AirsoftPro CNC Hop-Up chamber Gen3 for M24

The third generation of the AirsoftPro Hop-Up chamber for the Snow Wolf and CYMA M24 manual sniper rifles is made entirely from one piece of 6061-T6 aluminum alloy with a red anodized surface. It is a very resistant and very light material. The total weight of the chamber is only 29g. This is not a registered trademark, i.e. a repackaged product from another manufacturer. The chamber was manufactured on premium precision CNC machines. A quality chamber is an important prerequisite for the stability and good performance of the weapon. Only metal machined chambers provide the highest precision production without inaccuracies or burrs.

• The chamber is CNC machined from a highly durable 6061-T6 aircraft aluminum (Dural) with a red anodized finish
• The pressure arm is also manufactured on CNC machines and is equipped with a return spring for more reliable function
• The arm has a longer groove and senses a longer working stroke of the plastic adjustment rod
• There are two rubber stops between the chamber and the breech to absorb the shock, reduce the blast of the barrel and thus improve the precision of the shot
• A centering ring is included for easy assembly/disassembly and proper alignment of the barrel with the rifling
• The chamber is compatible with original Snow Wolf and CYMA barrels and elastics. No modification is necessary to use it
• The included AEG rubber adapter allows barrels to be used with an electric gun rubber band (AEG) with better sealing results than the supplied O-ring
• The chamber is compatible with the original Snow Wolf and CYMA Hop-Up plastic regulator pull tabs. No modification is necessary to use it
• There is a thread in the top of the chamber to bolt on a TDC device if necessary
• The chamber is compatible with Snow Wolf M24 (SW-04) and CYMA M24 (CM.702) models.