> >>>P6 Custom E&L AK series custom AEG
P6 Custom E&L AK series custom AEG - View larger

P6 Custom E&L AK series custom AEG

P6-AEG-ELAK

New product

In stock

Moyenne des votes pour ce produit
0 / 5
Moyenne : 0 / 5
Basée sur 0 avis clients.

Configure

Si vous souhaitez enregistrer votre configuration, vous devez d'abord vous connecter.

Connexion

Customize your product

Choose your replica version. P6 Workshop Team will prepare, customize, adjust and test your custom replica before shipping, a 160€ fees is asked for this service and added to the replica base price.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • E&L AIMS AEG

    E&L Airsoft AKM electric airsoft with steel barrel, steel sights and steel stamped receiver, creating the highest CP value electric AK AEG series ever.

    401,58 €
    E&L AIMS AEG

    401,58 €

  • E&L AIMS ROMANIAN AEG

    E&L Airsoft AKM electric airsoft with steel barrel, steel sights and steel stamped receiver, creating the highest CP value electric AK AEG series ever.

    401,58 €
    E&L AIMS ROMANIAN AEG

    401,58 €

  • E&L AKMS AEG (Cybergun)

    E&L Airsoft AKMS electric airsoft with steel barrel, steel sights and steel stamped receiver, creating the highest CP value electric AK AEG series ever.

    401,58 €
    E&L AKMS AEG (Cybergun)

    401,58 €

Choose your output power, value in FPS with 0.20gr BBs. Please note : FPS may vary, we cannot garantee exact FPS asked, it will be a range. For low power configuration please note that the cylinder can be modified.

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • 270 FPS

    270 FPS

  • 280 FPS

    280 FPS

  • 290 FPS

    290 FPS

  • 300 FPS

    300 FPS

  • 310 FPS

    310 FPS

  • 320 FPS

    320 FPS

  • 330 FPS

    330 FPS

  • 340 FPS

    340 FPS

  • 350 FPS

    350 FPS

  • 360 FPS

    360 FPS

  • 370 FPS

    370 FPS

  • 380 FPS

    380 FPS

  • 390 FPS

    390 FPS

  • 400 FPS

    400 FPS

  • 410 FPS

    410 FPS

  • 420 FPS

    420 FPS

  • 430 FPS

    430 FPS

Choose Your piston. Basically, we advise you to choose the Balystik which is very versatile and resistant, but you can choose another model ! We make AOE modification of the piston + piston head whatever the model chosen in order to allow a perfect start of the cycle between the sector gear and the first piston teeth.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • FPS Softair Full Metal Teeth light Piston

    FPS is proud to present the first lightened piston with 100% Made in Italy technopolymer body and all metal teeth.

    For the material of the piston the POM C was chosen, a technopolymer with high mechanical performances and a very low friction coefficient because it is self lubricating. The rack has been manufactured using MIM (Metal Injection Molding) technology, because this production process guarantees dimensional precision and strength equal to those of solid machining. The rack is presented with the second missing tooth and with the third already lowered by 3 tenths of a millimeter because this configuration predisposes the piston itself for a correct angle of engagement (AOE) and makes it suitable for high speed. The type of metal injected is SAE 4650 which is currently considered the best material on the market for this type of use. The sliding guides are designed to minimize friction and retain the lubricant for a long period of time. The rack seat is decentralized to favor the coupling between the piston teeth and those of the sector gear. The longitudinal reinforcements at the sides of the teeth increase the robustness of the piston and avoid contact of the rack with the inner wall of the cylinder. Special ribs decrease the contact surface between the spring and the internal part of the piston body and consequently also the friction between metal and technopolymer is decreased during contraction and elongation due to the firing cycle.

    100% MADE IN ITALY
    100% COMPATIBLE MARUI

    9,92 €
    FPS Softair Full Metal Teeth light Piston

    9,92 €

  • FPS Softair Full Metal Teeth Piston

    FPS is proud to present the first piston with 100% Made in Italy technopolymer body and all metal teeth.

    For the material of the piston the POM C was chosen, a technopolymer with high mechanical performances and a very low friction coefficient because it is self lubricating. The rack has been manufactured using MIM (Metal Injection Molding) technology, because this production process guarantees dimensional precision and strength equal to those of solid machining. The rack is presented with the second missing tooth and with the third already lowered by 3 tenths of a millimeter because this configuration predisposes the piston itself for a correct angle of engagement (AOE) and makes it suitable for high speed. The type of metal injected is SAE 4650 which is currently considered the best material on the market for this type of use. The sliding guides are designed to minimize friction and retain the lubricant for a long period of time. The rack seat is decentralized to favor the coupling between the piston teeth and those of the sector gear. The longitudinal reinforcements at the sides of the teeth increase the robustness of the piston and avoid contact of the rack with the inner wall of the cylinder. Special ribs decrease the contact surface between the spring and the internal part of the piston body and consequently also the friction between metal and technopolymer is decreased during contraction and elongation due to the firing cycle.

    100% MADE IN ITALY
    100% COMPATIBLE MARUI

    9,92 €
    FPS Softair Full Metal Teeth Piston

    9,92 €

  • FPS Softair ZERO-SHOCK Lightened 14 Teeth Piston

    FPS is proud to present the first ZERO-SHOCK lightened piston with 100% Made in Italy technopolymer body and full metal teeth. This system patented by Fps allows to attenuate the stresses that the rack transmits to the piston body and it makes the assembly enormously more resistant and reliable than a normal piston.

    For the material of the piston was chosen a reinforced technopolymer with added elastomer with high mechanical performances and a very low friction coefficient. The rack has been manufactured using MIM (Metal Injection Molding) technology because this production process guarantees dimensional precision and strength equal to those of solid machining. The rack is presented with the second missing tooth and with the third already lowered by 3 tenths of a millimeter because this configuration predisposes the piston itself for a correct angle of engagement (AOE) and makes it suitable for high speed.


    The type of metal injected is SAE 4650 + HRC38-42 hardening treatment which is currently considered the best material on the market for this type of use. The sliding guides are designed to minimize friction and retain the lubricant for a long period of time. The rack seat is decentralized to favor the coupling between the piston teeth and those of the sector gear. The longitudinal reinforcements at the sides of the teeth increase the robustness of the piston and avoid contact of the rack with the inner wall of the cylinder.

    Special ribs decrease the contact surface between the spring and the internal part of the piston body and consequently also the friction between metal and technopolymer is decreased during contraction and elongation due to the firing cycle.

    100% MADE IN ITALY
    100% COMPATIBLE MARUI

    11,58 €
    FPS Softair ZERO-SHOCK Lightened 14 Teeth Piston

    11,58 €

  • FPS Softair ZERO-SHOCK 14 Teeth Piston

    FPS is proud to present the first ZERO-SHOCK piston with 100% Made in Italy technopolymer body and full metal teeth. This system patented by Fps allows to attenuate the stresses that the rack transmits to the piston body and it makes the assembly enormously more resistant and reliable than a normal piston.

    For the material of the piston was chosen a reinforced technopolymer with added elastomer with high mechanical performances and a very low friction coefficient. The rack has been manufactured using MIM (Metal Injection Molding) technology because this production process guarantees dimensional precision and strength equal to those of solid machining. The rack is presented with the second missing tooth and with the third already lowered by 3 tenths of a millimeter because this configuration predisposes the piston itself for a correct angle of engagement (AOE) and makes it suitable for high speed.


    The type of metal injected is SAE 4650 + HRC38-42 hardening treatment which is currently considered the best material on the market for this type of use. The sliding guides are designed to minimize friction and retain the lubricant for a long period of time. The rack seat is decentralized to favor the coupling between the piston teeth and those of the sector gear. The longitudinal reinforcements at the sides of the teeth increase the robustness of the piston and avoid contact of the rack with the inner wall of the cylinder.

    Special ribs decrease the contact surface between the spring and the internal part of the piston body and consequently also the friction between metal and technopolymer is decreased during contraction and elongation due to the firing cycle.

    100% MADE IN ITALY
    100% COMPATIBLE MARUI

    11,58 €
    FPS Softair ZERO-SHOCK 14 Teeth Piston

    11,58 €

  • SHS 15 steel teeth piston for AEG - Blue

    • High Strength Materials
    • Steel Teeth
    • Multi-Platform Compatibility
    5,75 €
    SHS 15 steel teeth piston for AEG - Blue

    5,75 €

  • SHS 15 steel teeth piston for AEG - Purple

    • High Strength Materials
    • Steel Teeth
    • Multi-Platform Compatibility
    5,75 €
    SHS 15 steel teeth piston for AEG - Purple

    5,75 €

Choose your piston head. Basically, we advise you to choose the Balystik CNC aluminum bearing Piston head model which is very versatile and resistant, but you can choose another model ! We make AOE modification of the piston + piston head whatever the model chosen in order to allow a perfect start of the cycle between the sector gear and the first piston teeth.

  • Balystik CNC aluminum bearing Piston head

    This piston head has 8 ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each piston head is made of CNC aluminium and it is also anodized for smooth surface finish. This is the most advanced version with 11.8gr only, 8 ventilation holes for higher speed and rate of fire, ball-bearing and excellent seal.

    • Essential part for upgrading your Airsoft AEG
    • Made of CNC aluminum with hard anodize
    • Ball bearing system help reduce spring torsion
    • 8 Holes ventilation
    • 11.8gr only
    • Suitable for all configurations from high-speed to high torque set-ups
    • Suitable for standard AEG gearbox Tokyo Marui and clones
    4,92 €
    Balystik CNC aluminum bearing Piston head

    4,92 €

  • SHS Aluminum ventilated piston head 6 holes - red

    Piston head HI-FLOW mounted with a bearing. The piston head has 6 holes allowing perfect replica cycle and a optimal compression of the seal rubber in the cylinder.

    5,83 €
    SHS Aluminum ventilated piston head 6 holes - red

    5,83 €

  • SHS Aluminum ventilated piston head 8 holes - blue

    Piston head HI-FLOW mounted with a bearing. The piston head has 8 holes allowing perfect replica cycle and a optimal compression of the seal rubber in the cylinder.
    5,83 €
    SHS Aluminum ventilated piston head 8 holes - blue

    5,83 €

  • SHS Aluminum ventilated piston head 8 holes - red

    Piston head HI-FLOW mounted with a bearing. The piston head has 8 holes allowing perfect replica cycle and a optimal compression of the seal rubber in the cylinder.
    5,83 €
    SHS Aluminum ventilated piston head 8 holes - red

    5,83 €

  • FPS Softair POM piston head for high rof and silence (TPAVP)

    POM piston head designed for high rof and to increase the silence of the replica thanks to the very small knocking surface (TPAVP). It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second. Its adoption lightens the weight of the piston and piston head with a significant reduction in mechanical stress and noise. The particular conformation of the striking part (conical degrading towards the center) ensures that the ventilation holes are never closed by the rubber of the cylinder head, without however leaving too much air between the cylinder head and piston head. All this ensures a perfect anti-vacuum system without ever producing power losses. For preparations of replicas with extreme rates our technical team recommends the use of the washer to lighten the beating mass.

    100% COMPATIBLE MARUI
    100% MADE IN ITALY

    8,25 €
    FPS Softair POM piston head for high rof and silence (TPAVP)

    8,25 €

  • FPS Softair POM piston head for high rof and silence (XPAVP)

    POM piston head designed for high rof and to increase the silence of the replica thanks to the very small knocking surface (XPAVP). It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second. Its adoption lightens the weight of the piston and piston head with a significant reduction in mechanical stress and noise. The particular conformation of the striking part (conical degrading towards the center) ensures that the ventilation holes are never closed by the rubber of the cylinder head, without however leaving too much air between the cylinder head and piston head. All this ensures a perfect anti-vacuum system without ever producing power losses. For preparations of replicas with extreme rates our technical team recommends the use of the washer to lighten the beating mass.

    Technical specifications:

    Weight: 5.56 grams (with technopolymer washer)

    100% COMPATIBLE MARUI
    100% MADE IN ITALY

    9,08 €
    FPS Softair POM piston head for high rof and silence (XPAVP)

    9,08 €

  • FPS Softair double o-ring ball bearing AEG Piston Head

    FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head (TPGE).

    The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each FPS piston head is made of ergal and it is also anodized for smooth surface finish. This is the most advanced version with 6 ventilation holes. This piston head is the most traditional of our production and improves the performance of your aeg, double o-ring and ball-bearing. The piston head is constructed out of CNC ERGAL for durability and precision.
    This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.
    Compatibility :

    Version 2, Version 3, Version 6, Version 7 ( M4, M16, MP5, AK, G36, M14, P90, SIG,STEYR AUG etc ...).

    Compatible with the following brands :

    TOKYO MARUI, G&G, VFC, ICS, KWA, H&K, JING GONG, CYMA, SRC, UMAREX, CLASSIC ARMY, ECHO 1 etc...


    Weight: 11.9 grams
    100% MARUI COMPATIBLE
    100% MADE IN ITALY
    9,92 €
    FPS Softair double o-ring ball bearing AEG Piston Head

    9,92 €

  • FPS Softair double o-ring ball bearing light Piston Head

    FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head (TPPE).

    The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each FPS piston head is made of ergal and it is also anodized for smooth surface finish. This is the most advanced version with 8 ventilation holes for higher speed and rate of fire, double o-ring and ball-bearing. The piston head is constructed out of CNC ERGAL for durability and precision.

    This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    Compatibility :

    Version 2, Version 3, Version 6, Version 7 ( M4, M16, MP5, AK, G36, M14, P90, SIG,STEYR AUG etc ...).

    Compatible with the following brands :

    TOKYO MARUI, G&G, VFC, ICS, KWA, H&K, JING GONG, CYMA, SRC, UMAREX, CLASSIC ARMY, ECHO 1 etc...

    Weight: 11.3 grams
    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    9,92 €
    FPS Softair double o-ring ball bearing light Piston Head

    9,92 €

  • FPS Softair double o-ring ball bearing high speed Piston Head

    FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head Advanced Type (TPAVN).

    The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder.  This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each FPS piston head is made of ergal and it is also anodized for smooth surface finish. This is the most advanced version with 8 ventilation holes for higher speed and rate of fire, double o-ring and ball-bearing. The piston head is constructed out of CNC ERGAL for durability and precision.

    This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    Compatibility :

    Version 2, Version 3, Version 6, Version 7 ( M4, M16, MP5, AK, G36, M14, P90, SIG,STEYR AUG etc ...).

    Compatible with the following brands :

    TOKYO MARUI, G&G, VFC, ICS, KWA, H&K, JING GONG, CYMA, SRC, UMAREX, CLASSIC ARMY, ECHO 1 etc...

    Weight: 11.2 grams

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    10,75 €
    FPS Softair double o-ring ball bearing high speed Piston Head

    10,75 €

  • FPS Softair ball bearing Piston Head with X-RING

    FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head (XPGE).

    XPGE new version with X-RING and one piece plastic shim for AOE. The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each FPS piston head is made of ergal and it is also anodized for smooth surface finish. This is the most advanced version with 6 ventilation holes. This piston head is the most traditional of our production and improves the performance of your aeg, double o-ring and ball-bearing. The piston head is constructed out of CNC ERGAL for durability and precision. This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    Compatibility :
    Version 2, Version 3, Version 6, Version 7 ( M4, M16, MP5, AK, G36, M14, P90, SIG,STEYR AUG etc ...).

    Compatible with the following brands :
    TOKYO MARUI, G&G, VFC, ICS, KWA, H&K, JING GONG, CYMA, SRC, UMAREX, CLASSIC ARMY, ECHO 1 etc...

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    10,75 €
    FPS Softair ball bearing Piston Head with X-RING

    10,75 €

  • FPS Softair double o-ring ball bearing Piston Head X-RING

    FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head (XPPE).

    New version whith X-RING and one piece plastic shim for AOE. The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each FPS piston head is made of ergal and it is also anodized for smooth surface finish. This is the most advanced version with 8 ventilation holes for higher speed and rate of fire, double o-ring and ball-bearing. The piston head is constructed out of CNC ERGAL for durability and precision. This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas. 

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    10,75 €
    FPS Softair double o-ring ball bearing Piston Head X-RING

    10,75 €

  • FPS Softair POM double o-ring ball bearing AEG Piston Head

    FPS CNC POM Double O-Ring Ball Bearing AEG Piston Head (TPPD).

    The FPS POM piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. This is the most advanced version with 6 ventilation holes. This piston head is the ligthest of our piston heads and improves the performance of your aeg, double o-ring and ball-bearing. This piston head is constructed out of CNC POM for durability and precision.

    This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    Weight: 8,7 grams

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    10,75 €
    FPS Softair POM double o-ring ball bearing AEG Piston Head

    10,75 €

  • FPS Softair ball bearing POM Piston Head with X-RING

    FPS CNC POM Double O-Ring Ball Bearing AEG Piston Head (XPPD).

    XPPD new version with X-RING and one piece plastic shim for AOE. The FPS POM piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. This is the most advanced version with 6 ventilation holes. This piston head is the ligthest of our piston heads and improves the performance of your aeg, double o-ring and ball-bearing. This piston head is constructed out of CNC POM for durability and precision. This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    Compatibility :
    Version 2, Version 3, Version 6, Version 7 ( M4, M16, MP5, AK, G36, M14, P90, SIG,STEYR AUG etc ...).

    Compatible with the following brands :
    TOKYO MARUI, G&G, VFC, ICS, KWA, H&K, JING GONG, CYMA, SRC, UMAREX, CLASSIC ARMY, ECHO 1 etc...

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    11,58 €
    FPS Softair ball bearing POM Piston Head with X-RING

    11,58 €

  • FPS Softair CNC Ball Bearing Piston Head Pressure Deviation (TPAE)

    The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    11,58 €
    FPS Softair CNC Ball Bearing Piston Head Pressure Deviation (TPAE)

    11,58 €

  • FPS Softair ball bearing POM Piston Head double oring and adjustable AOE

    CNC POM Double O-Ring Ball Bearing AEG Piston Head with adjustable AOE (TPPA)

    The FPS POM piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. This piston head allows to adjust the length of the piston of 1-2-3 or 4 mm, and it can also be used without shims. Find a perfect AOE improves the reliability of your gun. This piston head is one of the most ligthest of our production and improves the performance of your aeg, double o-ring and ball-bearing. The piston head is constructed out of CNC POM for durability and precision. This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    12,42 €
    FPS Softair ball bearing POM Piston Head double oring and adjustable AOE

    12,42 €

  • FPS Softair ball bearing POM Piston Head for high speed ROF

    POM piston head designed for high rof and to increase the silence of the replica thanks to the very small knocking surface (TPNS). It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second. Its adoption lightens the weight of the piston and piston head with a significant reduction in mechanical stress and noise. The particular conformation of the striking part (conical degrading towards the center with different angles) ensures that the ventilation holes are never closed by the rubber of the cylinder head, without however leaving too much air between the cylinder head and piston head. All this ensures a perfect anti-vacuum system without ever producing power losses. This piston head was developed thanks to the experience of Nico Saccocci of NikkSakk.Extreme.Airsoftcustom.


    The product is supplied with a metallic bearing and washer in orange-colored technopolymer. For preparations of replicas with extreme rates our technical team recommends the use of the washer to lighten the beating mass.
    Technical specifications:

    Weight: 8.3 grams (with metal pad)
    Weight: 5.5 grams (with technopolymer washer)

    100% COMPATIBLE MARUI
    100% MADE IN ITALY

    12,42 €
    FPS Softair ball bearing POM Piston Head for high speed ROF

    12,42 €

  • FPS Softair ball bearing POM Piston Head X-RING and adjustable AOE

    CNC POM Double O-Ring Ball Bearing AEG Piston Head with adjustable AOE (XPPA), new version with X-RING technology.

    The FPS POM piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. This piston head allows to adjust the length of the piston of 1-2-3 or 4 mm, and it can also be used without shims. Find a perfect AOE improves the reliability of your gun. This piston head is one of the most ligthest of our production and improves the performance of your aeg, double o-ring and ball-bearing. The piston head is constructed out of CNC POM for durability and precision. This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    13,25 €
    FPS Softair ball bearing POM Piston Head X-RING and adjustable AOE

    13,25 €

  • GATE CNC HIGH SPEED Piston Head

    The piston head designed for the most demanding DSG and speed builds, helping achieve the best results and overcome limits. Thanks to the use of 10 vents, airflow significantly increases improving sealing. The ultra-lightweight POM material together with CNC machining ensures repeatability of shots, perfect head-to-cylinder seal, high RPS ratio, and eliminates FPS drops. The adjustable AOE makes it essential for every speed build. 

    Features:

    • Designed especially for most demanding DSG and speed builds
    • 10 vents enhancing airflow and sealing
    • Ultra-lightweight POM material
    • CNC machining
    • Perfect head-to-cylinder seal
    • AOE spacer included
    • No AEG modification required
    • Dedicated especially to pros and skilled users
    • Piston head weight 2.7 g (without bearing)

    Compatibility:

    • Ideal for max M140 spring power
    • All standard AEG cylinders
    • All standard AEG cylinder heads
    • All standard AEG pistons
    • O-rings 19x2.4 mm

    Kit contents:

    • HIGH SPEED Piston Head – POM
    • AOE spacer
    • 1 bearing
    • 2 installation screws
    • 2 o-rings
    • QR Code containing quickstart guide
    14,08 €
    GATE CNC HIGH SPEED Piston Head

    14,08 €

  • Maxx Model CNC Aluminum Double O-Ring Ball Bearing AEG Piston Head

    14,99 €
    Maxx Model CNC Aluminum Double O-Ring Ball Bearing AEG Piston Head

    14,99 €

  • FPS Softair technopolymer / Carbon fiber piston head Xring

    Xring Carbon fiber reinforced technopolymer piston head designed for high rof and to increase the silence of the aeg (XPAVPCF) It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second. Its adoption lightens the weight of the piston and piston head with a significant reduction in mechanical stress and noise. The particular conformation of the striking part (conical degrading towards the center) ensures that the ventilation holes are never closed by the rubber of the cylinder head, without however leaving too much air between the cylinder head and piston head. All this ensures a perfect anti-vacuum system without ever producing power losses. For preparations of replicas with extreme rates our technical team recommends the use of the washer to lighten the beating mass. Supplied with VITON Xring for maximum smoothness and chemical resistance to lubricants.

    10,67 €
    FPS Softair technopolymer / Carbon fiber piston head Xring

    10,67 €

  • FPS Softair POM / Carbon fiber piston head

    Carbon fiber reinforced pom piston head designed for high rof and to increase the silence of the aeg (TPAVPCF) It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second. Its adoption lightens the weight of the piston and piston head with a significant reduction in mechanical stress and noise. The particular conformation of the striking part (conical degrading towards the center) ensures that the ventilation holes are never closed by the rubber of the cylinder head, without however leaving too much air between the cylinder head and piston head. All this ensures a perfect anti-vacuum system without ever producing power losses. For preparations of replicas with extreme rates our technical team recommends the use of the washer to lighten the beating mass. Supplied with VITON oring for maximum smoothness and chemical resistance to lubricants

    100% COMPATIBLE MARUI
    100% MADE IN ITALY

    9,83 €
    FPS Softair POM / Carbon fiber piston head

    9,83 €

Choose your mosfet

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Perun V3 HYBRID mosfet

    Perun V3 Hybrid replaces mechanical contacts in your airsoft replica or gel blaster and provides lots of useful features. Optical and magnetic sensors allow to eliminate many moving parts that are prone to damage, thus increasing the reliability. Adaptive trigger control allows switching from a very short trigger travel to a long one even in the field, with almost any trigger, including stock ones. Works without the need for any modification with most V3 gearboxes in Tokyo Marui standard. For details and exceptions please refer to the manual.

    Adjustable trigger sensitivity – The trigger can be set to 5 sensitivity levels, ranging from very short pull needed to fire a shot, to a very long one. No modification to the trigger or the gearbox is needed and the trigger sensitivity change is possible even in the field.

    Independently programmed firing modes - Program the firing modes any way you like, setting safe, semi, burst or auto on both selector positions.

    Active brake - active brake stops the motor after each shot preventing spring compression or in case of replicas with high rate of fire, overspin (double shot problem).

    Precocking - Fast trigger response can be a matter of victory or defeat, especially in CQB situations. With precocking enabled, piston will remain in rear position after each shot with the spring already compressed, ensuring that next shot will be fired immediately after you pull the trigger. To release the spring after using precocking, pull the trigger and hold it for 2 seconds, after which a second shot will be fired, this time with no precocking and fully braked.

    2-stage trigger – Light trigger pull results with a single shot or burst, while a deeper pull will cause a burst or fully automatic fire. Following modes are available: semi – burst, semi – auto and burst – auto.

    Binary trigger - Allows for easy double shots in semi-automatic setting. After enabling this mode, if semi-automatic fire is set, shots will be fired not only when the trigger is pulled, but also when it is released.

    Rate of fire reduction - Reduce the rate of fire in automatic or burst fire to save ammo or make the replica shoot in a more realistic fashion.

    DMR mode - Introduces intervals between semiautomatic shots to comply with DMR rules on some fields.

    Low battery voltage alarm - Dedicated for Li-Po and Li-Ion batteries. Should the battery voltage fall to a dangerously low level, user will be notified by short sound signals that are repeated every minute. This may also be freely switched on and off.

    DSG – a sector gear detection mode specially prepared to work with dual sector gears.

    Diagnostic system - Constantly monitors the replica and the mosfet itself. In case of any problems, immediately lets you know what it might be, making troubleshooting much easier.

    Electronic fuse - Will save your replica and battery in case of a major malfunction. It will automatically disconnect the battery when a short circuit or blocked motor is detected.

    Programming of all the settings is done solely by using quick and easily memorable sequences of fire selector switching and trigger pulls supported by sound signals and multicolor LED diode. That allows changing the settings in any moment, in a matter of seconds, even under enemy fire. All settings are set independently for each selector position, so you can program the mosfet exactly the way you want, for example semi on semi and binary trigger on auto.
    Perun V3 Hybrid works without problems with any battery from 7V do 17V. It can also be used with most extreme setups.

    62,42 €
    Perun V3 HYBRID mosfet

    62,42 €

  • JEFFTRON Leviathan Mosfet V3 Optical

    The Leviathan - V3 is one of the most advanced ETU (electronic trigger unit) on the market. It has all optical sensors for better handling and durability. Build-in wireless communication for quick setup using iOS or Android smartphones!

    Foam on the trigger makes great hair trigger modefoam_hair_trigger

    63920.jpg?time=1619013333401

    Real feel trigger system (RFTS), spring simulates trigger resistance like in the real AK74. It adds secondary resistance with release after the fire. RFTS was designed by professional gunsmith for more realistic feel from shooting

    RFTS_springRFTS_inside

    • External input port and output pads serves for custom accessories
    • Real time response for change settings -> immediately test result
    • Easy installation into the gearbox instead of the original trigger contacts
    • Completely made wiring allows the fastest and the easiest installation into the gun. No soldering is needed
    • New functions are for free for every user via online update
    • The Leviathan - V3 brings endless possibilities for your gun!

    2YEARS_WARRANTY

     Leviathan – V3 supports these airsoft guns:

    • AK47, AK74, Galil, Bizon with V3 gearbox according to TM design
    • Tokyo Marui AK47 Next Generation
    • G36, XM8 with V3 gearbox according to TM design
    • Tokyo Marui G36 Next Generation
    • ASG CZ 805 BREN
    • AUG, UAR with V3 gearbox according to TM design
    • Fal/SA58 with V3 gearbox according to TM design
    • MP5K, UMP with V3 gearbox according to TM design
    • SIG 55X with V3 gearbox according to TM design
    • S&T VSS or VAL

     63932.jpg?time=1619013410917

    SAFETY WARNING :


    - Installation of this device into the gearbox requires advanced technician skills!
    - Please read these informations before installing your device to prevent any damage.
    - Short circuit or incorrectly connected battery will cause immediate damage to the device which is not covered by the warranty. It can lead to fire or even battery explosion.
    - Disconnect battery, when you aren't using the gun! Otherwise you will fully discharge the battery. Because the device drains small amount of current from the bettery all the time.
    - Do not connect battery when gun pointing towards you, another person or an animal.
    - Do not modify, repair and put into any kind of liquids or thermal shock the Leviathan - V3.

    83,25 €
    JEFFTRON Leviathan Mosfet V3 Optical

    83,25 €

Choose you nozzle. We have already selected the right model and the best brands for you. Remember that the nozzle material (aluminium or polymer) is not important compare to the shape, seal effect and smooth slide on the cylinder head. All the nozzle above include oring seal.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Maxx Model CNC Aluminum Double O-Ring Nozzle (20.75mm)

    9,08 €
    Maxx Model CNC Aluminum Double O-Ring Nozzle (20.75mm)

    9,08 €

This part will be assembled and tested with your custom replica

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Prometheus Air Seal Chamber Hop-Up Packing (Soft Type)

    If your hop-up adjustment is not having a big effect on the hop-up of your BBs, then it probably means that your hop-up packing is worn down and is not gripping the BB properly before it is fired out. A new hop-up packing will allow more accurate hop-up adjustments. Tested and approved by RedWolf. Best used on guns that shoot below 400fps.

    10,75 €
    Prometheus Air Seal Chamber Hop-Up Packing (Soft Type)

    10,75 €

This part will be assembled and tested with your custom replica

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Option No.1 Motor Brushless Hi-torque short plug-in

    The OptionNo.1 brand unveilsa brand new Hi-torque axe short Brushless motor that will allow you to upgrade your AEG replica. The special features of the Brushless motor allow you to benefit from impressive performance while reducing electrical consumption and removing the constraints of a conventional carbon motor.

    This motor is suitable for all mosfets! * see table below

    option-no1-moteur-brushless-hi-torque-lo

    • Increased response time compared to a conventional engine
    • Power consumption down
    • Operation by magnetic field
    • No motor brushes
    • Heats much less than a conventional engine
    • More torque
    • No mechanical and electrical loss
    • High performance
    • Plug-in design simple to install
    • 7.4V 31000 rpm LiPo battery
    • LiPo 11.1v 46000 rpm battery
    • Low voltage protection
    • Overheating protection
    • 100 Protection temperature protection
    108,25 €
    Option No.1 Motor Brushless Hi-torque short plug-in

    108,25 €

  • Guarder Infinite Torque-Up motor - Short Type

    Guarder Infinite Torque-Up Type Motor :

    Two Ball Bearing Bushing Inside
    Guarder Motor Pinion Gear (Thermal Treatment)

    40,75 €
    Guarder Infinite Torque-Up motor - Short Type

    40,75 €

  • Nimrod NT Blackbird 20K CNC Motor Short axis

    The Blackbird 20K series is built with solid materials and is suitable for every setup. Due to the high TPA (Turns Per Armature) it can easily pull up all of springs available for AEGs. Our magnets can withstand high temperatures up to 150°C and the armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears.

    • U/min @ 11.1V: 20000
    • TPA: 26
    • Pinion Gear Shape: D-Shape

    We do recommend using it in the following setups

    • Gearset : 18:1 / 16:1 / 13:1 / 12:1
    • Springs : all
    56,58 €
    Nimrod NT Blackbird 20K CNC Motor Short axis

    56,58 €

  • Nimrod NT Blackbird 26K CNC Motor Short axis

    The Blackbird 26K series is built with solid materials and is suitable for nearly every setup. Due to the high TPA (Turns Per Armature) it can easily pull up all kinds of springs available for AEGs. Our magnets can withstand high temperatures up to 150°C and the armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears.

    • U/min @ 11.1V: 26000
    • TPA: 19
    • Pinion Gear Shape: D-Shape

    We do recommend using it in the following setups

    • Gearset : 32:1 / 18:1 / 16:1 / 13:1 / 12:1
    • Springs : M110+
    56,58 €
    Nimrod NT Blackbird 26K CNC Motor Short axis

    56,58 €

  • Nimrod NT Blackbird 30K CNC Motor Short axis

    The Blackbird 30K series is built with solid materials and is suitable for nearly every setup. Due to the high TPA (Turns Per Armature) it can easily pull up most of of springs available for AEGs. Our magnets can withstand high temperatures up to 150°C and the armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears.

    • U/min @ 11.1V: 30000
    • TPA: 16
    • Pinion Gear Shape: D-Shape

    We do recommend using it in the following setups

    • Gearset : 32:1 / 18:1 / 16:1 / 13:1
    • Springs : M100-M150
    58,25 €
    Nimrod NT Blackbird 30K CNC Motor Short axis

    58,25 €

  • Nimrod NT Blackbird 39K CNC Motor Short axis

    The Blackbird 39K series is built with solid materials and is suitable for nearly every setup. Due to the high rpm, it also can be used in short stroked 0.5 Joules or under 1 Joule builds. Take care of the spring and sector gear management to prevent a pre interlocking which will cause a broken piston or sector gear. Our magnets can withstand high temperatures up to 150°C and the armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears.

    • U/min @ 11.1V: 39000
    • TPA: 14
    • Pinion Gear Shape: D-Shape

    We do recommend using it in the following setups

    • Gearset : 32:1 / 18:1 / 16:1
    • Springs : M100 to M140
    56,58 €
    Nimrod NT Blackbird 39K CNC Motor Short axis

    56,58 €

  • Nimrod NT Blackbird 45K CNC Motor Short axis

    The Blackbird 45K series is built with solid materials and is suitable for nearly every setup. Due to the high rpm, it also can be used in short stroked 0.5 Joules or under 1 Joule builds. Take care of the spring and sector gear management to prevent a pre interlocking which will cause a broken piston or sector gear. Our magnets can withstand high temperatures up to 150°C and the armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears.

    • U/min @ 11.1V: 45000
    • TPA: 11
    • Pinion Gear Shape: D-Shape

    We do recommend using it in the following setups

    • Gearset : 32:1 / 18:1
    • Springs : M100 to M130
    56,58 €
    Nimrod NT Blackbird 45K CNC Motor Short axis

    56,58 €

  • Nimrod NT Blackbird 36K/27K CNC Brushless Motor short

    The Nimrod Tactical Brushless motor has 2 adjustable speed settings. Depending on the battery being used, either 27000 rpm or 36000 rpm can be set. Same as with the regular Nimrod motors, a D-shape pinion gear is used. Thus the power transmission is better and the change of the bevel gear is easier. The motor should only be used in conjunction with strong batteries. The C rating must necessarily be above 40 / 60. Also, the battery should have a high capacity (1400 mAh or more) to operate smoothly. The motor has been successfully tested with a variety of mosfets available on the market and it can be reported that all tested combinations worked well together.

    Please note that some Mosfet manufacturers cannot guarantee that operation with a brushless motor is possible. In this regard, always refer to the Mosfet manufacturer’s specifications. To ensure a trouble-free installation, the pinion to bevel gear position must be considered. Some grips and motor covers need to be modified to allow a perfect fit of the motor.

    149,92 €
    Nimrod NT Blackbird 36K/27K CNC Brushless Motor short

    149,92 €

  • SHS high torque motor short axis

    The SHS high-torque motor is an affordable, high quality AEG motor that has been enhanced for high torque output. Well known from every gunsmith for several years, it is an essential base for upgrading your replica, especially since its price / performance ratio is unbeatable.

    Features :

    • Steel pinion gear
    • Neodym magnets
    • 16 TPA
    • Excellent ROF and responsiveness
    • Short axis version
    29,08 €
    SHS high torque motor short axis

    29,08 €

  • G&G Talaria 40K Motor Short Axis

    • High-Performance Motor
    • Compatible to up to 12v Batteries
    • Designed for AEG
    • Shaft : short
    • Magnets: Neodymium
    • Maximum speed: 40000rpm
    66,66 €
    G&G Talaria 40K Motor Short Axis

    66,66 €

  • Warhead BASE Brushless motor 27K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    Die-cast aluminum housing
    Totally customized design with maximum power and torque
    High temperature resistant copper winding by PLC
    SH quality magnets
    Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    High quality "D" insert for motor gear
    Compatibility: AEG using short axis motors
    Information: 27,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    120,75 €
    Warhead BASE Brushless motor 27K short axis

    120,75 €

  • Warhead BASE Brushless motor 35K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    Die-cast aluminum housing
    Totally customized design with maximum power and torque
    High temperature resistant copper winding by PLC
    SH quality magnets
    Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    High quality "D" insert for motor gear
    Compatibility: AEG using short axis motors
    Information: 35,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    124,92 €
    Warhead BASE Brushless motor 35K short axis

    124,92 €

  • Warhead Motor Brushless HIGH speed 36K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    • High quality 7075 aluminum housing
    • Totally customized design with maximum power and torque
    • High temperature resistant quality copper winding
    • High quality magnets
    • Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    • High precision CNC design
    • High quality "D" insert for motor gear
    • Compatibility: AEG using short axis motors

    Information: 25,000 rpm in 7.4 v Lipo - 36,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    155,75 €
    Warhead Motor Brushless HIGH speed 36K short axis

    155,75 €

  • Warhead BASE Brushless motor 45K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    Die-cast aluminum housing
    Totally customized design with maximum power and torque
    High temperature resistant copper winding by PLC
    SH quality magnets
    Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    High quality "D" insert for motor gear
    Compatibility: AEG using short axis motors
    Information: 45,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    124,92 €
    Warhead BASE Brushless motor 45K short axis

    124,92 €

  • Warhead Motor Brushless ULTRAHIGH speed 52K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    • High quality 7075 aluminum housing
    • Totally customized design with maximum power and torque
    • High temperature resistant quality copper winding
    • High quality magnets
    • Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    • High precision CNC design
    • High quality "D" insert for motor gear
    • Compatibility: AEG using short axis motors

    Information: 35,000 rpm in 7.4 v Lipo - 52,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    149,92 €
    Warhead Motor Brushless ULTRAHIGH speed 52K short axis

    149,92 €

This part will be assembled and tested with your custom replica

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Madbull Stainless Steel 6.03mm precision Barrel (455mm)

    Madbull has crafted their new Stainless Steel 6.03 precision inner barrels. Madbull are known for their high quality, affordability, and dependability, so their Stainless Steel barrel are a highly sought-after internal upgrade. Madbull takes no short cuts in providing an clear cut finished inner barrel for increased precision and the highest standard of durability.

    Features:

    • A Fine stainless steel finish
    • Increased precision
    • Upgrade inner barrel
    • Highest quality
    • Strength and durability

    30,75 €
    Madbull Stainless Steel 6.03mm precision Barrel (455mm)

    30,75 €

  • Lambda 05 precision Barrel 6.05 for AEG / M14 455mm

    Precision barrel in SUS304 stainless steel compatible with AEG M4 and M14 replicas. These guns are directly manufactured in the Osaka factory in Japan and are of very high quality. All LAMBDA guns are designed on CNC machines.

    • The FIVE range from Lambda is the most precise range in terms of finish with its 1 micron tolerance.
    • The FIVE range from Lambda is similar to the high-end PDI.
    • The internal diameter is 6.05mm
    • The external diameter is 8.55mm

    canon-de-precision-lambda-five-pour-aeg-

    46,58 €
    Lambda 05 precision Barrel 6.05 for AEG / M14 455mm

    46,58 €

  • Lambda SMART08 precision Barrel 6.08 for M4 AEG & M14 455mm

    • The SMART range from Lambda is the same as PDI raven (without oxyd black finish)
    • Suitable for AEG & M14
    • The internal diameter is 6.08mm
    • The external diameter is 8.55mm

    canon-de-precision-lambda-five-pour-aeg-

    26,58 €
    Lambda SMART08 precision Barrel 6.08 for M4 AEG & M14 455mm

    26,58 €

  • PDI 6.05 Precision Inner Barrel AEG 455mm

    Airsoft may be just a game, but the engineers and machinists at PDI definitely don't play around.

    These barrels are cold-hammer forged, which is the same process that real firearm barrels undergo. This process creates a very consistent bore that gives the barrel a tolerance of +0.002mm. This tolerance is currently the highest quality in the entire Airsoft industry for accessible stainless steel barrels. Custom made or lapped stainless barrels can surpass the inner surface of PDI, but those barrels are extremely expensive and are generally not accessible to most consumers.

    The material is SUS304 Stainless Steel. This Steel is harder to cut than most barrels and has superior corrosion resistance. Additionally, PDI barrels are very well known for their straightness and quality control.

    This barrel is 6.05, which is the same diameter as standard AEG barrels. The 6.05 bore is best suited for long range engagements. Through their own research and testing, PDI has found that wider bores give better accuracy over longer distances than tighter bores.

    - Material: Cold Hammer Forged SUS304 Stainless Steel
    - 6.05mm (+0.002mm tolerance)
    - Made in Japan

    79,08 €
    PDI 6.05 Precision Inner Barrel AEG 455mm

    79,08 €

  • Action Army AAC 6.03mm precision Barrel for AEG / GBB 455mm

    Copper + Surface treatment precision barrel suitable for AEG / GBB

    22,42 €
    Action Army AAC 6.03mm precision Barrel for AEG / GBB 455mm

    22,42 €

  • Balystik DBS 6.03mm precision barrel for AEG (455mm)

    - DBS (depression barrel system) : Air pressure escape between outer & inner barrel before the BB exits.

    - Internal Diameter : 6.03mm (+/- 0.005)

    - External Diameter : 8.55mm

    - Lenght : 455mm

    Made of Stainless Steel

    33,27 €

    Remises par quantités

    QuantityPrixÉconomie
    1 26,62 € au moins 6,65 €
    Balystik DBS 6.03mm precision barrel for AEG (455mm)

    33,27 €

arrow_drop_downRécapitulatif :

Total :

Partagez votre création avec vos amis.

More info

Powair6 si proud to introduce the E&L AK series with gearbox upgrade. With many years of experience, our team now offers fully upgraded AEGs. The airsoft gun are unmounted, improved and reinforced, we change only the necessary by selecting reinforced parts that will give longevity and performance. Thanks to a precise timing of the gears, high performance mosfet and a strong full teeth piston it is possible to play safe & reliable for a very long time.

This model already include good parts like the one piece cylinder / cylinder head and CNC 18:1 gearset so we have kept them in the final configuration. We install high performance mosfet, CNC nozzle, full teeth piston, upgraded piston head and of course rework everything to make a smooth and reliable gearbox. The moteur is also working fine so we advice to keep it.

Workshop preparation :

  • Open the gearbox, take off everything inside, cleaning & degreasing shells
  • Adjusting the CNC gears with inox shims only, one by one
  • Short stroke of the piston and sector gear
  • Angle of engagement optimisation (AOE) for piston and cylinder bumper
  • Installation of the new mosfet with software update and programming
  • Milling the monobloc cylinder to change air volum
  • Change the piston head oring by a custom one to match E&L special size.
  • Greasing mecanic & pneumatic parts
Important note :
  • 12 month warranty by P6 Workshop
  • Time to build 1-4 days before shipping
  • We recommend 11.1v lipo battery
  • We strongly advice you to use high performance mid-cap spring operated magazine such as PTS EPM ou HEXMAG
  • Don't feed your mid cap magazine more than 80% of the maximal capacity
  • We strongly advice you to use high performance BBs such as BLS, Krytac, Madbull ASG blaster Devil or open Blaster.
  • NEVER use any grease or silicone on the electric gun, magazine, hop-up inner barrel or BBs
  • Any opening by a third party other than Powair6 voids the warranty on the replica.

Data sheet

TypeAK
Caliber6mm Airsoft
Weight3700gr
MaterialMetal and wood
Main colorBlack
Hop-upAdjustable
Firing modeSemi + Full automatic
Power sourceElectric
Inner barrel (mm)455
Inner Barrel dia (mm)6.03
GearboxV3
Gearbox inserts9mm Bearings
Gear ratio18:1 Torque
Quick change spring GearboxYes
Integrated MosfetLeviathan
Trigger SystemElectronic
Motor versionShort axis
Magazine VersionMid-cap Spring operated
Magazine capacity120
BatteryNot Included
Battery chargerNot Included
Battery ConnectorDEAN (T-Plug)
Power (FPS @ 0.20gr)Selectable

Customization

After saving your customized product, remember to add it to your cart.

loader

* required fields

Accessories

Mosfet

Here is a sum-up list of the available mosfets for our custom AEG airsoft guns. Note that you may see or not see this options following the Custom replica.

Important note : With a high performance mosfet configuration, for each shot fired the motor is instantly launched and instantly stopped, wich mean the more you shoot fast with a lot of quantity shot in few timing, the motor is heating accordingly, this is normal, but too much is not advised. Our products are made to get a very responsive semi automatic and make short full auto. If you wish to fire a lot of BBs in during a short timing (speedQB, Machine gun), we strongly advice to get HPA system more suitable.

The best for those who prefer simplicity but require highest quality. Economic version with limited number of functions. If you will decide to have more functions, there is always option to upgrade firmware from BASIC to ADVANCED. In order to upgrade your TITAN firmware from BASIC to ADVANCED, you need to purchase the upgrade Economic version with limited number of functions.

 VIDEO

TITAN V2 Advanced Set is an AEG Control System for V2 gearboxes which will transform your airsoft gun into an advanced training weapon. Adjust your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices. TITAN V2 enables you to adjust the trigger sensitivity with military precision. The innovative proximity trigger sensor offers you even 250 possible sensitivity settings. Gain a tactical advantage thanks to the extremely fast trigger response and many other useful functions.

 VIDEO

Leviathan - V2 is processor controlled mosfet with Bluetooth communication. It adds new shooting modes, controls RoF, pre-cocking, active braking, low battery indication, statistics... Everything is controlled via application in the smart phone (iOS and Android). Device is fully integrated inside the gearbox version 2 instead of the original trigger contacts. Comes with completely made wires to stock with 30A mini fuse and deanT connector - no soldering needed.

VIDEO 

This option feature a modified Gate TITAN module combined with ICFU System (Integrated Custom Firestop Upgrade) : the system makes stop firing the replica when there is no BB left in the magazine, just like a PTW !

  • Stop BBs when magazine is empty
  • Gate Titan integrated mosfet
  • No bolt stop system necessary to resume fire
  • ICFU requires special magazine, not possible to use regular M4 AEG Magazine
  • Please never update the Firware, that would delete the ICFU fonction permently

 VIDEO ICFU Magazine

This option feature a modified Jefftron Leviathan module combined with ICFU System (Integrated Custom Firestop Upgrade) : the system makes stop firing the replica when there is no BB left in the magazine, just like a PTW !

  • Stop BBs when magazine is empty
  • Jefftron Leviathan integrated mosfet
  • No bolt stop system necessary to resume fire
  • ICFU requires special magazine, not possible to use regular M4 AEG Magazine
  • Please never update the Firware, that would delete the ICFU fonction permently

 VIDEO  ICFU Magazine

Airsoft gun Law

This airsoft replica is subject to the french Decree No. 99-240 of March 24, 1999, which regulates the law of replica firearms developing an output energy from the muzzle greater than 0.08 joule and equal to or less than 2 joules. This product is intended for recreational use only. By adding this product to your cart, you acknowledge:

  • Being older than 18
  • Master the basic safety rules concerning the use of this type of replica (wearing protective glasses, playing in a suitable and private place, etc.).
  • Never expose the replica in a public place because it can be mistaken for a real weapon with all the disastrous consequences that this implies
  • Being in full knowledge of the airsoft laws in your local country and buying knowingly, Powair6 cannot be responsible in the case of illegal importation.
  • Never point or shoot at a person, animal or any other object representing any danger.
  • Do not aim with your replica until you are ready to shoot at the target you have selected.
  • Do not shoot on a hard surface, risk of the ball bouncing, or in water, which could cause dangerous ricochets.
  • Do not aim the shot at the eyes or ears.
  • Do not use airsoft without wearing goggles or a protective mask.
  • Do not attempt to modify or disassemble the product in order to increase its firing power. It can be dangerous and will void the warranty.
  • Always be sure to keep the safety “ON” when you are no longer using the product.
  • Never look into the barrel, a BB may be hurt your eyes.

P6 Customs

P6 Customs

See all products from P6 Customs

Questions 

Pas de question client pour le moment.

Seuls les utilisateurs enregistrés peuvent poser une question. Login

Avis

Seuls les clients enregistrés peuvent poster un avis. Connectez-vous ou créez un compte .
Tri:

Aucun avis pour le moment.