HPA M4 Magazine kit for HI-CAPA series GBB

Quantity discount available

The PTS Enhanced Polymer Magazine is their new 150 Round Mid-capacity Polymer Magazine for AEGs. Externally it features a Dupont Polymer shell, with recessed panels for better grip, and unique magazine well guides that reduce snagging. When the magazine is fully loaded, at the base of the see-through bullet window, an orange follower comes into view as well as the fake 556 bullets which only for show. It allows the end user to pick up any EPM magazine and immediately know if the magazine is filled to capacity and ready to go as it also acts a visual indicator for the user to show that it's full. The bottom of the base plate has been designed with an angled surface and a rubber overmold on the lower face. This combination of features allows the end user to rest the gun on any flat shooting platform and have more surface contact with better traction and therefore greater stability.

It is compatible with Version 2 M4 AEGs such as:

• Tokyo Marui,
• KWA,
• PTS PDR-C,
• PTS ERGs,
• PTS Masada,
• G&P AEGs,
• VFC 416,
• And the CA 416.

Features:

• 150 Round Capacity
• Orange Full Indicator
• Rubber Floorplate
• Durable DuPont Polymer material

The PTS® Enhanced Polymer Magazine ONE, or EPM1, is the most advanced and highest capacity spring loaded AEG magazine ever produced. Aptly named the EPM1, the magazine is the FIRST in many ways:

• The EPM1 is the First collaborative development between PTS and Odin Innovations
• The EPM1 is the First spring loaded AEG magazine to rival the capacity of a high cap mag with an approximate 250 bb capacity
• The EPM1 is the First AEG magazine with a “Fuel Gauge” window to indicate full or remaining bb load
• The EPM1 is the First magazine to reliably achieve both high load capacity and high rate of fire performance

Externally, the EPM1 has also been updated significantly.  As with the original EPM and all PTS polymer products, the EPM1 shell is made with Dupont Zytel® polymer which makes it extremely durable and strong.  Another carryover feature is the continuous mag well guide to reduce snagging when drawing from or inserting into pouches or the rifle mag well.  Our signature EP texture has been implemented onto the shell to give the magazine a positive texture for better grip and tactile feel.  The texture along the spines have been changed to ridges for even more positive tactility and allows the EPM1 to be compatible with the Magpul Maglink® Coupler. 

The baseplate of the EPM1 has also been completely redesigned.  The slide-in design makes the baseplate more durable and resistant to damage or popping off if the magazine is dropped.  It is also significantly slimmer than the first generation EPM’s so stacking the magazines in pouches or during storage takes up less space than before.  The basepad’s heel is angled to be able to act as a monopod during supported shooting and, as before, a marking matrix is incorporated into the basepad for magazine identification use.  The ribbed front ledge that provides positive indexing of the magazine when drawing from a pouch or plate carrier is now incorporated into the EPM1’s main body.

The new enhanced magazine follower is the result of our design collaboration with Deranged Designs. The improved follower keeps the pressure of the spring concentrated in line with the bb stack instead adding sideways pressure to the bb stack and against the walls of the magazine bb channel. This new follower design greatly improves the bb feeding speed and consistency and completely prevents bbs from sliding past the follower and creating a jam.

The most significant and innovative external feature of the EPM1 is the Fuel Gauge window.  With the new unique orange mag level indicator, you can immediately know if the magazine is filled to capacity, its approximate remaining capacity, or if the magazine is empty. When the magazine is fully loaded, mag level indicator will show at the top of the window. As you fire the bb’s out of the EPM1, the orange indicator will travel down the window until it reaches the bottom of the window at which time the magazine is emptied.

This high capacity AEG magazine holds 250+ rounds with the same reliability that all PTS magazines have long been famous for. It is compatible with most Airsoft AR-15 M4 AEGs including Tokyo Marui, KWA, G&P, VFC, including the HK416, PTS PDR-C, PTS ERG series, PTS Masada AEG, the AMOEBA AM Variants, and many more.

Features :

• Dupont Zytel® polymer shell
• 250 BBs capacity
• Orange mag level indicator
• High efficiency compression spring
• Low friction internal shell
• Unique magazine mag well guide that reduce snagging
• EP dot pattern texture for better grip
• New polymer baseplate with angled surface and dot matrix
• New design follower prevents bbs jam

Specifications :

• Color – Black
• Material – Dupont™ Zytel High Performance Reinforced Polymer
• Dimension – 180 x 72 x 26mm
• Weight – 207g approx. empty
• Capacity – 250+ rounds
• Compatibility : Tokyo Marui Style AR-15 AEG,G&P AR-15 AEG, PTS ERG AR-15 AEG, PTS Masada AEG, PTS PDR-C AEG, VFC AR-15 & HK416 AEG Airsoft,CA AR-15 & 416 AEG Airsoft,M4 Krytac, AMOEBA AM Variants AEG Airsoft

Disclaimer: This product is for airsoft, training, and simulation purposes only.  Utilizing Airsoft products improperly, including in real firearm applications, are potentially dangerous and may cause serious injury.  PTS will not accept any responsibility or liability for misuse of this product.

We draw your attention for some important points before placing your order :

• Keeping a magazine fully compressed for an extended period of time creates a risk of spring damage. No guarantee will be made for sagging springs.
• Use a flawless BBS with perfect smoothness. The internal system of the mag  cannot become blocked unless two BBS get stuck each other. In that case no warranty for product manufacturing defect can be claimed.
• The capacity of 250 Bbs is a manufacturer's announcement, This capacity is difficult to reach because the spring is extremly powerful. Powair6 advises to self limit the quantity to 220 BBs inside the magazine

The PTS EPM1-S AEG magazine, made with the same technology as our EPM1, is a 20R length short M4 magazine that holds an incredible 170 round bb capacity and offers the same reliability that all PTS magazines have long been famous for. It is compatible with most Airsoft AR-15 M4 AEGs including Tokyo Marui, KWA, G&P, VFC, including the HK416, PTS PDR-C, PTS ERG series, PTS Masada AEG, the AMOEBA AM Variants, and many more. The magazine is available in Black and Dark Earth.

About the EPM1

The PTS® Enhanced Polymer Magazine ONE, or EPM1, is the most advanced and highest capacity spring loaded AEG magazine ever produced. Aptly named the EPM1, the magazine is the FIRST in many ways:

• The EPM1 is the First collaborative development between PTS and Odin Innovations
• The EPM1 is the First spring loaded AEG magazine to rival the capacity of a high cap mag with an approximate 170 bb capacity
• The EPM1 is the First AEG magazine with a “Fuel Gauge” window to indicate full or remaining bb load
• The EPM1 is the First magazine to reliably achieve both high load capacity and high rate of fire performance

Features :

• Dupont Zytel® polymer shell
• Orange mag level indicator
• High efficiency compression spring
• Low friction internal shell
• Unique magazine mag well guide that reduce snagging
• EP dot pattern texture for better grip
• New polymer baseplate with angled surface and dot matrix
• New design follower prevents bbs jam

Specifications :

• Material – Dupont™ Zytel High Performance Reinforced Polymer
• Compatibility : Tokyo Marui Style AR-15 AEG,G&P AR-15 AEG, PTS ERG AR-15 AEG, PTS Masada AEG, PTS PDR-C AEG, VFC AR-15 & HK416 AEG Airsoft,CA AR-15 & 416 AEG Airsoft,Krytac,AMOEBA AM Variants AEG Airsoft

Disclaimer: This product is for airsoft, training, and simulation purposes only.  Utilizing Airsoft products improperly, including in real firearm applications, are potentially dangerous and may cause serious injury.  PTS will not accept any responsibility or liability for misuse of this product.

We draw your attention for some important points before placing your order :

• Keeping a magazine fully compressed for an extended period of time creates a risk of spring damage. No guarantee will be made for sagging springs.
• Use a flawless BBS with perfect smoothness. The internal system of the mag  cannot become blocked unless two BBS get stuck each other. In that case no warranty for product manufacturing defect can be claimed.
• The capacity is a manufacturer's announcement, This capacity is difficult to reach because the spring is extremly powerful. Powair6 advises to self limit the quantity to 220 BBs for EPM1 and 150 BBs for EPM1-S

The PTS EPM1-S AEG magazine, made with the same technology as our EPM1, is a 20R length short M4 magazine that holds an incredible 170 round bb capacity and offers the same reliability that all PTS magazines have long been famous for. It is compatible with most Airsoft AR-15 M4 AEGs including Tokyo Marui, KWA, G&P, VFC, including the HK416, PTS PDR-C, PTS ERG series, PTS Masada AEG, the AMOEBA AM Variants, and many more. The magazine is available in Black and Dark Earth.

About the EPM1

The PTS® Enhanced Polymer Magazine ONE, or EPM1, is the most advanced and highest capacity spring loaded AEG magazine ever produced. Aptly named the EPM1, the magazine is the FIRST in many ways:

• The EPM1 is the First collaborative development between PTS and Odin Innovations
• The EPM1 is the First spring loaded AEG magazine to rival the capacity of a high cap mag with an approximate 170 bb capacity
• The EPM1 is the First AEG magazine with a “Fuel Gauge” window to indicate full or remaining bb load
• The EPM1 is the First magazine to reliably achieve both high load capacity and high rate of fire performance

Features :

• Dupont Zytel® polymer shell
• Orange mag level indicator
• High efficiency compression spring
• Low friction internal shell
• Unique magazine mag well guide that reduce snagging
• EP dot pattern texture for better grip
• New polymer baseplate with angled surface and dot matrix
• New design follower prevents bbs jam

Specifications :

• Material – Dupont™ Zytel High Performance Reinforced Polymer
• Compatibility : Tokyo Marui Style AR-15 AEG,G&P AR-15 AEG, PTS ERG AR-15 AEG, PTS Masada AEG, PTS PDR-C AEG, VFC AR-15 & HK416 AEG Airsoft,CA AR-15 & 416 AEG Airsoft,Krytac,AMOEBA AM Variants AEG Airsoft

Disclaimer: This product is for airsoft, training, and simulation purposes only.  Utilizing Airsoft products improperly, including in real firearm applications, are potentially dangerous and may cause serious injury.  PTS will not accept any responsibility or liability for misuse of this product.

We draw your attention for some important points before placing your order :

• Keeping a magazine fully compressed for an extended period of time creates a risk of spring damage. No guarantee will be made for sagging springs.
• Use a flawless BBS with perfect smoothness. The internal system of the mag  cannot become blocked unless two BBS get stuck each other. In that case no warranty for product manufacturing defect can be claimed.
• The capacity is a manufacturer's announcement, This capacity is difficult to reach because the spring is extremly powerful. Powair6 advises to self limit the quantity to 220 BBs for EPM1 and 150 BBs for EPM1-S

Bo manufacture / Lonex 200 rounds mid cap polymer magazine for M4 AEG

- Spring operated

- 200 rounds capacity !

Bo manufacture / Lonex 200 rounds mid cap polymer magazine for M4 AEG

- Spring operated

- 200 rounds capacity !

Bo manufacture / Lonex 200 rounds mid cap polymer magazine for M4 AEG

- Spring operated

- 200 rounds capacity !

The QMAG from VFC is a new magazine line by VFC that is entirely differnt to what they had before. The QMAG is a polymer magazine that fits all Umarex VFC M4 AEG series and 416 AEG series magwell. It has diamond hexagonal shape composite reinforced ribs and anti-skid textured surface to ensure the magazine has enough grip on it in every condition. The floor plate is also designed to be reinforced in structure for higher durability and shaped to be easier to be pulled out from your magazine pouches. The mid-cap version holds 120 rounds.

The QMAG from VFC is a new magazine line by VFC that is entirely differnt to what they had before. The QMAG is a polymer magazine that fits all Umarex VFC M4 AEG series and 416 AEG series magwell. It has diamond hexagonal shape composite reinforced ribs and anti-skid textured surface to ensure the magazine has enough grip on it in every condition. The floor plate is also designed to be reinforced in structure for higher durability and shaped to be easier to be pulled out from your magazine pouches. The mid-cap version holds 120 rounds.

The QMAG from VFC is a new magazine line by VFC that is entirely differnt to what they had before. The QMAG is a polymer magazine that fits all Umarex VFC M4 AEG series and 416 AEG series magwell. It has diamond hexagonal shape composite reinforced ribs and anti-skid textured surface to ensure the magazine has enough grip on it in every condition. The floor plate is also designed to be reinforced in structure for higher durability and shaped to be easier to be pulled out from your magazine pouches. The Hi-cap version holds 300 rounds.

The QMAG from VFC is a new magazine line by VFC that is entirely differnt to what they had before. The QMAG is a polymer magazine that fits all Umarex VFC M4 AEG series and 416 AEG series magwell. It has diamond hexagonal shape composite reinforced ribs and anti-skid textured surface to ensure the magazine has enough grip on it in every condition. The floor plate is also designed to be reinforced in structure for higher durability and shaped to be easier to be pulled out from your magazine pouches. The Hi-cap version holds 300 rounds.