)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 50 Degree

    8,25 €

  • Maple Leaf MR Hop Up Rubber for AEG - 60 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 60 Degree (yellow)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 60 Degree

    8,25 €

  • Maple Leaf MR Hop Up Rubber for AEG - 70 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 70 Degree (blue)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 70 Degree

    8,25 €

  • Maple Leaf MR Hop Up Rubber for AEG - 75 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 75 Degree (pink)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 75 Degree

    8,25 €

  • Prometheus Air Seal Chamber Hop-Up Packing (Soft Type)

    If your hop-up adjustment is not having a big effect on the hop-up of your BBs, then it probably means that your hop-up packing is worn down and is not gripping the BB properly before it is fired out. A new hop-up packing will allow more accurate hop-up adjustments. Tested and approved by RedWolf. Best used on guns that shoot below 400fps.

    10,75 €
    Prometheus Air Seal Chamber Hop-Up Packing (Soft Type)

    10,75 €

  • Modify Flat Hop Up Bucking baton RYUSOKU - Hard Type

    The Modify BATON RYUSOKU Flat Hop Up Bucking is designed for stabilizing the hop when using 0.25 BBs or more

    • Friendly use
    • Efficiently improves the accuracy.
    • Stabilize and extend the trajectory
    14,08 €
    Modify Flat Hop Up Bucking baton RYUSOKU - Hard Type

    14,08 €

  • Modify Flat Hop Up Bucking baton RYUSOKU - Soft Type

    The Modify BATON RYUSOKU Flat Hop Up Bucking is designed for stabilizing the hop when using 0.2 BBs

    • Friendly use
    • Efficiently improves the accuracy.
    • Stabilize and extend the trajectory
    11,58 €
    Modify Flat Hop Up Bucking baton RYUSOKU - Soft Type

    11,58 €

  • Maple Leaf Super Macaron Hop Up Rubber 50 Degree for AEG

    Maple Leaf Super Macaron is aspecial developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)

    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 50 Degree for AEG

    8,25 €

  • Maple Leaf Super Macaron Hop Up Rubber 60 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 60 Degree for AEG

    8,25 €

  • Maple Leaf Super Macaron Hop Up Rubber 70 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 70 Degree for AEG

    8,25 €

  • Maple Leaf Super Macaron Hop Up Rubber 75 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 75 Degree for AEG

    8,25 €

This part will be assembled and tested with your custom replica

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Lambda 05 precision Barrel 6.05 for AEG / M14 229 mm

    Precision barrel in SUS304 stainless steel compatible with AEG M4 and M14 replicas. These guns are directly manufactured in the Osaka factory in Japan and are of very high quality. All LAMBDA guns are designed on CNC machines.

    • The FIVE range from Lambda is the most precise range in terms of finish with its 1 micron tolerance.
    • The FIVE range from Lambda is similar to the high-end PDI.
    • The internal diameter is 6.05mm
    • The external diameter is 8.55mm

    canon-de-precision-lambda-five-pour-aeg-

    34,08 €
    Lambda 05 precision Barrel 6.05 for AEG / M14 229 mm

    34,08 €

  • PDI Raven 6.01mm Inner Barrel for AEG 229mm

    The CS barrel is a cheaper version of our high end SUS barrels. it Has an inner diameter of 6.01mm+ that give high FPS. The tolerance of the inner diameter has been changed from 0.002mm to 0.007mm compared to the SUS barrel barrel, achieving a lower price. With regards to other dimension tolerances, the CS barrel is of the same high quality as the SUS barrel. Due to the material properties, there are cases which fine wrinkles appear inside, but we have performed test and confirmed that it does not affect the performance. In rare cases, a thin striped pattern can be seen on the inner surface, but this does not affect performance and can be washed off.

    ■Outer diameter: 8.55mm

    ■Inner diameter: 6.01mm+

    ■Tolerance: ±0.007mm

    ■Material: STKM-12C-EC

    24,92 €
    PDI Raven 6.01mm Inner Barrel for AEG 229mm

    24,92 €

  • PDI 6.05 Precision Inner Barrel for AEG 229mm

    Airsoft may be just a game, but the engineers and machinists at PDI definitely don't play around.

    These barrels are cold-hammer forged, which is the same process that real firearm barrels undergo. This process creates a very consistent bore that gives the barrel a tolerance of +0.002mm. This tolerance is currently the highest quality in the entire Airsoft industry for accessible stainless steel barrels. Custom made or lapped stainless barrels can surpass the inner surface of PDI, but those barrels are extremely expensive and are generally not accessible to most consumers.

    The material is SUS304 Stainless Steel. This Steel is harder to cut than most barrels and has superior corrosion resistance. Additionally, PDI barrels are very well known for their straightness and quality control.

    This barrel is 6.05, which is the same diameter as standard AEG barrels. The 6.05 bore is best suited for long range engagements. Through their own research and testing, PDI has found that wider bores give better accuracy over longer distances than tighter bores.

    - Material: Cold Hammer Forged SUS304 Stainless Steel
    - 6.05mm (+0.002mm tolerance)
    - Made in Japan

    44,92 €
    PDI 6.05 Precision Inner Barrel for AEG 229mm

    44,92 €

  • Madbull Stainless Steel 6.03mm precision Barrel (229mm)

    Madbull has crafted their new Stainless Steel 6.03 precision inner barrels. Madbull are known for their high quality, affordability, and dependability, so their Stainless Steel barrel are a highly sought-after internal upgrade. Madbull takes no short cuts in providing an clear cut finished inner barrel for increased precision and the highest standard of durability.

    Features:

    • A Fine stainless steel finish
    • Increased precision
    • Upgrade inner barrel
    • Highest quality
    • Strength and durability

    29,92 €
    Madbull Stainless Steel 6.03mm precision Barrel (229mm)

    29,92 €

  • PDI 6.03 Precision Inner Barrel for AEG 229mm

    The 03 barrel has a tight inner diameter and is a model that emphasizes on FPS. It is a precision stainless steel barrel made by cold forging. Since the inner diameter is slightly wider than the 01 barrel, it is less likely to get jammed with sand, dust and wax compared to 01, and it requires less maintenance. However, do be sure to perform regular maintenance just in case.

    • Outer Diameter：8.55mm
    • Inner Diameter：6.03mm
    • Tolerance：±0.002mm
    • Material：SUS304

    44,92 €
    PDI 6.03 Precision Inner Barrel for AEG 229mm

    44,92 €

  • PDI 6.08 Precision Inner Barrel for AEG 229mm

    Airsoft may be just a game, but the engineers and machinists at PDI definitely don't play around. These barrels are cold-hammer forged, which is the same process that real firearm barrels undergo. This process creates a very consistent bore that gives the barrel a tolerance of +0.002mm. This tolerance is currently the highest quality in the entire Airsoft industry for accessible stainless steel barrels. Custom made or lapped stainless barrels can surpass the inner surface of PDI, but those barrels are extremely expensive and are generally not accessible to most consumers. The material is SUS304 Stainless Steel. This Steel is harder to cut than most barrels and has superior corrosion resistance. Additionally, PDI barrels are very well known for their straightness and quality control. This barrel is 6.08, which is the same diameter as standard AEG barrels. The 6.08 bore is best suited for long range engagements. Through their own research and testing, PDI has found that wider bores give better accuracy over longer distances than tighter bores.

    - Material: Cold Hammer Forged SUS304 Stainless Steel
    - 6.08mm (+0.002mm tolerance)
    - Made in Japan

    41,58 €
    PDI 6.08 Precision Inner Barrel for AEG 229mm

    41,58 €

  • PDI 6.10 Wide Bore Inner Barrel for AEG 229mm

    PDI 6.10mm High Precision Wide Bore Inner Barrel for AEG with a margin of 0.007mm per barrel. Wide bore barrels are known for pushing distance rather than power. Perfect for reaching targets without worrying about them reaching you. Material : carbon steel STKM-12C-EC

    26,58 €
    PDI 6.10 Wide Bore Inner Barrel for AEG 229mm

    26,58 €

Save 15% on HPA tank !

Qiantité totale 0

Vous pouvez ajouter un maximum de 20 quantités

  • Balystik 0.2L 3000psi Alu HPA Tank with HP preset

    Balystik strikes again in the HPA universe and present a new range of high pressure cylinders. This tank is made of aluminum with steel base and will provide all the rigor expected of a reliable, efficient and safe product. The volume of this cylinder is 0,2 liters (13 ci) in with a maximum pressure of 3000psi (200 bar).


    Technical details :

    •      Tank and regulator with Pi certification
    •      Operating pressure: 200 BAR / 3000 PSI max
    •      Output pressure: 800 PSI
    •      5000 PSI mini pressure gauge
    •      Filling valve with filter and Protective cap
    •      Protective cap for ASA threaded outlet

    35,35 €
    Balystik 0.2L 3000psi Alu HPA Tank with HP preset

    41,58 € 35,35 €

  • Balystik 0.8L 3000psi Alu HPA Tank with HP preset

    Balystik strikes again in the HPA universe and present a new range of high pressure cylinders. This tank is made of aluminum with steel base and will provide all the rigor expected of a reliable, efficient and safe product. The volume of this cylinder is 0,8 liters (48 ci) in with a maximum pressure of 3000psi (200 bar).

    Technical details :

    •      Tank and regulator with Pi certification
    •      Operating pressure: 200 BAR / 3000 PSI max
    •      Output pressure: 800 PSI
    •      5000 PSI mini pressure gauge
    •      Filling valve with filter and Protective cap
    •      Protective cap for ASA threaded outlet

    38,89 €
    Balystik 0.8L 3000psi Alu HPA Tank with HP preset

    45,75 € 38,89 €

Remises par quantités

arrow_drop_downRécapitulatif :

Total :

Partagez votre création avec vos amis.

More info

Powair6 si proud to introduce the Cyma CM041 series HPA. Some options are available if you want another HPA system or change some parts like hop-up rubber or trigger. The replica comes with the original 6mm macroline out of the motor grip but you have the possibility to choose our easyconnect system, in this case the male connector will be fitted directly onto the motor grip, no more visible macroline hose, just click & go.

Important note :

  • All AEG spare parts unmounted are delivered with the replica
  • Please do not modify the nozzle and airflow values ​​of the FCU, modify only firing modes.
  • We strongly advice you to use high performance mid-cap spring operated
  • Don't feed your mid cap magazine more than 80% of the maximal capacity
  • We strongly advice you to use high performance BBs such as BLS, Krytac, Madbul,ASG blaster Devil, ASG open Blaster.
  • Never use grease or any silicone on the electric gun, magazine or BBs
  • Be sure to use clean air and check that your air filter is clean if you are using HPA home compressor.
  • 12 month warranty by P6 Workshop, if the product is opened warranty is voided.

The power of the replica depends on the operating pressure that you set on the regulator, it is appropriate for each player to have a speed control system in order to verify that the energy developed by the replica does not exceed the legal limits of your country.  Please note that any modifications or machining may be necessary and that the supplied replica is no longer intended to be reconverted for AEG / Electric operation. The replica does not need any maintenance and disassembly, any opening voids the warranty.

Please note, we advice to use Mp5 mid cap magazine with this HPA set up.

Data sheet

TypeMP5
Caliber6mm Airsoft
MaterialPolymer / Metal
Hop-upAdjustable
Firing modeSelectable
Power sourceHPA
Inner barrel (mm)220
Inner Barrel dia (mm)6.03
Trigger SystemElectronic
Battery ConnectorJST
Power (FPS @ 0.20gr)350

Customization

After saving your customized product, remember to add it to your cart.

loader

* required fields

Accessories

Airsoft gun Law

This airsoft replica is subject to the french Decree No. 99-240 of March 24, 1999, which regulates the law of replica firearms developing an output energy from the muzzle greater than 0.08 joule and equal to or less than 2 joules. This product is intended for recreational use only. By adding this product to your cart, you acknowledge:

  • Being older than 18
  • Master the basic safety rules concerning the use of this type of replica (wearing protective glasses, playing in a suitable and private place, etc.).
  • Never expose the replica in a public place because it can be mistaken for a real weapon with all the disastrous consequences that this implies
  • Being in full knowledge of the airsoft laws in your local country and buying knowingly, Powair6 cannot be responsible in the case of illegal importation.
  • Never point or shoot at a person, animal or any other object representing any danger.
  • Do not aim with your replica until you are ready to shoot at the target you have selected.
  • Do not shoot on a hard surface, risk of the ball bouncing, or in water, which could cause dangerous ricochets.
  • Do not aim the shot at the eyes or ears.
  • Do not use airsoft without wearing goggles or a protective mask.
  • Do not attempt to modify or disassemble the product in order to increase its firing power. It can be dangerous and will void the warranty.
  • Always be sure to keep the safety “ON” when you are no longer using the product.
  • Never look into the barrel, a BB may be hurt your eyes.

P6 Customs

P6 Customs

See all products from P6 Customs

Questions  (1)

A partir de Ioannis | 2022-12-19 12:57:45

Have you changed the nozzle on the inferno gen 2 when installed in the mp5 sd6 high speed ?

Powair6

Hello;
no, the nozzle remains the same.
Best regards.

Page: 1
Seuls les utilisateurs enregistrés peuvent poser une question. Login

Avis

Seuls les clients enregistrés peuvent poster un avis. Connectez-vous ou créez un compte .
Tri:

Aucun avis pour le moment.